The Allen & Heath ZEDi-10FX (AH-ZEDI10FX) is a compact analogue mixer with 4 mic/line inputs, 2 stereo line inputs, and 2 Hi-Z instrument inputs, plus a 4-in / 4-out 24-bit/96kHz USB audio interface, and an onboard FX engine. It is built for musicians, singer-songwriters, podcasters, and small venues.
Allen & Heath's ZED Compact and ZEDi ranges use a preamp design from the same R&D team that works on its touring mixers. The ZEDi-10FX has independent rotary controls for gain, level, and pan on every channel, a PFL switch per channel, and a mix fader for the XLR main outputs.
Allen & Heath ZEDi-10FX Features
- GS preamps with plenty of gain. Each of the 4 mono channels has an XLR mic input and a TRS line input on Allen & Heath GS preamps. Official mic gain runs from 6dB to 60dB with a maximum input of +13dBu, and line gain runs from -14dB to +40dB.
- Two Hi-Z inputs for guitars. Two mono channels accept a high-impedance jack input, so you can plug an electric or acoustic guitar straight in without a separate DI box. That is one less piece of gear to carry and set up.
- 3-band MusiQ EQ and high-pass filters. Mono channels use a 3-band MusiQ EQ voiced by Allen & Heath's analogue team, with a high-pass filter on the mic inputs. Stereo channels have a fixed 2-band EQ for quick tone shaping.
- 48V phantom power and PFL monitoring. Global 48V phantom power runs condenser microphones, with a red LED to show it is on. Every channel has a PFL switch that routes to the headphone output, and an LED shows when PFL is active.
- XLR main outputs with LED metering. The L/R main outputs are on XLR connectors and are set by the mix fader. A stereo eight-segment LED display shows your level, and the 1/4-inch headphone output has its own level control.
- Built-in universal power supply. There is no wall wart. The mixer has an internal power supply that accepts 100 to 240V AC at 50/60Hz through an IEC inlet on the rear, with a mains switch next to the inlet.
- Studio-quality reverbs and delays. The ZEDi-10FX adds onboard digital effects that can be applied independently to each input channel. Allen & Heath describes a new suite of reverbs and delays, including multi-model effects.
- Cubase LE and Cubasis included. Allen & Heath includes Cubase LE recording software and the Cubasis app for iOS, so you can record the 4 USB channels as soon as the ZEDi-10FX is connected.
Where the ZEDi-10FX Fits
Musicians and singer-songwriters: Plug in 4 mics, two guitars through the Hi-Z inputs, and backing tracks on the stereo inputs, then mix to the XLR main outputs.
Small venues and cafes: The compact, lightweight chassis and internal power supply make it easy to set up on a small stage or behind a counter.
Podcasts, streaming, and home recording: Record or stream through the 4-in / 4-out USB interface at 24-bit/96kHz, with Cubase LE and the Cubasis iOS app included by Allen & Heath.
Why not buy this Allen & Heath ZEDi-10FX Mixer today?
Allen & Heath ZEDi-10FX Specifications
- Model: ZEDi-10FX
- Manufacturer part number: AH-ZEDI10FX
- Type: Compact analogue mixer with USB audio interface and FX
- Mono inputs: 4x mic/line, XLR and 1/4-inch TRS, GS preamps
- Stereo inputs: 2x stereo line, 1/4-inch TRS jack
- Hi-Z inputs: 2x switchable high-impedance instrument inputs
- Mic gain: 6dB to 60dB, +13dBu maximum input
- Line gain: -14dB to +40dB, +18dBu maximum input
- EQ: 3-band on mono channels, fixed 2-band on stereo channels, high-pass filter on mic inputs
- Phantom power: Global 48V with LED
- Main outputs: XLR L/R, +18dBu maximum
- Metering: Stereo eight-segment LED
- USB audio interface: 4-in / 4-out, 24-bit/96kHz, class compliant for Mac and iOS, compatible with Windows
- Effects: Onboard digital FX, applied independently to each input channel, plus an FX out jack
- Power: Internal PSU, 100 to 240V AC, 50/60Hz, 12W maximum, IEC C6 inlet
- Operating temperature: 0 to 35 degrees C
- Dimensions (W x D x H): 332.9 x 274.6 x 96.5 mm (13.1 x 10.8 x 3.8 in)
- Weight: 2.3 kg (5.1 lb)
- Packed weight: 3.1 kg (6.8 lb)
- Warranty: 1-year limited manufacturer warranty
- UPC: 6938122243453
What's in the Box
- 1 x Allen & Heath ZEDi-10FX
Allen & Heath has not published a full packing list for the ZEDi-10FX on the official pages cited for this listing. Call 833-WOLFPACK (833-965-3722) if you need the complete accessory list.
Why not buy this Allen & Heath ZEDi-10FX Mixer today?
The ZEDi-10FX user manual will be posted here soon. Need it now? Call 833-WOLFPACK (833-965-3722) and we'll email it to you.
Why not buy this Allen & Heath ZEDi-10FX Mixer today?
Allen & Heath ZEDi-10FX Q&A
Does the ZEDi-10FX have phantom power?
Does the ZEDi-10FX have phantom power?
Yes. The ZEDi-10FX has global 48V phantom power for condenser microphones, switched on and off with a red indicator LED.
Can I plug a guitar straight into the ZEDi-10FX?
Can I plug a guitar straight into the ZEDi-10FX?
Yes. Two of the ZEDi-10FX's mono channels have switchable Hi-Z inputs that accept a guitar pickup directly, so you do not need a DI box.
How many microphones can I connect to the ZEDi-10FX?
How many microphones can I connect to the ZEDi-10FX?
The ZEDi-10FX has 4 XLR mic/line inputs, so you can connect up to 4 microphones at once. It also has 2 stereo line inputs for keyboards, phones, or playback.
Does the ZEDi-10FX need an external power adapter?
Does the ZEDi-10FX need an external power adapter?
No. The ZEDi-10FX has a built-in power supply that accepts 100 to 240V AC through a standard IEC lead, so there is no external wall wart.
What EQ does the ZEDi-10FX have?
What EQ does the ZEDi-10FX have?
The ZEDi-10FX has a 3-band MusiQ EQ on each mono channel and a fixed 2-band EQ on the stereo channels. The mic inputs also have a high-pass filter.
Does the ZEDi-10FX have a headphone output?
Does the ZEDi-10FX have a headphone output?
Yes. The ZEDi-10FX has a 1/4-inch headphone output with its own level control, and each channel has a PFL switch so you can solo it in your headphones.
Does the ZEDi-10FX have built-in effects?
Does the ZEDi-10FX have built-in effects?
Yes. The ZEDi-10FX has onboard digital effects that can be applied independently to each input channel, and it adds an FX output on a 1/4-inch jack.
Does the ZEDi-10FX work as a USB audio interface?
Does the ZEDi-10FX work as a USB audio interface?
Yes. The ZEDi-10FX has a 4-in / 4-out USB audio interface at 24-bit/96kHz. It is class compliant for Mac and iOS devices and is compatible with Windows.
How much does the Allen & Heath ZEDi-10FX weigh?
How much does the Allen & Heath ZEDi-10FX weigh?
The ZEDi-10FX weighs 2.3 kg (5.1 lb) according to Allen & Heath's official specifications. Packed weight is 3.1 kg (6.8 lb).
Is the Allen & Heath ZEDi-10FX good for podcasting and streaming?
Is the Allen & Heath ZEDi-10FX good for podcasting and streaming?
Yes. Allen & Heath positions ZEDi mixers for podcasters, streamers, and musicians. The ZEDi-10FX pairs hands-on analogue control with a USB interface for recording and streaming.
Does the Allen & Heath ZEDi-10FX come with a warranty?
Does the Allen & Heath ZEDi-10FX come with a warranty?
Yes. Allen & Heath lists a 1-year limited manufacturer warranty for the ZEDi-10FX, starting from the original purchase by the end user. Call 833-WOLFPACK (833-965-3722) if you have warranty questions.
Where can I buy the Allen & Heath ZEDi-10FX in the USA?
Where can I buy the Allen & Heath ZEDi-10FX in the USA?
You can buy the Allen & Heath ZEDi-10FX (AH-ZEDI10FX) from HDTV Supply at hdtvsupply.com. Call 833-WOLFPACK (833-965-3722) if you want help choosing the right Allen & Heath model or accessories.
Why not buy this Allen & Heath ZEDi-10FX Mixer today?
HDTV Supply supplies Allen & Heath digital mixers, I/O expanders, and accessories for live sound, houses of worship, schools, and installed AV.
The ZEDi-10FX works with standard XLR microphones, 1/4-inch instrument and line sources, and powered speakers or amplifiers with XLR inputs. Its USB interface is class compliant on Mac and iOS and works with Windows DAWs.
Why not buy this Allen & Heath ZEDi-10FX Mixer today?
This Allen & Heath ZEDi-10FX is covered by Allen & Heath's limited manufacturer warranty against defects in materials and workmanship for one (1) year from the original purchase by the end user, as listed on the official Allen & Heath warranty policy. Questions? Call 833-WOLFPACK (833-965-3722).
