The Blustream UEX3D extends USB 3.2 over CAT6A up to 100m, supporting 4 USB devices (A/C) at up to 5Gbps with a compatible receiver.
The UEX3D extends USB 3.2 Gen1 devices over HDBaseT, supports USB 2.0/1.1, and uses bi-directional PoC for power from either end. Ideal for cameras, KVM, storage, audio, and other USB devices.
Blustream UEX3D USB 3.2 Gen1 HDBaseT Extender - Device Features:
- USB 3.2 Gen1 HDBaseT Extender supporting 2 x USB Host devices and 2 x local USB Devices
- Supports USB 3.2 signal extension up to 100m over HDBaseT *
- Backwards compatible with USB 2.0 & 1.1 devices
- Combined USB3.2 Gen1 data transfer rate up to 5Gbps *
- 2 x USB-A & 2 x USB-C port for connection to local devices
- Provides up to 3A combined power to USB devices (up to 1.7A per single USB port)
- Configurable USB device power management via API commands
- Bi-directional PoC (Power over Cable) to power extenders from either the host or device unit (supports 12-48V PoC)
- Supports bi-directional RS-232 when used with compatible HDBaseT products
- PoC function can be enabled/disabled via dipswitch
- Simple plug and play, no driver installation or setup required
- Compatible with Blustream UEX3H and UEX3H-WP
Why not buy this Blustream UEX3D USB 3.2 Gen1 HDBaseT Extender - Device form HDTV Supply today?
Blustream UEX3D USB 3.2 Gen1 HDBaseT Extender - Device Specification
- CAT Connectors: 1 x RJ45 connector
- USB Device Ports: 2 x USB Type C female, 2 x USB Type A female
- Local power input: 1 x 2-Pin Phoenix connector
- Firmware Upgrade: 1 x Micro-USB
- RS-232: 1 x 3-Pin Phoenix connector
- Power Supply: 24V/1.5A DC
- Dimensions (W x D x H ): 133mm x 105mm x 22mm
- Shipping Weight: 1.0kg
- Operating Temperature: 32°F to 104°F (-5°C to +55°C)
- Storage Temperature : -4°F to 140°F (-25°C to +70°C)
Why not buy this Blustream UEX3D USB 3.2 Gen1 HDBaseT Extender - Device form HDTV Supply today?
Why not buy this Blustream UEX3D USB 3.2 Gen1 HDBaseT Extender - Device form HDTV Supply today?
Will this unit work with a Blustream UEX3H (Host) extender?
A: Yes. The UEX3D is designed to connect to a compatible Blustream USB HDBaseT Receiver (Host) such as the UEX3H.
What USB ports does the UEX3D provide?
A: The UEX3D provides two USB Type‑C ports and two USB Type‑A ports for connecting USB devices.
Does the package include a power supply and RS-232 cable?
A: Yes. The package includes a 24V/1.5A power supply and an RS‑232 control cable (3‑Pin to DB9).
Can the UEX3D power the USB devices I plug into it?
A: Yes. The unit can provide up to 3 A total to connected USB devices, with a maximum of 1.7 A available per individual USB port.
Do I need CAT6A cable to reach the full 100 m distance?
A: Yes; the manual recommends using a minimum of CAT6A cabling for installations, especially for longer runs or high EMI areas.
Will this extender carry USB‑C video (DP Alt Mode) from a laptop?
A: No. This product is for USB 3.2 data transfer only and does not support DP Alt Mode video pass‑through.
How can I check the HDBaseT link and data status on the unit?
A: The HDBaseT RJ45 includes status LEDs: an orange link LED (off, blinking, or lit for no/unstable/active link) and a green data LED (off or on for no data/data present).
