AMX NMX-ENC-N3132-C H.264 Video Over IP Encoder Card
The NMX-ENC-N3132-C is an H.264 encoder card designed for streaming high quality HD video over low bandwidth WAN connections. It is an ideal solution for distance education, IPTV streaming, and multi-site enterprise applications. This card must be used in conjunction with the NMX-ACC-N9206 Rack Mount Cage.
This device uses an H.264 compression engine to deliver low latency 1080p60 video at half the bandwidth of comparable encoders. It supports multiple selectable streaming protocols like RTP and RTSP for compatibility with software endpoints and third party hardware like Roku or Google TV. Adjustable bit rates from 32-Kbps to 10-Mbps ensure high video fidelity at low bandwidths.
The NMX-ENC-N3132-C includes Power over Ethernet to simplify installation by removing the need for local power. It features HDMI and VGA inputs, a pass-through HDMI output, and a USB port for recording. Control options include IR, serial, and built-in onboard control capabilities that can trigger commands to other IP devices.
- Power Over Ethernet (PoE) , Eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations
- Infrared (IR) , Infrared emitter connection allows control of low-cost, IR-only display devices
- Onboard Control , All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
- Unlimited Scalability
- Pass-Through HDMI , HDMI interface allows easy installation with local display such as desktop PC applications
- Card Format - Requires the NMX-ACC-N9206 Rack Mount Cage.
- Ships with the latest firmware. We check the official manufacturer firmware before this item leaves our warehouse.
- 3-year manufacturer warranty. AMX's published USA limited warranty covers AMX finished products for 3 years from the date of purchase. Keep your dated receipt, and see the published warranty policy for full terms.
- Free USA Insured Shipping. This item ships free to US addresses with insured UPS Ground. Paid 2-day, 3-day, and overnight upgrades are available at checkout. International orders are charged shipping.
Call 833-WOLFPACK (833-965-3722) if you have questions.
Why not buy this AMX NMX-ENC-N3132-C H.264 Video Over IP Encoder Card from HDTV Supply today?
AMX NMX-ENC-N3132-C H.264 Video Over IP Encoder Card Specifications
- Video: Digital Video Input: HDMI, DVI-D, Dual-Mode DisplayPort (DP++), RGB/VGA DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter Analog Video Input HD-15 VGA, Component Component is supported through a passive adapter Video Output Network video over Ethernet via RJ45 port or fiber via 1G SFP port, HDMI, DVI-D DVI-D is supported through a passive adapter Formats: HDMI, DVI-D (through adapter), HDCP content protection support, RGBHV, YPbPr Progressive Input Resolutions Supports most common HD up to 1080p60. *720x480 @ 59Hz, 640x480 @ 60Hz, *720x480 @ 60Hz, *720x576 @ 50Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, *1280x720 @ 50Hz, *1280x720 @ 59Hz, *1280x720 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1440x900 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz, *1920x1080 @ 50Hz, *1920x1080 @ 59Hz, *1920x1080 @ 60Hz, *1920x1080i @ 50Hz, *1920x1080i @ 59Hz, *1920x1080i @ 60Hz Interlaced Input Resolutions Supports 1080i60. *720x480 @ 59Hz, 640x480 @ 60Hz, *720x480 @ 60Hz, *720x576 @ 50Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, *1280x720 @ 50Hz, *1280x720 @ 59Hz, *1280x720 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1440x900 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz, *1920x1080 @ 50Hz, *1920x1080 @ 59Hz, *1920x1080 @ 60Hz, *1920x1080i @ 50Hz, *1920x1080i @ 59Hz, *1920x1080i @ 60Hz Analog Input Resolutions ; Input resolutions supported @60Hz refresh rates are also supported @59.94Hz Supports most common HD up to 1080p60. *720x480 @ 59Hz, 640x480 @ 60Hz, *720x480 @ 60Hz, *720x576 @ 50Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, *1280x720 @ 50Hz, *1280x720 @ 59Hz, *1280x720 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1440x900 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz, *1920x1080 @ 50Hz, *1920x1080 @ 59Hz, *1920x1080 @ 60Hz, *1920x1080i @ 50Hz, *1920x1080i @ 59Hz, *1920x1080i @ 60Hz Output Resolutions: Matched to inputs Analog-To-Digital Conversion: 8-bit 165 MHz per each of three color channels ; The N3132 Encoder does not accept Composite or SVideo (YC) *supported in component mode
- Audio: Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced) Output Signal Types: Ethernet, Embedded audio on HDMI or DVI-D (through adapter) HDMI output refers to pass-through video on the HDMI OUT port HDMI Audio Formats: Stereo 2-channel Analog Audio Formats: Stereo 2-channel Analog-To-Digital Conversion: 16-bit 32 kHz, 44.1 kHz and 48 kHz NOTE: HDMI output refers to pass-through video on the HDMI OUT port.
- Latency: Latency: 175 ms at 60 fps Note: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency. Note: Scaling adds one frame of latency (17ms at 60fps)
- Communications: Ethernet P0 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP P1 1 Gbps port which accepts compatible fiber transceivers or direct attach cables (fiber or copper cabling) HDMI: HDCP, EDID management
- Ports: +12V 2A: One 12 Volt DC power input. P0 8-wire RJ45 female 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port Provides the network connection, network AV video, and power to the Encoders and Decoders P1 SFP port (SFP fiber transceiver or direct attach cable not included) Provides the network connection and network AV video IR 2-pin terminal Phoenix connector Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included) RS232 3-pin terminal Phoenix connector Provides a serial control interface. Full duplex communication. Available terminal speed settings: 9600-115200 baud rate AUDIO 5-pin terminal Phoenix connector Provides user-selectable balanced/unbalanced input. Dedicated audio input HDMI OUT: HDMI video output (passive pass-through from HDMI IN) HDMI IN: HDMI video input VGA IN: DB15 analog input USB connector (front panel): One USB-A control input
- Controls and Indicators - Front Panel: RESET Button Recessed pushbutton Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings ID Button Recessed pushbutton Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command) POWER LED On solid (green) when operating power is supplied (via PoE or local power supply) This activity is also shown by the PWR LED on the rear panel STATUS LED On flashing (green) when there is software activity This activity is also shown by the STAT LED on the rear panel
- Controls and Indicators - Rear Panel: PWR LED: Same as POWER LED described above HDMI LED: On (green) when there is a connection to a valid video source STAT LED: Same as STATUS LED described above STRM LED: On (green) when the unit is streaming video
- Environmental: Temperature: 32° to 104°F (0° to 40°C) Humidity: 10% to 90% RH (non-condensing) Heat Dissipation: Up to ~44 BTU/Hr
- General: Regulatory Compliance: FCC, CE, and NTRL Recommended Accessories: NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
- Model: NMX-ENC-N3132-C
- Part number: FGN3132-CD
- UPC: 718878024430
- Shipping weight: 1.55 lbs (manufacturer data)
- Warranty: 3-year manufacturer warranty
Specifications above are from official AMX product pages and documents. Call 833-WOLFPACK (833-965-3722) if you have questions.
Why not buy this AMX NMX-ENC-N3132-C H.264 Video Over IP Encoder Card from HDTV Supply today?
AMX NMX-ENC-N3132-C H.264 Video Over IP Encoder Card Manuals
- NMX-ENC-N3132-C Instruction Manual - SVSI N3000 Series Encoders/Decoders WAN H.264 Video Over IP
- NMX-ENC-N3132-C NetLinx Control for N-Series Products Documentation Addendum
- NMX-ENC-N3132-C NMX-ENC-N3132, H.264 Compressed Video over IP Encoder
- NMX-ENC-N3132-C SVSI Networked AV - Pre-Implementation Guide
The documents above are official AMX files that we host for your convenience.
Need a copy now? Call 833-WOLFPACK (833-965-3722) and we will email the official manual to you.
Why not buy this AMX NMX-ENC-N3132-C H.264 Video Over IP Encoder Card from HDTV Supply today?
AMX NMX-ENC-N3132-C H.264 Video Over IP Encoder Card Q&A
What is the maximum video resolution supported by the NMX-ENC-N3132-C?
What is the maximum video resolution supported by the NMX-ENC-N3132-C?
The NMX-ENC-N3132-C supports most common HD resolutions up to 1080p60. This includes progressive and interlaced formats like 1920x1080p at 60Hz and 1920x1080i at 60Hz.
What is the combined encode and decode latency?
What is the combined encode and decode latency?
The combined encode and decode latency is 175 ms at 60 fps. If scaling is used, it adds one frame of latency, which is approximately 17ms at 60fps.
What network connections are available on the NMX-ENC-N3132-C?
What network connections are available on the NMX-ENC-N3132-C?
It has one RJ45 10/100/1000 Mbps port and one 1 Gbps SFP port. The SFP port can be used with fiber transceivers or direct attach cables, though the SFP module is not included.
Does the NMX-ENC-N3132-C support Power over Ethernet?
Does the NMX-ENC-N3132-C support Power over Ethernet?
Yes, the NMX-ENC-N3132-C supports Power over Ethernet (PoE). It can also be powered locally using a 12VDC input for high density rack installations.
What audio formats does the NMX-ENC-N3132-C handle?
What audio formats does the NMX-ENC-N3132-C handle?
It supports 2-channel stereo audio. This includes embedded audio on HDMI or analog stereo via a 5-pin balanced or unbalanced terminal connector.
What are the bit rate options for streaming?
What are the bit rate options for streaming?
The NMX-ENC-N3132-C offers adjustable bit rates ranging from 32-Kbps to 10-Mbps. This allows for high video quality even at the lowest bandwidths on the market.
What control ports are included on the NMX-ENC-N3132-C?
What control ports are included on the NMX-ENC-N3132-C?
The card includes a 2-pin IR terminal for infrared control and a 3-pin RS232 terminal for serial communication. It also features a front panel USB-A control input.
Can the NMX-ENC-N3132-C be used as a standalone device?
Can the NMX-ENC-N3132-C be used as a standalone device?
No, this specific model is an encoder card. It must be used in conjunction with the NMX-ACC-N9206 Rack Mount Cage which provides power for up to six card units.
What warranty comes with the NMX-ENC-N3132-C?
What warranty comes with the NMX-ENC-N3132-C?
AMX's published USA limited warranty covers AMX finished products for 3 years from the date of purchase. Keep your dated receipt, and see the published warranty policy for full terms. Call 833-WOLFPACK (833-965-3722) if you have questions.
Does the NMX-ENC-N3132-C include free shipping?
Does the NMX-ENC-N3132-C include free shipping?
Yes. This item ships free to US addresses with insured UPS Ground. Paid 2-day, 3-day, and overnight upgrades are available at checkout. International orders are charged shipping.
Where can I buy the NMX-ENC-N3132-C?
Where can I buy the NMX-ENC-N3132-C?
You can buy the NMX-ENC-N3132-C from HDTV Supply at hdtvsupply.com. Call 833-WOLFPACK (833-965-3722) if you have questions.
How do I get help choosing the NMX-ENC-N3132-C or a related AMX product?
How do I get help choosing the NMX-ENC-N3132-C or a related AMX product?
We offer free system design help. Call 833-WOLFPACK (833-965-3722) or use Chat With an AV Expert on hdtvsupply.com and we will help you match the job before you buy.
Will the NMX-ENC-N3132-C work with my other N-Series units?
Will the NMX-ENC-N3132-C work with my other N-Series units?
Compatibility depends on the devices and streams used. Tell us which N-Series units you have or plan, and we will help you match them. Call 833-WOLFPACK (833-965-3722) if you have questions.
