The Blustream UEX3C-KIT is a USB 3.2 Gen1 extender kit using HDBaseT technology to extend signals up to 100m over a single CAT6A cable. It supports up to two USB devices on one host, delivers up to 5Gbps bandwidth, is backward compatible with USB 2.0/1.1, and includes bi-directional Power over Cable (PoC).
Blustream UEX3C-KIT 100m USB 3.2 Gen1 Extender Features:
- Supports USB 3.2 signal extension up to 100m*
- Backwards compatible with USB 2.0 & 1.1 devices
- USB3.2 Gen1 data transfer rate up to 5Gbps*
- 1x USB-C port on the receiver for connection to host device
- 1x USB-C host charging port for connection of external power supply to power host device
- 1x USB-A & 1x USB-C port on transmitter for connection to devices
- Provides up to 2.5A combined power to USB devices (up to 1.7A per single USB port)
- Configurable USB device power management via API commands
- Bi-directional PoC (Power over Cable) to power extenders from either the host or device unit
- PoC function can be enabled/disabled via dipswitch
- Simple plug and play, no driver installation or setup required.
Why not buy this Blustream UEX3C-KIT 100m USB 3.2 Gen1 Extender today?
Blustream UEX3C-KIT 100m USB 3.2 Gen1 Extender Specification
- UEX3C-H
- USB Host Connectors: 1x USB-C, female
- USB Charge Connectors: 1x USB-C, female
- CAT Connectors: 1x HDBaseT RJ45 connector
- Upgrade Port: 1x Micro USB connector
- Casing Dimensions (W x D x H): 130mm x 61mm x 22mm
- Power Supply: 24V/1.25A DC, 2-pin Phoenix connector
- UEX3C-D
- USB Host Connectors: 1x USB-C, female, 1x USB-A, female
- USB Charge Connectors: 1x USB-C, female
- CAT Connectors: 1x HDBaseT RJ45 connector
- Upgrade Port: 1x Micro USB connector
- Casing Dimensions (W x D x H): 130mm x 61mm x 22mm
- Power Supply: 24V/1.25A DC, 2-pin Phoenix connector
- UEX3C-KIT
- Box Dimensions (W x D x H): 215mm x 150mm x 63mm
- Shipping Weight: 1.0kg
- Operating Temperature: 32°F to 104°F (-5°C to +55°C)
- Storage Temperature: -4°F to 140°F (-25°C to +70°C)
Why not buy this Blustream UEX3C-KIT 100m USB 3.2 Gen1 Extender today?
What maximum USB data rate does this extender support?
A: It supports USB 3.2 Gen1 data transfer rates up to 5 Gbps.
How far can I extend a USB connection with this kit?
A: It can extend USB 3.2 signals up to 100 m over a single CAT6A cable.
What ports are on the transmitter and receiver units?
A: The transmitter has one USB-A and one USB-C port; the receiver has one USB-C host connector and a separate USB-C host charging connector.
Does the kit provide power to connected USB devices and how much?
A: Yes; the kit provides up to 2.5 A combined power to USB devices, with up to 1.7 A available per single USB port.
Does the extender support Power over Cable (PoC) and can it be controlled?
A: Yes; it supports bi-directional PoC to power extenders from either unit, and the PoC function can be enabled or disabled via a dipswitch.
Can I connect two USB devices to one host through this kit?
A: Yes; the kit supports up to two USB devices on one host.
Will this work with older USB 2.0 or 1.1 devices?
A: Yes; the extender is backward compatible with USB 2.0 and USB 1.1 devices.
Can I charge or power the host device from the receiver unit?
A: The receiver includes a USB-C host charging connector intended for connection of an external power supply to power the host device.
Does the kit require any drivers or special setup?
A: No; the kit is described as simple plug-and-play with no driver installation or setup required.
What are the operating and storage temperature ranges?
A: Operating temperature is 32°F to 104°F (-5°C to +55°C), and storage temperature is -4°F to 140°F (-25°C to +70°C).
