This USB 3.2 Gen1 HDBaseT wall plate extender enabling up to 100m USB device extension over CAT6A with 2 USB host switching and up to 5Gbps bandwidth.
The UEX3H-WP-US supports USB 2.0/1.1, uses bi-directional PoC, and allows auto/manual host selection via front panel or RS-232.
Blustream UEX3H-WP-US USB 3.2 Gen1 HDBaseT Extender US Wall Plate - Host Features:
- USB 3.2 Gen1 HDBaseT Extender supporting 2 x USB Host devices and 2 x local USB Devices
- Supports USB 3.2 signal extension up to 100m over HDBaseT *
- Backwards compatible with USB 2.0 & 1.1 devices
- Combined USB3.2 Gen1 data transfer rate up to 5Gbps *
- 1 x USB-A & 1 x USB-C port for connection to host devices with manual or auto switching
- 2 x USB-A ports for connection to local devices
- 1 x USB-C host charging port for connection of external power supply to power host device
- Provides up to 500mA combined power to USB devices (up to 500mA per single USB port)
- Configurable USB device power management via API commands
- Bi-directional PoC (Power over Cable) to power extenders from either the host or device unit (supports 12-48V PoC)
- Supports bi-directional RS-232 when used with compatible HDBaseT products
- PoC function can be enabled/disabled via dipswitch
- Simple plug and play, no driver installation or setup required
Why not buy this Blustream UEX3H-WP-US USB 3.2 Gen1 HDBaseT Extender US Wall Plate - Host form HDTV Supply today?
Blustream UEX3H-WP-US USB 3.2 Gen1 HDBaseT Extender US Wall Plate - Host Specification
- CAT Connectors: 1 x RJ45 connector
- USB Host Ports: 1 x USB Type C female, 1 x USB Type A female
- USB Device Ports: 2 x USB Type C female
- USB-C Charging Port: 1 x USB Type C female (provides charging for USB-C host)
- Local power input: 1 x 2-Pin Phoenix connector
- Firmware Upgrade: 1 x Micro-USB
- RS-232: 1 x 3-Pin Phoenix connector
- Power Supply: 24V/1.25A DC
- Dimensions (W x H x D): 136mm x 76mm x 46mm (without faceplate)
- Faceplate Dimensions (W x H x D): 146mm x 86mm x 6mm (faceplate)
- Mounting hole spacing: UK 121mm CTC, EU 60mm CTC
- Backbox Mounting Depth: 40mm (minimum), 47mm (recommended), UK or EU double gang
- Shipping Weight: 0.8kg
- Operating Temperature: 32°F to 104°F (-5°C to +55°C)
- Storage Temperature : -4°F to 140°F (-25°C to +70°C)
Why not buy this Blustream UEX3H-WP-US USB 3.2 Gen1 HDBaseT Extender US Wall Plate - Host form HDTV Supply today?
Blustream UEX3H-WP-USS User Manuals
Blustream UEX3H-WP-US Datasheet
Why not buy this Blustream UEX3H-WP-US USB 3.2 Gen1 HDBaseT Extender US Wall Plate - Host form HDTV Supply today?
How far can USB 3.2 Gen1 data be extended over the HDBaseT link and what cable is recommended?
A: USB 3.2 Gen1 data can be extended up to 100 m (328 ft) over a single HDBaseT CAT cable, and a minimum of CAT6A cable is recommended.
What USB data rates and backward compatibility does the product support?
A: The unit supports USB 3.2 Gen1 with a combined transmission bandwidth up to 5 Gbps and is backwards compatible with USB 2.0 and 1.1.
Does the UEX3H-WP-US support Power over Cable (PoC) and how is it controlled?
A: Yes — it supports bi-directional PoC (12–48 V) and the PoC function can be enabled or disabled with a dipswitch on the unit.
Can I control host switching from automation systems using RS-232?
A: Yes — the UEX3H-WP-US supports RS-232 host switching and offers serial commands for control.
How do I switch between Host 1 and Host 2 on the wall-plate unit?
A: Use the front-panel Select button to toggle between Host 1 and Host 2, and press-and-hold for 3 seconds to switch between auto and manual modes.
Will this unit pass USB-C video (DP Alt Mode) from a laptop?
A: No — the UEX3H-WP-US does not support USB-C DP Alt Mode video pass-through; it carries USB data only.
How should the interconnecting HDBaseT CAT cable be terminated for this extender?
A: Use a straight (pin-to-pin) CAT cable wired to the T568B RJ45 standard and a minimum of CAT6A cable quality is advised.
What do the HDBaseT link and data LEDs indicate?
A: The orange HDBaseT link LED shows link presence (off=no link, blinking=unstable, on=active) and the green HDBaseT data LED shows whether USB data is being transmitted (off=no data, on=data present).
