Build Your Own POE AV Over IP Matrix w/Audio Breakout & RS232

WolfPack

Discontinued

Part Number:
av-over-ip-matrix
Availability:
Contact us for availability
1:
Build a POE AV Over IP Matrix
2:
Sends & Receives to ~400'
3:
Supports up to 1080p
4:
Bi-directional IR control
5:
Supports Video Recording
6:
Windows 10 Controlled
7:
RX has Audio Breakout
WolfPack HDMI Switchers HDTV Supplys WolfPack POE AV Over IP Matrix is an IP Streaming Matrix System made up HDMI IP Streaming Encoders and HDMI IP Streaming Decoders designed for long distance HDMI transmission. with IR & RS232 control signals over IP network. It works with one Windows 10 control PC (Wake on LAN) and one 1GbE Switch to control a variety of functions.

Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs, or any combination. You don't have to have any IP or LAN knowledge, just select a few settings and you will be running in a few minutes.

The AV Over IP Matrix features 1080p HDMI video switching, audio de-embedding, audio switching, bi-directional IR & RS232 transmission, video recording, PoE and other functions. The control software named "IP Streaming Management" merges all the functions for user control into IP streaming system.

HDTV Supplys WolfPack™ AV Over IP Matrix allows for the distribution & switching of high definition video & audio signals using off-the-shelf Gigabit IGMP switches. It can also be used as an extender in a point-to-point connection with distances is up to ~400 feet. A typical AV Over IP Matrix over IP includes multiple Encoder units and multiple Decoder units. You can create here any-size HDMI matrix switch using our AV Over IP Matrix with only the number of ports available on the Ethernet LAN switch limiting the ins and outs of your design. Multiple Encoders can simultaneously connect to many Decoders to form a virtual matrix of up to multiple HDMI inputs with up to 65,000 HDMI receivers (widescreens).

This AV Over IP Matrix Features:

  • 1080p video over an 1G Switch
  • Supports resolution up to 1920x1080p
  • Supports PoE powered by IP network
  • Supports video recording
  • This encoder features an HDMI loop out
  • Supports audio breakout
  • Plug and play.
  • Transmission distance is up to 120 meters or 400 feet via CAT6.
  • Supports scalable and flexible input and output matrix configurations allowing 100 inputs to an infinite output.
  • Supports select and switch source device input from the receiver via remote control
  • Supports IR pass back function to control the source device from the receiver location.
  • Supports IR pass back function to control the TVs from the Source location
  • Supports computer control software to select and switch source device input

Why not buy a WolfPack AV Over IP Streaming System today?

This WolfPack AV over IP (AVoIP) allows for systems to go beyond the physical limitations of matrix switchers with chassis and front panel buttons both in input/output capacity, flexibility in that all signals do not have to connect at a central location, and distance limitations for the cabling to that central location.

WolfPack AV over IP Streaming Encoder Specification:

  • HDTVIPH400E AV Encoder:
    • Video Input: (1) HDMI In
    • Video Input Connector: (1) Type-A female HDMI
    • HDMI Input Resolution: Up to 1080p@60Hz 8bit
    • Video Output: (1) HDMI Out
    • Video Output Connector: (1) Type-A female HDMI
    • HDMI Output Resolution: Up to 1080p@60Hz 8bit
    • Control: (1) RS232, (1) IR In, (1) IR Out, (1) LAN (PoE)
    • Control Connector: (1) 3-pin terminal block, (2) 3.5mm jack, (1) RJ45
  • General
    • External Power Supply: Input: AC 100~240V, 50/60Hz, Output: 12V DC 1A; PoE supported.
    • Power Consumption: Encoder:4W (Max); Decoder: 3.5W (Max)
    • Operation Temperature: -5˚C ~ +55˚C
    • Storage Temperature: -25˚C ~ +70˚C
    • Relative Humility: 10%-90%
    • Dimension (W*H*D): 152.0mm x 21.0mm x 100.0mm
    • Net Weight: Encoder: 340; Decoder: 345g

WolfPack AV over IP Streaming Decoder Specification:

  • HDTVIPH400D AV Decoder:
    • Video Output: (1) HDMI Out
    • Video Output Connector: (1) Type-A female HDMI
    • HDMI Output Resolution: Up to 1080p@60Hz 8bit
    • Audio Output: (1) Audio Out (L+R)
    • Audio Output Connector: (1) RCA jack
    • Control: (1) Storage, (1) RS232, (1) IR In, (1) IR Out, (1) LAN (PoE)
    • Control Connector: (1) Type-A USB, (1) 3-pin terminal block, (2) 3.5mm jack, (1) RJ45
  • General
    • External Power Supply: Input: AC 100~240V, 50/60Hz, Output: 12V DC 1A; PoE supported.
    • Power Consumption: Encoder:4W (Max); Decoder:3.5W (Max)
    • Operation Temperature: -5˚C ~ +55˚C
    • Storage Temperature: -25˚C ~ +70˚C
    • Relative Humility: 10%-90%
    • Dimension (W*H*D): 152.0mm x 21.0mm x 100.0mm
    • Net Weight: Encoder: 340; Decoder: 345g

Why not buy a WolfPack AV Over IP Streaming System today?

IP Streaming Encoder and Decoder User Manual

Why not buy a WolfPack AV Over IP Streaming System today?