The Blustream DMP168 is a 16x8 digital audio matrix processor designed for flexible multi-zone audio routing, supporting analog and digital inputs with advanced per-channel processing including volume control, EQ, filtering, lip-sync delay, mono/stereo management, output grouping, and audio ducking for efficient and cost-effective multiroom audio distribution.
Blustream DMP168 16x8 Digital Matrix Processor Features:
- Features 8 x analogue L/R inputs, 4 x digital coaxial inputs, and 4 x digital optical inputs which can be switched to 8 x analogue L/R outputs
- Supports separation (mono) of all audio channels and independent control resulting in switching of up to 32x16 audio feeds
- Supports: volume, balance, high/low shelf, high/low pass filter, and 4 band parametic equalizer control per input and output
- Supports independent gain adjustment for all analogue and digital inputs
- Features 8 x assignable bus inputs allowing mixing of source inputs
- Features output grouping to combine audio outputs for a single group control.
- Combining the output grouping feature with high/low pass filter results in up to 4 x 2.1ch audio outputs
- Features assignable audio ducking with independent level and ramp up/down rate adjustment
- Features 8x configurable presets
- Supports 48kHz 24-bit sampling rate for A/D and D/A conversion
- Digital audio inputs support resolutions up to 192kHz 24-bit
- Supports independent lip-sync delay (0-500ms) per output
- Features input audio sensing, 2 x contact closures and 2 x trigger inputs allowing programmable events based on the presence of audio, NO/NC connections, and/or voltage between 2-15V AC or DC voltage
- Supports control via web-GUI, RS-232, TCP/IP and IR
- 1U design for 19" rack mount integration - rack mounting kit included
Why not buy this Blustream DMP168 16x8 Digital Matrix Processor form HDTV Supply today?
Blustream DMP168 16x8 Digital Matrix Processor Specification
- Audio Input Connectors: 8 x Analogue RCA (Left / Right), 4 x Optical (S/PDIF), 4 x Digital RCA (S/PDIF)
- Audio Output Connectors: 8 x Analogue RCA (Left / Right)
- RS-232 serial port: 1 x 3-Pin Phoenix connector
- TCP/IP Control: 1 x RJ45, female
- Control port: 4 x 2-Pin Phoenix connector
- Rack-Mountable: 1U rack height, rack ears included
- Casing Dimensions (W x D x H): 440mm x 226mm x 44mm
- Dimensions Including Connections & Feet (W x D x H): 440mm x 235mm x 51mm
- Shipping Weight: 4.6kg
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature: -4°F to 140°F (-20°C to 60°C)
- Power Supply: Internal 100-240V AC
Why not buy this Blustream DMP168 16x8 Digital Matrix Processor form HDTV Supply today?
Why not buy this Blustream DMP168 16x8 Digital Matrix Processor form HDTV Supply today?
Does the DMP168 include any accessories in the box?
A: Yes; the package includes the DMP168, an IR receiver, a 19" rack mounting kit, four mounting feet, a quick reference card, and an IEC power cable.
How can I control and configure the DMP168?
A: You can control the DMP168 via its web‑GUI, RS‑232 serial commands (and Telnet), TCP/IP, and IR.
What sampling rates does the DMP168 support?
A: A/D and D/A conversion operate at 48 kHz / 24‑bit, and the digital audio inputs support resolutions up to 192 kHz / 24‑bit.
Does the DMP168 support per‑output delay or lip‑sync adjustment?
A: Yes; it supports independent lip‑sync delay up to 0–500 ms per output.
Can I route one input to multiple outputs with the DMP168?
A: Yes; the Control matrix lets you route any input column to multiple output rows so a single input can feed multiple outputs.
How do I reset the DMP168 to factory defaults?
A: Press and hold the recessed RESET button on the rear panel for at least 10 seconds; the reset process takes about 30 seconds.
Can I rack‑mount the DMP168 in a 19" rack?
A: Yes; the DMP168 is 1U high for 19" rack integration and a rack mounting kit is included.
What power does the DMP168 use and is a power cable included?
A: The unit has an internal 100–240V AC power supply, and the package contents list an IEC power cable included.
How do I access the web‑GUI and what are the default network login details?
A: Connect the unit to your network via the TCP/IP RJ45 port; by default the unit uses DHCP, its default IP is 192.168.0.200, default admin username is blustream and default admin password is @Bls1234, and the default mDNS name is dmp168.local.
