This Blustream IP50HD-RX Contractor Series HD Video Receiver over 100Mbps Network, Built-in Video Scaler, Bi-directional IR, RS-232 & USB/KVM, PoE and Analogue Audio Breakout.
Our Contractor Series HD distribution platform allows distribution of AV and control signals over a 100Mbps network.
The IP50HD-RX is an industry leading 1080p HDMI video scaling receiver that uses H.265 compression technology to deliver HDMI, Bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture.
The receiver can be powered via PoE from the network switch or locally should the switch not support PoE. With multiple configuration options available the Multicast HD solution is ideal for both commercial and residential installations.
Blustream IP50HD-RX Contractor Series HD Video Receiver over 100Mbps Network Features:
- Advanced HD video, control and KVM over network infrastructure
- Extends HDMI up to a distance of 100m over a single CAT cable
- Supports unicast transmission over unmanaged networks
- Supports multicast transmission for large managed networks
- In-built video scaler to allow for inclusion of displays with differing resolution capabilities (1080p max)
- Supports up to 1080p 60Hz video output
- Supports PCM 2.0 channel audio only
- Advanced signal management for independent routing of IR, RS-232, USB/KVM, and video/audio
- PoE (Power over Ethernet) to power Blustream products from PoE switch
- HDCP1.4 compliant with advanced EDID management
- Analogue L/R audio breakout
- Local 12V 1A power supply should Ethernet switch not support PoE (not included)
- Features 2 operational modes:
- Matrix distribution (requires 100Mbps network switch)
- One-to-one HDMI extender (no network switch required)
Blustream IP50HD-RX Contractor Series HD Video Receiver over 100Mbps Network Specifications:
- Video Input Connectors: 1 x LAN RJ45 connector,
- Video Output Connectors: 1 x HDMI Type A, 19-pin, female, locking
- Latency: 3 frames (<120ms subject to video compression, frame rate and scaling)
- Audio Output Connectors: 1 x 3-pin Phoenix connector
- Ethernet port: 1x LAN RJ45 connector (video extension)
- RS-232 serial port: 1 x 3-pin Phoenix connector
- USB/KVM Device Ports: 2 x USB-Type A
- IR Input ports: 1 x 3.5mm stereo jack
- IR Output ports: 1 x 3.5mm mono jack
- PoE draw: 2.9W (typical), 3.2W (max load)
- Mounting kit included
- Dimensions (W x D x H): 190mm x 95mm x 25mm
- Dimensions Including Connections (W x D x H): 190mm x 100mm x 25mm, without feet
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature: -4°F to 140°F (-20°C to 60°C)
Box Contents
- 1 x IP50HD-RX
- 1 x IR Receiver
- 1 x IR Emitter
- 1 x Mounting Kit
- 4 x Rubber Fee
Blustream IP50HD-RX Contractor Series HD Video Receiver over 100Mbps Network Manual
Blustream IP50HD-RX Contractor Series HD Video Receiver over 100Mbps Network DataSheet
Why not buy this Blustream IP50HD-RX Contractor Series HD Video Receiver over 100Mbps Network today?
What video resolutions and refresh rates does the IP50HD-RX support?
A: It supports up to 1080p at 60Hz output (1080p max).
How far can HDMI be extended with this receiver over a network cable?
A: You can extend HDMI up to 100 meters over a single CAT cable.
Does the IP50HD-RX support audio formats beyond stereo PCM?
A: No — the unit supports PCM 2.0 channel audio only.
What connectors and control ports are available on the receiver?
A: It provides 1 HDMI output, LAN RJ45, RS-232 (3-pin Phoenix), analogue L/R audio (3-pin Phoenix), 2 USB-A device ports, and IR input/output jacks.
What power options are supported for the IP50HD-RX?
A: It can be powered via PoE from a switch or locally with a 12V 1A power supply if the switch doesn't support PoE.
Will this work for sending HDMI to many displays across a building?
A: Yes — for large managed networks it supports multicast transmission when you use a suitable network switch.
Can I route IR, RS-232, USB/KVM separately from the video?
A: Yes — the product provides independent routing of IR, RS-232, USB/KVM, and video/audio.
What latency should I expect when using this receiver over the network?
A: Latency is about three frames (under 120ms), depending on compression, frame rate, and scaling.
What comes in the box with the IP50HD-RX?
A: The box includes the IP50HD-RX, an IR receiver, an IR emitter, a mounting kit, and four rubber feet.
