This Blustream DA44AU 4x4 Dante I/O Matrix is a 4 input / 4 output Dante? digital audio converter.
The DA44AU allows any non-Dante? audio source such as mixing consoles, amplifiers, computers and Blustream matrix / distribution products to be connected as an audio source within a Dante? network, as well as converting a Dante? signal back to an analog audio signal.
The DA44AU supports both balanced and unbalanced audio as well as microphone line level inputs inc, 48V phantom power. The DA44AU supports AES67 RTP audio transport.
Blustream DA44AU 4x4 Dante I/O Matrix Features:
- Features 4 x analog audio inputs that are converted to a Dante® compatible signal
- Features conversion of 4x Dante® signals to analog audio outputs
- Analog audio inputs support both balanced and unbalanced audio + MIC line level signals
- MIC line level supports 48V phantom power
- Supports 44.1, 48 & 96kHz sample rates @ 24-bit
- Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)
- Independent input gain settings per channel
- Supports AES67 RTP audio transport
Why not buy this Blustream DA44AU 4x4 Dante I/O Matrix today?
Blustream DA44AU 4x4 Dante I/O Matrix Specifications:
- Audio Input Connectors: 12-pin Phoenix connector (4ch balanced / unbalanced analog audio / MIC)
- Audio Output Connectors: 2 x RJ45, female (1Gb Dante® network), 12-pin Phoenix connector (4ch balanced / unbalanced analog audio / MIC)
- Casing Dimensions (W x H x D): 120mm x 23mm x 34m without feet
- Operating Temperature: 32°F to 104°F (-5°C to +55°C)
- Storage Temperature: -4°F to 140°F (-25°C to +70°C)
- Power Supply: 12V/1A DC
Why not buy this Blustream DA44AU 4x4 Dante I/O Matrix today?
Why not buy this Blustream DA44AU 4x4 Dante I/O Matrix today?
What physical inputs and outputs does the DA44AU provide?
A: The DA44AU provides four analog audio inputs on a 12-pin Phoenix connector and four analog audio outputs plus a 1 Gb Dante network connection on two RJ45 ports.
Does the DA44AU support microphone inputs and phantom power?
A: Yes; the DA44AU supports mic-level inputs and provides 48V phantom power.
What digital audio sample rates and bit depth does it support?
A: It supports 44.1, 48 and 96 kHz sample rates at 24-bit.
What power input does the DA44AU require?
A: The DA44AU requires a 12V/1A DC power supply.
Does the DA44AU support AES67 and Dante device latency configuration?
A: Yes; it supports AES67 RTP audio transport and configurable Dante device latency (1, 2 or 5 ms via Dante Controller).
Can I use the DA44AU to put non‑Dante sources onto a Dante network?
A: Yes; the DA44AU converts four analog inputs into a Dante-compatible signal so non‑Dante sources can be connected to a Dante network.
Can the DA44AU convert Dante channels back to analog outputs for amplifiers or mixers?
A: Yes; it converts up to four Dante inputs back to analog audio outputs on its 12-pin Phoenix connector.
Will the DA44AU work with AES67 streams?
A: Yes; the DA44AU supports AES67 RTP audio transport.
Can I change the Dante latency if I need lower or higher buffering?
A: Yes; Dante device latency on the DA44AU is configurable to 1 ms, 2 ms, or 5 ms using Dante Controller.
What operating temperature range should I keep the DA44AU within?
A: Keep it between 32°F and 104°F (−5°C to +55°C) for normal operation.
