AMX NMX-ENC-N2312-C 4K UHD Video Over IP Card Encoder

AMX

$1,391.00
Part Number:
AMX-NMX-ENC-N2312-C
UPC:
718878024423
1:
Design Flexibility , Start as small as 1x1 and grow the system in increments of
2:
Advanced Security including SSL/TLS and HTTPS , Satisfies enterprise network sec
3:
Infrared (IR) , Emitter connection allows control of IR-only display devices
4:
Fast Install , With Phoenix connectors for Power, IR, RS232 serial, and analog a
5:
Free USA Insured Shipping
6:
3-year manufacturer warranty
7:
Ships with the latest firmware

AMX NMX-ENC-N2312-C 4K UHD Video Over IP Card Encoder

The NMX-ENC-N2312-C is a flexible 4K UHD video over IP encoder card designed for digital media distribution. It uses a motion-based wavelet codec to deliver video with nearly imperceptible latency over standard gigabit Ethernet networks. This solution is ideal for 4K applications requiring high quality video at a low 200 Mb/s bandwidth.

This encoder card supports resolutions up to 4096x2160 and includes HDCP 2.2 content protection. It features input scaling, bi-directional serial, IR, and KVM over IP extension for comprehensive control. Users can easily route any source to multiple displays through standard layer 2 or layer 3 switches using Cat5e cable.

The NMX-ENC-N2312-C is a card based version specifically designed for high density installations. It must be used in conjunction with the NMX-ACC-N9206 Rack Mount Cage. The card includes both RJ45 and SFP network ports to provide versatile connectivity options.

  • Design Flexibility , Start as small as 1x1 and grow the system in increments of single sources and devices by simply adding additional encoders and decoders
  • Advanced Security including SSL/TLS and HTTPS , Satisfies enterprise network security requirements.
  • Infrared (IR) , Emitter connection allows control of IR-only display devices
  • Fast Install , With Phoenix connectors for Power, IR, RS232 serial, and analog audio interfaces
  • Balanced and Unbalanced Audio , Embedded 7.1 digital audio or balanced/unbalanced analog audio
  • Pass Through HDMI , allows easy installation with local display such as desktop PC applications
  • Multiple Connection Options , RJ-45 and SFP network connectors and HDMI video connections
  • KVM , Single USB-B for KVM applications
  • Native NetLinx , NetLinx Studio will easily recognize the device
  • Ships with the latest firmware. We check the official manufacturer firmware before this item leaves our warehouse.
  • 3-year manufacturer warranty. AMX's published USA limited warranty covers AMX finished products for 3 years from the date of purchase. Keep your dated receipt, and see the published warranty policy for full terms.
  • Free USA Insured Shipping. This item ships free to US addresses with insured UPS Ground. Paid 2-day, 3-day, and overnight upgrades are available at checkout. International orders are charged shipping.

Call 833-WOLFPACK (833-965-3722) if you have questions.

Why not buy this AMX NMX-ENC-N2312-C 4K UHD Video Over IP Card Encoder from HDTV Supply today?

AMX NMX-ENC-N2312-C 4K UHD Video Over IP Card Encoder Specifications

  • Video: Digital Video Input HDMI 2.0, DVI-D* (through adapter), Dual-Mode DisplayPort (DP++)* *These signal types are supported through a passive adapter Analog Video Input: HD-15 VGA Video Output Network video over Ethernet via RJ45 port or SFP via 1G SFP+ port, HDMI, DVI-D* *These signal types are supported through a passive adapter Formats HDMI 2.0, DVI-D (through adapter), Dual-Mode DisplayPort (DP++), HDCP 2.2 content protection support, RGBHV DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter Progressive Input Resolutions Supports 4K30 4:2:0 and most common HD resolutions up to 1920x1200 See NMX-ENC-N2312 Installation Manual for all supported resolutions HDMI and DVI (Progressive) Pixel clock between 27 MHz - 300MHz Minimum resolution of 720x480p60 Maximum horizontal resolution of 4096 or a vertical resolution of 2160* Common acceptable resolutions include: ; 720x480p60 - 480p, 720x576@50, 800x600p60, 1024x768p60, 1280x720@60Hz - 720p60, 1600x1200@60Hz, 1920x1080@60Hz - 1080p60, 3840x2160(4:2:0)@30Hz - UHD30 aka 4K30, 4096x2160(4:2:0)@30Hz - DCI 4K30 Interlaced Input Resolutions Supports 1080i60 See NMX-ENC-N2312 Installation Manual for all supported resoltuions HDMI and DVI (Interlaced) 1920x1080@50Hz - 1080i50 1920x1080@60Hz - 1080i60 Note: Interlaced resolutions will be de-interlaced if scaled on the decoder; otherwise, the interlaced signal will pass through to the display Analog Input Resolutions Supports most common HD resolutions up to 1920x1200 See NMX-ENC-N2312 Installation Manual for all supported resoltuions VGA Pixel clock between 27 MHz - 165 MHz Minimum resolution of 640x480 Maximum horizontal resolution of 1920 or a vertical resolution of 1200 Common acceptable resolutions include: ; 640x480p60, 720x480p60 - 480p, 720x576@50,800x600p60, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz (reduced blanking) Note: Input resolutions supported @60Hz refresh rates are also supported @59.94Hz The N2312 Encoder does not accept Composite or SVideo (YC) Analog-To-Digital Conversion: 8-bit 165 MHz per each of three color channels Color Space: 4:2:0 4K30, 4:2:2 - HD LocalPlay/HostPlay: 8 playlists HostPlay: 1 image/list Note: Jumbo Frames Required Video Wall Construction: Supported within the NMX-DEC-N2322, the N2300 Series is not compatible with SVSI Windowing Processors at this time Network Video Recording: Not compatible with SVSI NVR at this time
  • Audio: Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced) Output Signal Types: Ethernet, Embedded audio on HDMI or DVI-D (through adapter) HDMI Audio Formats: 8ch PCM Analog Audio Format: Stereo 2-channel Analog-To-Digital Conversion: 48 kHz
  • Keyboard and Mouse: Keyboard & Mouse: Connect the Decoder to the keyboard and mouse, and an N2300 Series Encoder to the PC being controlled
  • Latency: Latency 17-ms at 60 fps for 1920x1080 and lower resolutions 34-ms at 30 fps for 4K30 NOTE: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency. Scaling adds one frame of latency (17ms at 60fps) Switching: Up to 1.5s delay, not seamless
  • Bandwidth: Bandwidth: Approximately 160 Mb/s Note: Minimum bandwidth is 50 Mb/s for resolutions <= 1080p60
  • Communications: Ethernet - PO 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP Ethernet - P1 1 Gbps port which accepts compatible fiber transceivers or direct attach cables, DHCP, Auto IP, and static IP HDMI: HDCP, EDID management
  • Ports: +12V 2A: One 12 Volt DC power input PO 8-wire RJ45 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port Provides network connection, network AV video, and power to the Encoders and Decoders PoE power P1 1-Gbps SFP+ port Provides network connection and networked AV video IR IN (front panel): 3-pin terminal Phoenix connector. Provides Infrared (IR) input only and passes signal back to connected decoder (33-60 kHz; typically 39 kHz) IR receiver is necessary (not included) IR OUT 2-pin terminal Phoenix connector Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter is necessary (not included) RS232 3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate AUDIO 5-pin terminal Phoenix connector which provides userselectable balanced/unbalanced input Dedicated audio input HDMI OUT: HDMI video output (passive pass-through from HDMI IN) HDMI IN: HDMI video input VGA IN: DB15 analog input
  • Controls and Indicators - Front Panel: RESET Button Recessed pushbutton Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings ID Button Recessed pushbutton Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command) POWER LED On solid (green) when operating power is supplied (via PoE or local power supply) This activity is also shown by the PWR LED on the rear panel STATUS LED On flashing (green) when there is software activity This activity is also shown by the STAT LED on the rear panel
  • Controls and Indicators - Rear Panel: PWR LED: Same as POWER LED described above HDMI LED: On (green) when there is a connection to a valid HDMI source but will not light for VGA source STAT LED: Same as STATUS LED described above STRM LED: On (green) when the unit is streaming video FAN: None
  • Environmental: Temperature: 32° to 104°F (0° to 40°C) Humidity: 10% to 90% RH (non-condensing) Heat Dissipation: Up to ~44 BTU/hr
  • General: Mounting Options Regulatory Compliance: FCC, CE, and NTRL Recommended Accessories NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
  • Model: NMX-ENC-N2312-C
  • Part number: FGN2312-CD
  • UPC: 718878024423
  • Shipping weight: 1.55 lbs (manufacturer data)
  • Warranty: 3-year manufacturer warranty

Specifications above are from official AMX product pages and documents. Call 833-WOLFPACK (833-965-3722) if you have questions.

Why not buy this AMX NMX-ENC-N2312-C 4K UHD Video Over IP Card Encoder from HDTV Supply today?

AMX NMX-ENC-N2312-C 4K UHD Video Over IP Card Encoder Manuals

The documents above are official AMX files that we host for your convenience.

Need a copy now? Call 833-WOLFPACK (833-965-3722) and we will email the official manual to you.

Why not buy this AMX NMX-ENC-N2312-C 4K UHD Video Over IP Card Encoder from HDTV Supply today?

AMX NMX-ENC-N2312-C 4K UHD Video Over IP Card Encoder Q&A

What is the maximum resolution supported by the NMX-ENC-N2312-C?

What is the maximum resolution supported by the NMX-ENC-N2312-C?

The NMX-ENC-N2312-C supports resolutions up to 4096x2160 at 30Hz with 4:2:0 color space. It also handles common HD resolutions like 1920x1080p60 and 1920x1200.

What type of network cabling is required for this encoder?

What type of network cabling is required for this encoder?

This device utilizes standard Cat5e cable for routing through layer 2 or layer 3 switches. It features one RJ45 port with PoE and one SFP fiber or RJ45 copper network port cage.

What is the latency for video transmission?

What is the latency for video transmission?

The NMX-ENC-N2312-C provides a combined encode and decode latency of 17ms at 60 fps for 1920x1080. For 4K30 signals, the latency is 34ms at 30 fps.

Does the NMX-ENC-N2312-C support KVM applications?

Does the NMX-ENC-N2312-C support KVM applications?

Yes, it includes a single USB B port for KVM over IP keyboard and mouse operation. This allows a decoder to control a PC connected to the encoder.

How much bandwidth does the NMX-ENC-N2312-C use on the network?

How much bandwidth does the NMX-ENC-N2312-C use on the network?

The bandwidth specification is approximately 160 Mb/s. The minimum bandwidth required for resolutions at or below 1080p60 is 50 Mb/s.

What audio formats are supported by this encoder card?

What audio formats are supported by this encoder card?

The NMX-ENC-N2312-C supports embedded 7.1 digital audio on HDMI. It also provides a 5 pin Phoenix connector for user selectable balanced or unbalanced analog stereo input.

Is a specific housing required for the NMX-ENC-N2312-C?

Is a specific housing required for the NMX-ENC-N2312-C?

Yes, this card version must be used in conjunction with the NMX-ACC-N9206 Rack Mount Cage. This cage provides power and mounting for up to six SVSI N Series card units.

Does the NMX-ENC-N2312-C offer a local video output?

Does the NMX-ENC-N2312-C offer a local video output?

Yes, it features an HDMI OUT port that acts as a passive pass through from the HDMI IN. This allows for easy installation with a local display or desktop PC applications.

What warranty comes with the NMX-ENC-N2312-C?

What warranty comes with the NMX-ENC-N2312-C?

AMX's published USA limited warranty covers AMX finished products for 3 years from the date of purchase. Keep your dated receipt, and see the published warranty policy for full terms. Call 833-WOLFPACK (833-965-3722) if you have questions.

Does the NMX-ENC-N2312-C include free shipping?

Does the NMX-ENC-N2312-C include free shipping?

Yes. This item ships free to US addresses with insured UPS Ground. Paid 2-day, 3-day, and overnight upgrades are available at checkout. International orders are charged shipping.

Where can I buy the NMX-ENC-N2312-C?

Where can I buy the NMX-ENC-N2312-C?

You can buy the NMX-ENC-N2312-C from HDTV Supply at hdtvsupply.com. Call 833-WOLFPACK (833-965-3722) if you have questions.

How do I get help choosing the NMX-ENC-N2312-C or a related AMX product?

How do I get help choosing the NMX-ENC-N2312-C or a related AMX product?

We offer free system design help. Call 833-WOLFPACK (833-965-3722) or use Chat With an AV Expert on hdtvsupply.com and we will help you match the job before you buy.

Will the NMX-ENC-N2312-C work with my other N-Series units?

Will the NMX-ENC-N2312-C work with my other N-Series units?

Compatibility depends on the devices and streams used. Tell us which N-Series units you have or plan, and we will help you match them. Call 833-WOLFPACK (833-965-3722) if you have questions.