This Blustream NPA100DA Networked Power Amplifier with Dante, HDMI ARC, Optical S/PDIF, Mic Input including 48V Phantom Power, DSP. PoE++
Our NPA100DA networked audio zone amplifier delivers advanced audio integration within a commercial or residential AV installation.
The NPA100DA features a 2x 50W digital amplifier (1 x 100W mono) or 70V / 100V hi-level constant voltage output, dedicated LFE subwoofer output, Dante audio integration and 2ch balanced / un-balanced audio outputs.
The NPA100DA supports a variety of inputs including 2ch Dante audio, HDMI ARC, MIC audio with 48V Phantom power support, optical audio and 2ch balanced / un-balanced analog audio.
The NPA100DA can be powered via PoE++ from a compatible network switch, or locally should the switch not support PoE++. The unit also includes the ability to lower the amplifier power output subject to PoE capabilities, support for combined or independent LAN and Dante connections, DSP with a 10 band EQ, audio delay for lip sync correction, independent gain control for audio inputs and control via front panel, IR, RS-232, TCP/IP, Web Gui or 12v trigger.
Blustream NPA100DA Networked Power Amplifier with Dante Features:
- Advanced network audio amplifier with Dante integration
- Supports 2 x 50W @ 4 / 8 ohm, 1 x 100W @ 4 / 8 ohm, or 70 / 100V constant output for multiple speakers with longer cable runs
- Supports power via PoE++ on Dante LAN connection or via local power supply *
- Dual network option - independent Dante and LAN control ports, or combined to a single LAN port
- Audio inputs include:
- 2ch Dante/AES67 audio input
- HDMI ARC with CEC volume control
- MIC audio input with phantom power and auto?ducking
- 2ch analog audio input – unbalanced & balanced
- 1 x Optical (S/PDIF) audio input
- Audio outputs include:
- 2ch Dante/AES67 audio Output
- 2ch variable/fixed analog output, balanced/un?balanced
- 1 x LFE subwoofer output
- Independent gain control for input channels
- DSP with 31 band EQ with +/-10dB gain and audio delay
- Local 12V input trigger for automated power control
- Control via front panel, IR, RS?232 and IP
- Auto standby mode with signal sensing
- In?built web-GUI for setup and control
Why not buy this Blustream NPA100DA Networked Power Amplifier with Dante today?
Blustream NPA100DA Networked Power Amplifier with Dante Specifications:
- Audio Inputs: 1 x 5-Pin Phoenix connector (analog), 1 x 3-Pin Phoenix connector (MIC), 1 x HDMI Type A, 19-pin, female, locking (ARC), 1 x Optical (S/PDIF)
- Audio Outputs: 1 x 4-Pin Phoenix connector (4 / 8 ohm speaker), 1 x 3-Pin Phoenix connector (70 / 100v speaker), 1 x 5-Pin Phoenix Connector (analog audio), 1 x 2-Pin Phoenix connector (LFE subwoofer)
- Ethernet Port: 1 x LAN RJ45 connector (Dante), 1 x LAN RJ45 connector (Network)
- RS-232 Serial Port: 1 x 3-Pin Phoenix connector
- IR Input: 1 x 3-Pin Phoenix connector
- Trigger Input: 1 x 2-Pin Phoenix connector
- 19" Rack mounting and wall / surface mounting kit included
- Dimensions (W x D x H ): 250mm x 150mm x 45mm
- Dimensions Including Connections (W x D x H ): 252mm x 150mm x 45mm
- Shipping Weight: 2.8kg
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature: -4°F to 140°F (-20°C to 60°C)
- Power Supply: PoE++ Type 4, 1 x 36V/5.5A DC
Box Contents
- 1 x NPA100DA
- 1 x 36V/5.5A power supply
- 1 x Remote control
- 1 x IR receiver
- 1 x Rack mounting kit
- 1 x Wall / surface mounting Kit
- 4 x Rubber feet
- 1 x Quick reference guide
Why not buy this Blustream NPA100DA Networked Power Amplifier with Dante today?
Does the NPA100DA include a power supply in the box?
A: Yes — the box contents list a 36V/5.5A power supply included with the NPA100DA.
Can the amplifier run from PoE or does it need the local power supply?
A: It supports PoE++ on the Dante LAN connection but can also be powered locally when the network switch does not support PoE++.
What audio inputs does this model provide?
A: It provides 2‑channel Dante/AES67, HDMI ARC (with CEC volume control), a MIC input with 48V phantom power, optical (S/PDIF), and 2‑channel balanced/unbalanced analog inputs.
What audio outputs and speaker options are available?
A: It offers 2‑channel Dante/AES67 output, 2‑channel variable/fixed analog outputs (balanced/unbalanced), an LFE subwoofer output, and speaker outputs for 4/8Ω or 70/100V constant‑voltage systems.
What control and connectivity options are supported for installation and automation?
A: You can control it from the front panel, IR, RS‑232, TCP/IP/Web GUI, and a 12V trigger; it also has dual RJ45 network ports for separate Dante and LAN connections or a combined LAN port.
Will this amplifier drive two speakers at 50W each or a single speaker at 100W?
A: Yes — the NPA100DA supports 2 x 50W (stereo) or 1 x 100W (mono) into 4/8 ohm.
Can I use Dante audio and a separate network connection at the same time?
A: Yes — the unit offers a dual network option with independent Dante and LAN control ports, or you can combine them to a single LAN port.
Does the NPA100DA include DSP for EQ and lip‑sync delay?
A: Yes — it includes DSP with a multi‑band EQ and audio delay for lip‑sync correction.
Does the package include mounting hardware for rack and wall installations?
A: Yes — the package includes a 19" rack mounting kit plus a wall/surface mounting kit and rubber feet.
