This Blustream IP50HD-TX Contractor Series HD Video Transmitter over 100Mbps Network, HDMI Loop-Out, Bi-directional IR, RS-232 & USB/KVM, PoE, Analog Audio Embedding and Analog Audio Breakout.
High Definition Video over IP Transmitter. Our Contractor HD Multicast distribution platform allows distribution of AV and control signals over a 100Mbps network.
The IP50HD-TX is an industry leading 1080p HDMI transmitter that uses H.265 compression technology to deliver HDMI, Bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture.
The transmitter includes a HDMI loop-out for cascading to multiple devices and can be powered via PoE from the network switch or locally should the switch not support PoE. With multiple configuration options available the Multicast HD solution is ideal for both commercial and residential installations.
Blustream IP50HD-TX Contractor Series HD Video Transmitter over 100Mbps Network Features:
- Advanced HD video, control and KVM over network infrastructure
- Extends HDMI up to a distance of 100m over a single CAT cable
- Supports unicast transmission over unmanaged networks
- Supports multicast transmission for large managed networks
- Supports up to 1080p 60Hz
- Features 1 x HDMI loop-out for integrating local displays or cascading to multiple devices
- Supports PCM 2.0 channel audio
- Advanced signal management for independent routing of IR, RS-232, USB/KVM and video/audio
- PoE (Power over Ethernet) to power Blustream products from PoE switch
- HDCP 1.4 compliant with advanced EDID management
- Analog L/R audio embedding and audio breakout
- Local 12V 1A power supply should Ethernet switch not support PoE (not included)
- Features 2 operational modes:
- Matrix distribution (requires 100Mbps network switch)
- One-to-one HDMI extender (no network switch required)
Why not buy this Blustream IP50HD-TX Contractor Series HD Video Transmitter over 100Mbps Network today?
Blustream IP50HD-TX Contractor Series HD Video Transmitter over 100Mbps Network Specifications:
- Video input: 1 x HDMI Type A, 19-pin, female, locking
- Video output: 1 x LAN RJ45 connector, 1x HDMI Type A, 19-pin, female, locking
- Latency: 3 frames (<120ms subject to video compression, frame rate and scaling)
- Audio input: 1 x 3-pin Phoenix connector
- Audio output: 1 x 3-pin Phoenix connector
- Ethernet port: 1 x LAN RJ45 connector
- RS-232 serial port: 1 x 3-pin Phoenix connector
- USB/KVM Host Port: 1 x USB-Type B
- IR input: 1 x 3.5mm stereo jack
- IR output: 1 x 3.5mm mono jack
- PoE draw: 3.7W (typical), 4.0W (max load)
- Mounting kit included
- Dimensions (W x D x H): 190mm x 95mm x 25mm
- Dimensions Including Connections (W x D x H): 190mm x 100mm x 25mm, without feet
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature: -4°F to 140°F (-20°C to 60°C)
Box Contents
- 1 x IP50HD-TX
- 1 x IR Transmitter
- 1 x IR Emitter
- 1 x Mounting Kit
- 4 x Rubber Fee
Why not buy this Blustream IP50HD-TX Contractor Series HD Video Transmitter over 100Mbps Network today?
Blustream IP50HD-TX Contractor Series HD Video Transmitter over 100Mbps Network Manual
Blustream IP50HD-TX Contractor Series HD Video Transmitter over 100Mbps Network DataSheet
What exactly is included in the box with the IP50HD-TX?
A: The box includes the IP50HD-TX transmitter, one IR transmitter, one IR emitter, a mounting kit, and four rubber feet.
How is the IP50HD-TX powered?
A: It can be powered via PoE from a network switch or with a local 12V 1A power supply if the switch does not provide PoE (the local power supply is not included).
What video input and outputs does the IP50HD-TX have?
A: It has one HDMI Type A input and one HDMI Type A loop-out plus one LAN RJ45 output for video over the network.
Does the IP50HD-TX support HDCP and EDID management?
A: Yes; the unit is HDCP 1.4 compliant and includes advanced EDID management.
What control and auxiliary connections are available on the transmitter?
A: The transmitter provides bi-directional IR, an RS-232 port, a USB-Type B host port for USB/KVM, and analog L/R audio embedding and breakout via 3-pin Phoenix connectors.
Will this work on an unmanaged switch or do I need a managed network?
A: It supports unicast transmission over unmanaged networks and multicast for large managed networks, so it can work on an unmanaged switch with unicast mode.
Can I cascade multiple displays from the transmitter?
A: Yes; the unit includes an HDMI loop-out specifically for integrating local displays or cascading to multiple devices.
What video resolutions and latency should I expect?
A: The transmitter supports up to 1080p at 60Hz and typical latency is three frames (listed as <120ms subject to compression, frame rate and scaling).
Can the IP50HD-TX embed and break out analog audio?
A: Yes; it supports PCM 2.0 channel audio and provides analog L/R audio embedding and audio breakout.
