This Blustream SW12USB 10Gb USB 3.2 Gen 2 Switch is a USB 3.2 Gen2 10Gb switcher, supporting 4 x USB devices that can be switched to 2 x USB-C host connections. The SW12USB supports auto switching between host devices using signal sense, or manually controlled via the front-panel push buttons, Web-GUI, TCP/IP, or RS-232.
Blustream SW12USB 10Gb USB 3.2 Gen 2 Switch Features:
- USB 3.2 Gen2 switch allowing up to 4 x USB peripheral devices to connect to 2 x USB hosts
- Features 2 x USB-C and 2 x USB-A device inputs and 2 x USB-C hosts
- USB 3.2 Gen2 connectivity with data transfer rate up to 10Gbps
- Backwards compatible with USB 2.0 and 1.1
- Auto or manual switching
- Plug-and-play with no drivers, downloads, or software required
- Features 1 x GPI port for integration with 3rd party products
- Features 802.3at PoE+ for powering of product from PoE+ network
- Local 24v power supply input for when network switch does not support PoE+
- Web interface module for control and configuration of SW12USB
- Control via front panel buttons, RS-232, or TCP/IP
Why not buy this Blustream SW12USB 10Gb USB 3.2 Gen 2 Switch form HDTV Supply today?
Blustream SW12USB 10Gb USB 3.2 Gen 2 Switch Specification
- USB Device: 2 x USB Type A female, 2 x USB Type C female
- USB Host: 2 x USB Type C female
- GPI / RS-232 Serial Port: 1 x 4-pin Phoenix connector
- TCP/IP Control: 1 x RJ45, female
- Firmware Upgrade: 1 x Micro-USB
- Dimensions (W x D x H): 150mm x 110mm x 23mm
- Shipping Weight: 0.6kg
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature: -4°F to 140°F (-20°C to 60°C)
- Power Supply: 24V/1.25A DC, 4-pin DIN connector
Why not buy this Blustream SW12USB 10Gb USB 3.2 Gen 2 Switch form HDTV Supply today?
Blustream SW12USB User Manuals
Why not buy this Blustream SW12USB 10Gb USB 3.2 Gen 2 Switch form HDTV Supply today?
What physical USB ports does the SW12USB provide?
A: The SW12USB provides 2 × USB Type‑C host ports and four device inputs made up of 2 × USB‑C and 2 × USB‑A ports.
Does the SW12USB include a power supply in the box?
A: Yes; the package contents list a 24V/1.25A DC power supply included with the SW12USB.
Can the SW12USB be powered from a network switch?
A: Yes; the SW12USB supports 802.3at PoE+ so it can be powered from a PoE+ network.
What control and configuration methods are available for the switch?
A: You can control and configure the SW12USB from the front‑panel buttons, Web‑GUI (TCP/IP), RS‑232, or via firmware upgrades using the Micro‑USB.
Is a serial control cable included and what type is it?
A: Yes; the package contents list a 3‑pin phoenix to DB9 serial cable included with the unit.
Will the SW12USB let me connect four USB devices and switch them to two hosts?
A: Yes; the SW12USB accepts up to four USB peripheral devices and can switch them between two USB‑C hosts.
Can the switch change hosts automatically when a host is connected?
A: Yes; the unit supports automatic switching (auto mode) based on signal sense and can also be set to manual switching.
Does the SW12USB pass DisplayPort Alt Mode video over USB-C?
A: No; the SW12USB does not pass DP Alt Mode video.
Can I limit the USB‑A port speed on the SW12USB?
A: Yes; the Web‑GUI and API can limit each USB‑A port between USB 3.2 Gen 1 (5Gbps) and USB 3.2 Gen 2 (10Gbps).
What are the SW12USB's default network login and IP settings?
A: By default the device uses DHCP and, if no DHCP server is available, the unit defaults to IP 192.168.0.200 with username blustream and password 1234 (note later firmware versions use a different default password).
