This Blustream IP200UHD-RX HDMI over IP Receiver 4k with POE HDCP & 2.2 allows virtually latency free (1 frame) distribution of HDMI video over a 1Gb Network switch.
The IP200UHD-RX is an industry leading 4K HDCP 2.2 HDMI video scaling receiver that uses visually lossless compression technology to deliver HDMI, Bi-directional IR, RS-232 & USB / KVM up to lengths of 100m over standard network architecture.
The IP200UHD-RX can be powered via PoE from the Network switch or locally should the switch not support PoE. With multiple configuration options available the Multicast solution is ideal for both commercial and residential installations.
Blustream IP200UHD-RX HDMI over IP Receiver 4k with POE HDCP & 2.2 Features:
- Advanced UHD video over 1Gb Network
- Virtually unlimited system size
- Extends HDMI up to a distance of 100m over a single CAT cable
- Video up-scaling and downscaling
- Supports up to 4K @ 30Hz UHD video output
- Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
- Advanced signal management for independent routing of IR, RS-232, USB / KVM, audio and video
- PoE (Power over Ethernet) to power Blustream products from PoE switch
- HDCP 2.2 compliant with advanced EDID management
- Analog L/R audio breakout
- LAN loop-out for one-to-many extender mode
- Local 24-56V power supply (should Ethernet switch not support PoE) - sold separately
- Features 4 operational modes:
- Matrix distribution (requires 1Gb network switch)
- Video wall (requires 1Gb network switch)
- One-to-one HDMI extender (No network switch required)
- One-to-many HDMI extender (No network switch required)
Why not buy this Blustream IP200UHD-RX HDMI over IP Receiver 4k with POE HDCP & 2.2 today?
Blustream IP200UHD-RX HDMI over IP Receiver 4k with POE HDCP & 2.2 Specifications:
- Video Input Connectors: 1 x LAN RJ45 connector,
- Video Output Connectors: 1 x HDMI Type A, female
- Audio Output Connectors: 2 x RCA L/R Analog audio
- Ethernet Port: 1 x LAN RJ45 connector (video extension)
- RS-232 Serial Port: 1 x 3-Pin Phoenix connector
- USB / KVM Port: 2 x USB - Type A
- IR Input Ports: 1 x 3.5mm stereo jack
- IR Output Ports: 1 x 3.5mm mono jack
- Firmware Update (MCU): 1 x Micro-USB
- Mounting Kit included
- Dimensions (W x D x H ): 190mm x 114mm x 25mm
- Shipping Weight: 0.8kg
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature: -4°F to 140°F (-20°C to 60°C)
Why not buy this Blustream IP200UHD-RX HDMI over IP Receiver 4k with POE HDCP & 2.2 today?
Why not buy this Blustream IP200UHD-RX HDMI over IP Receiver 4k with POE HDCP & 2.2 today?
Does this receiver require a 1Gb network switch for matrix or video wall modes?
A: Yes. The matrix distribution and video wall operational modes require a 1Gb network switch.
Can the IP200UHD-RX be powered over Ethernet (PoE)?
A: Yes. The IP200UHD-RX can be powered via PoE from the network switch.
Is a local power supply included for non-PoE installations?
A: No. A local 24–56V power supply is listed as sold separately.
What video output resolution and refresh does this receiver support?
A: It supports up to 4K at 30 Hz UHD video output.
Is the unit HDCP 2.2 compliant and does it handle EDID?
A: Yes. The receiver is HDCP 2.2 compliant and includes advanced EDID management.
Can I extend HDMI up to 100 meters over a single CAT cable with this receiver?
A: Yes. The product extends HDMI up to a distance of 100m over a single CAT cable.
Will this work as a one-to-one HDMI extender without a network switch?
A: Yes. The unit supports a one-to-one HDMI extender mode that does not require a network switch.
Does the receiver pass multichannel HDMI audio formats like Dolby TrueHD and DTS‑HD?
A: Yes. It supports Dolby TrueHD, Dolby Digital Plus and DTS‑HD Master Audio transmission.
Can I route IR, RS-232, USB/KVM and analog audio independently through this system?
A: Yes. The receiver provides independent routing for IR, RS-232, USB/KVM, audio and video.
What power options should I plan for if my network switch doesn't support PoE?
A: You should plan to provide a local 24–56V power supply because PoE is optional and a local supply is sold separately.
