The Blustream NPA20ARC is a compact 2-channel HDMI ARC network amplifier for small commercial or residential AV systems, delivering 2×10W stereo or 1×20W mono output with direct ARC support. It features PoE/PoE+ or local power, built-in DSP with 31-band EQ and lip-sync adjustment, flexible control via IP, RS-232, web GUI, and 12V trigger, and supports daisy-chaining of up to four units.
Blustream NPA20ARC 2-Ch HDMI ARC Networked Power Amplifier Features:
- Advanced network audio amplifier with 2ch HDMI ARC and analogue audio inputs
- Supports 2 x 10W @ 4 / 8 ohm, 1 x 20W @ 4 / 8 ohm
- Supports power via PoE+ on LAN connection or local power supply*
- 2ch HDMI ARC audio input
- 2ch balanced / unbalanced audio in and out with master / slave amp control feature allowing daisy chain of up to 4x NPA20ARC or NPA20ANA amplifiers
- DSP with 31 band EQ with +3dB/-10dB and audio delay
- Local 0V / 5~12V input trigger for automated power control
- Control via ARC, front panel, RS-232 and IP
- Auto standby mode with signal sensing
- In-built web-GUI for setup and control
Why not buy this Blustream NPA20ARC 2-Ch HDMI ARC Networked Power Amplifier today?
Blustream NPA20ARC 2-Ch HDMI ARC Networked Power Amplifier Specifications:
- Casing Dimensions (W x H x D): 169mm x 144mm x 22mm
- Shipping Weight: 1.2kg
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature : -4°F to 140°F (-20°C to 60°C)
- Power Supply: PoE+ Type 2 Class 4, or 24v/1.25A DC 4-pin DIN (power supply not included)
- Audio Inputs: 1 x HDMI Type A 19-pin female ARC audio connection, 1 x 5-pin Phoenix connector (balanced/ un-balanced analogue audio)
- Audio Output Connectors: 1 x 5-pin Phoenix connector (balanced/un-balanced analogue audio)
- Speaker Outputs: 1 x 4-Pin Phoenix connector (4 / 8 ohm speaker)
- RS-232 Serial Port: 1 x 3-Pin Phoenix connector
- Trigger Input: 1 x 2-Pin Phoenix connector
Why not buy this Blustream NPA20ARC 2-Ch HDMI ARC Networked Power Amplifier today?
Blustream NPA20ARC User Manual
