This Blustream NPA70DA Dante Networked Power Amplifier delivers advanced audio integration within a commercial or residential AV installation.
The NPA70DA features a 2 x 35W digital amplifier (1 x 70W mono) or 70V / 100V hi-level constant voltage output and Dante® audio integration.
The NPA70DA can be powered via PoE++ from a compatible network switch, or locally should the switch not support PoE++. The unit also includes the ability to lower the amplifier power output subject to PoE capabilities, support for combined or independent LAN and Dante® connections, DSP with a 31 band EQ, audio delay for lip sync correction, and control via front panel, IR, RS-232, TCP/IP, web-GUI or 12V trigger.
Blustream NPA70DA Dante Networked Power Amplifier Features:
- Advanced network audio amplifier with Dante® integration
- Supports 2 x 35W @ 4 / 8 ohm, 1 x 70W @ 4 / 8 ohm or 70 / 100V constant output for multiple speakers with longer cable runs
- Supports power via PoE++ on Dante® LAN connection or local power supply*
- Dual network option - independent Dante® and LAN control ports, or combined to a single LAN
- 2ch Dante® / AES67 audio input
- DSP with 31 band EQ with +3dB/-10dB and audio delay
- Local 12V input trigger for automated power control
- Control via front panel, IR, RS-232 and IP
- Auto standby mode with signal sensing
- In-built web-GUI for setup and control
* Amp power limited when using PoE+
Why not buy this Blustream NPA70DA Dante Networked Power Amplifier today?
Blustream NPA70DA NPA70DA Dante Networked Power Amplifier Specifications:
- Audio Inputs: 1 x RJ45 Dante® Audio connection
- Audio Outputs: 1 x 4-Pin Phoenix connector (4 / 8 ohm speaker), 1 x 3-Pin Phoenix connector (70 / 100V speaker)
- Ethernet Port: 1 x LAN RJ45 connector (Dante®), 1 x LAN RJ45 connector (Network)
- RS-232 Serial Port: 1 x 3-Pin Phoenix connector
- IR Input Ports: 1 x 3-Pin Phoenix connector
- Trigger Input: 1 x 2-Pin Phoenix connector
- Rack Mountable: 19” Rack mounting and wall / surface mounting kit included
- Casing Dimensions (W x H x D): 202mm x 175mm x 31mm
- Dimensions Including Connections (W x H x D): 245mm x 175mm x 31mm
- Shipping Weight: 1.8kg
- Operating Temperature: 32°F to 104°F (0°C to +40°C)
- Storage Temperature: -4°F to 140°F (-20°C to +60°C)
- Power Supply: PoE++ Type 4, or 24V/3.5A DC 4-pin DIN
Box Contents
- 1 x NPA70DA
- 1 x 24V/3.5A power supply
- 1 x Remote control
- 1 x IR Receiver
- 1 x Rack mounting kit
- 1 x Wall / surface mounting kit
- 4 x Rubber feet
- 1 x User Manual
Why not buy this Blustream NPA70DA Dante Networked Power Amplifier today?
Does the NPA70DA include a power supply in the box?
A: Yes. The box includes a 24V/3.5A power supply.
Can the amplifier be powered from a network switch using PoE?
A: Yes. The NPA70DA can be powered via PoE++ from a compatible network switch.
Will PoE power the amplifier at full wattage?
A: No. Amplifier power is limited when using PoE+ or lower PoE tiers.
What network audio and control ports does the NPA70DA have?
A: It provides a Dante RJ45 audio port plus a separate LAN RJ45 network port, and supports combined or independent Dante and LAN connections.
What audio output connections are provided for speakers?
A: The unit has a 4-pin Phoenix connector for 4/8 ohm speakers and a 3-pin Phoenix connector for 70/100V constant-voltage speakers.
Can I use this amp for two-channel stereo and mono bridging?
A: Yes. It supports 2 x 35W stereo or 1 x 70W mono operation at 4/8 ohm.
Will this work with Dante audio on my network?
A: Yes. The NPA70DA includes Dante audio integration with a 2-channel Dante/AES67 input over its RJ45 Dante port.
How can I control the NPA70DA remotely?
A: You can control it via front panel, IR, RS-232, TCP/IP (web-GUI), or a 12V trigger.
Does the NPA70DA include mounting hardware for rack or wall installation?
A: Yes. The box includes a 19" rack mounting kit and a wall/surface mounting kit.
Can I apply EQ and delay from the amplifier itself?
A: Yes. The amplifier includes DSP with a 31-band EQ and audio delay for lip-sync correction.
