This Atlona AT-OME-EX-WP-KIT Omega HDBaseT TX w/USB Wall Plate and Receiver Kit is a wall-plate HDBaseT extender kit designed for modern AV installations.
It delivers HDMI video (up to 4K @ 60Hz with 4:2:0 chroma subsampling) plus embedded audio, USB 2.0, and control signals (RS-232) over a single category cable up to 330 ft (100 m).
The transmitter fits into a US one-gang wallplate form-factor, with interchangeable black and white trims for discreet installation, while the receiver remotely powers the transmitter via HDBaseT, eliminating the need for local AC at the wall.
It’s HDCP 2.2 compliant and built for integration in conference rooms, classrooms and interactive-display setups where USB peripherals, video sources and displays must be linked across distance.
Atlona AT-OME-EX-WP-KIT Omega HDBaseT TX w/USB Wall Plate and Receiver Kit Feature:
- HDBaseTTM extender kit for HDMI® video, power, control, and USB
- USB 2.0 interfacing and extension up to 330 feet (100 meters)
- US one-gang enclosure for wallplate openings – interchangeable black or white trim kits
- 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
- HDCP 2.2 compliant
- Transmitter powered by receiver over HDBaseT
- Also available: AT-OME-EX-WP-KIT-LT (70 meter extension)
Why not buy this Atlona AT-OME-EX-WP-KIT Omega HDBaseT TX w/USB Wall Plate and Receiver Kit from HDTV Supply today?
Atlona AT-OME-EX-WP-KIT Omega HDBaseT TX w/USB Wall Plate and Receiver Kit Specifications:
- Video
- HDMI Specification: HDMI 2.0, HDCP 2.2
- TMDS Clock: 300 MHz
- UHD/HD
- 4096×2160 (DCI) @60(1)/30/24 Hz
- 3840×2160 (UHD) @60(1)/50/24/25/30 Hz
- 1080p @23.98/24/25/29.97/30/50/59.94/60 Hz
- 1080i @25/29.97/30 Hz
- 720p @30/50/59.94/60 Hz
- VESA
- 2560×2048
- 2560×1600
- 2048×1536
- 1920×1200
- 1680×1050
- 1600×1200
- 1600×900
- 1440×900
- 1400×1050
- 1366×768
- 1360×768
- 1280×1024
- 1280×800
- 1280×768
- 1152×768
- 1024×768
- 800×600
- 640×480
- VESA 21:9
- 2560×1080 @ 30 Hz 4:4:4
- 2560×1080 @ 60 Hz 4:4:4
- 3440×1440 @ 30 Hz 4:4:4
- 3440×1440 @ 50 Hz 4:4:4
- 3840×1600 @ 30 Hz 4:4:4
- Color Space: YUV, RGB
- Chroma Subsampling: 4:4:4, 4:2:2, 4:2:0
- Color Depth: 8-bit, 10-bit, 12-bit
- Audio
- Pass-through
- PCM 2Ch
- LPCM 5.1
- LPCM 7.1
- Dolby® Digital
- DTS 5.1
- Dolby Digital Plus
- Dolby TrueHD
- Dolby Atmos®
- DTS®
- DTS-HD Master Audio™
- DTS:X
- Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
- Bit Depth: Up to 24-bit
- Pass-through
- USB
- Signal: 2.0
- Maximum Data Rate: 120 Mbps
- Control
- CEC: Pass-through
- RS-232: Pass-through from control system to sink device; supports baud rates from 2400 to 115200
- Connectors
- HDMI IN: 1 – Type A, 19-pin female
- HDBaseT OUT: 1 – RJ45
- HOST: 1 – USB Type-B
- DEVICE: 1 – USB Type-A
- RS-232: 1 – captive screw, 3-pin
- Indicators and Controls
- PWR LED indicator: 1 – LED, green
- LINK LED indicator: 1 – LED, yellow
- Resolution / Distance (Feet)
- HDMI IN/OUT
- 15 (4K UHD)
- 30 (1080P)
- CAT5e
- 295 (4K UHD)
- 330 (1080P)
- CAT6/6a/7
- 330 (4K UHD)
- 330 (1080P)
- HDMI IN/OUT
- Power
- Consumption: 11.18 W (includes 2.5 W for USB, powered by RX)
- USB Power: 2.5 W per USB device interface
- Environmental
- Operating Temperature: 0° to 122°F / 0° to 50°C
- Storage Temperature: -4° to +140°F / -20° to +60°C
- Operating Humidity (RH): +20 to +90%, non-condensing
- AT-OME-EX-TX-WP Dimensions (H x W x D) (Inches)
- Unit: 4.07 x 1.80 x 2.63
- Chassis
- Weight: 0.40 lb (180 g)
- Safety: CE, RoHS, FCC
Why not buy this Atlona AT-OME-EX-WP-KIT Omega HDBaseT TX w/USB Wall Plate and Receiver Kit from HDTV Supply today?
Atlona AT-OME-EX-WP-KIT User Manual
Atlona AT-OME-EX-WP-KIT Datasheet
