The Allen & Heath DT168 (AH-DT168) is a 16-in, 8-out Dante expander with Allen & Heath preamps and 96kHz converters, in a rugged portable stagebox.
Allen & Heath DT168 Features
- 16 mic preamps on XLR. Sixteen XLR preamps offer +60dB of gain, a -20dB pad for line sources, and individually configured phantom power with an LED per input.
- 8 XLR line outputs. 8 balanced, relay protected XLR line outputs feed speakers, monitors, and recorders at the remote location over the Dante network.
- 48kHz or 96kHz Dante. Run at standard 48kHz or high-fidelity 96kHz on the Dante network, with Allen & Heath preamps and 96kHz converters.
- Primary and secondary ports. Two locking EtherCON ports run in redundant mode for full redundancy with any Dante device, or switched mode to daisy chain units.
- DT Preamp Control software. DT Preamp Control for Windows and macOS remotely controls gain, phantom power, and pad per socket, even without an Allen & Heath mixer.
- Network reset switch. A hardware Network reset switch returns the Dante network settings to a known state during setup or troubleshooting.
- Built for the stage. Rubber bumpers and a sturdy carry handle let the DT168 sit on the stage floor, and an optional rack kit is available.
Where the DT168 Fits
Venues and campuses: Spread Dante I/O across buildings with remote preamp control.
Live and install: Allen & Heath preamps anywhere on the network.
Why not buy this Allen & Heath DT168 Dante Expander today?
Allen & Heath DT168 Specifications
- Model: DT168
- Manufacturer part number: AH-DT168
- Type: Dante remote audio expander (stagebox)
- Inputs: 16x XLR mic/line, phantom LED per input
- Outputs: 8x XLR line, balanced, relay protected
- Sample rate: 48kHz or 96kHz on Dante
- Network: Dante primary and secondary, locking EtherCON; redundant or switched mode
- Power: 100-240V AC, 50/60Hz, 40W max, IEC
- Mounting: Stage floor, horizontal or vertical; optional rack kit
- Operating temperature: 0 to 40 C
- Weight: 4.75 kg (10.45 lb)
- Packed weight: 7.25 kg (16 lb)
- Warranty: 1-year limited manufacturer warranty
- UPC: 6938122249240
What's in the Box
- 1 x Allen & Heath DT168
Allen & Heath has not published a full packing list for the DT168 on the official pages cited for this listing. Call 833-WOLFPACK (833-965-3722) if you need the complete accessory list.
Why not buy this Allen & Heath DT168 Dante Expander today?
The DT168 user manual will be posted here soon. Need it now? Call 833-WOLFPACK (833-965-3722) and we'll email it to you.
Why not buy this Allen & Heath DT168 Dante Expander today?
Allen & Heath DT168 Q&A
Which mixers work with the DT168?
Which mixers work with the DT168?
Allen & Heath says up to 32 units can be added to a Dante equipped AHM, Qu, SQ, Avantis, or dLive system, and the DT168 also works with Dante equipped third party mixers.
Does the DT168 support Dante redundancy?
Does the DT168 support Dante redundancy?
Yes. In redundant mode the DT168 provides full redundant connection to any Dante enabled device.
Can I daisy chain DT168 units?
Can I daisy chain DT168 units?
Yes. In switched mode the DT168 allows daisy chained connection of multiple units.
Does the DT168 run at 96kHz?
Does the DT168 run at 96kHz?
Yes. The DT168 runs at 48kHz or 96kHz on a Dante network.
Can I control the DT168 preamps without an Allen & Heath mixer?
Can I control the DT168 preamps without an Allen & Heath mixer?
Yes. DT Preamp Control for Windows and macOS controls gain, phantom power, and pad per socket.
Does the DT168 have phantom power?
Does the DT168 have phantom power?
Yes. Each input has individually configured phantom power with an LED indicator.
Does the DT168 have a pad?
Does the DT168 have a pad?
Yes. Each preamp has a -20dB pad for line level sources.
How much does the Allen & Heath DT168 weigh?
How much does the Allen & Heath DT168 weigh?
The DT168 weighs 4.75 kg (10.45 lb) according to Allen & Heath's official specifications. Packed weight is 7.25 kg (16 lb).
Is the DT168 good for distributed Dante audio?
Is the DT168 good for distributed Dante audio?
Yes. Allen & Heath highlights the DT168 with DT Preamp Control for large distributed networks in venues, stadia, and campuses.
Does the Allen & Heath DT168 come with a warranty?
Does the Allen & Heath DT168 come with a warranty?
Yes. Allen & Heath lists a 1-year limited manufacturer warranty for the DT168, starting from the original purchase by the end user. Call 833-WOLFPACK (833-965-3722) if you have warranty questions.
Where can I buy the Allen & Heath DT168 in the USA?
Where can I buy the Allen & Heath DT168 in the USA?
You can buy the Allen & Heath DT168 (AH-DT168) from HDTV Supply at hdtvsupply.com. Call 833-WOLFPACK (833-965-3722) if you want help choosing the right Allen & Heath model or accessories.
Why not buy this Allen & Heath DT168 Dante Expander today?
HDTV Supply supplies Allen & Heath digital mixers, I/O expanders, and accessories for live sound, houses of worship, schools, and installed AV.
Allen & Heath says it works with Dante equipped AHM, Qu, SQ, Avantis, and dLive systems with a Dante card or built-in Dante, and with Dante equipped third party mixers.
Why not buy this Allen & Heath DT168 Dante Expander today?
This Allen & Heath DT168 is covered by Allen & Heath's limited manufacturer warranty against defects in materials and workmanship for one (1) year from the original purchase by the end user, as listed on the official Allen & Heath warranty policy. Questions? Call 833-WOLFPACK (833-965-3722).
