The Allen & Heath DM0 (AH-DLIVE-DM0-RUFX) is a dLive S Class MixRack with the RackUltra FX card fitted. It holds the 96kHz XCVI mix engine with 128 input channels and 64 mix outputs, and has no local analogue I/O, built for systems fed entirely by expanders and networking.
Allen & Heath DM0 Features
- XCVI 96kHz core. The XCVI FPGA core runs at 96kHz with a 96 bit accumulator for virtually infinite mix headroom and class leading 0.7ms latency from analogue in to analogue out.
- 128 inputs, 64 mixes. Every dLive MixRack processes 128 input channels and 64 mix outputs, with a configurable 64 bus architecture covering groups, FX, auxes, matrices, and LR, LCR, or 5.1 mains.
- RackUltra FX fitted. The RackUltra FX card is fitted as standard, adding 8 RackUltra FX engines with dedicated stereo sends and returns alongside the 16 RackExtra FX units.
- DEEP processing and Dyn8. DEEP embedded compressor and GEQ models run inside the channels with zero latency, and 64 Dyn8 engines add multiband compression and dynamic EQ.
- Expander based I/O. The DM0 has no local mic/line inputs, so I/O is added with DX expanders and audio networking cards in its I/O ports.
- Redundant connections. Dual redundant GigaACE links to the Surface, 2 redundant DX links, 3 I/O ports of 128 channels at 96kHz, a dedicated ME port, 2 network ports, and wordclock I/O.
- Dual redundant PSU. S Class MixRacks have dual power supply slots for redundancy and are built for touring, broadcast, and permanent installations.
- Surface or surfaceless. Run the MixRack with a dLive Surface, dLive Director software, MixPad, IP controllers, or Custom Control, with or without a control surface.
Where the DM0 Fits
Touring and broadcast: Flagship mixing with redundancy.
Installs: Surfaceless or multi-surface systems.
Why not buy this Allen & Heath dLive DM0 MixRack today?
Allen & Heath DM0 Specifications
- Model: DM0
- Manufacturer part number: AH-DLIVE-DM0-RUFX
- Class: dLive S Class
- Processing: XCVI 160x64 FPGA core, 96kHz, 0.7ms latency
- Channels: 128 inputs, 64 mix outputs, 24 DCAs
- FX: 16 RackExtra FX plus 8 RackUltra FX
- Local I/O: None
- GigaACE: Dual redundant
- DX links: 2x redundant
- I/O ports: 3x, 128ch 96kHz each
- Other: ME port, 2x network, wordclock BNC I/O
- Power: Dual redundant PSU slots
- Rack size: 4U
- Weight: 12.5 kg (27.5 lb)
- Packed weight: 15.3 kg (33.7 lb)
- Warranty: 3-year limited manufacturer warranty
- UPC: 5056756900700
What's in the Box
- 1 x Allen & Heath DM0
Allen & Heath has not published a full packing list for the DM0 on the official pages cited for this listing. Call 833-WOLFPACK (833-965-3722) if you need the complete accessory list.
Why not buy this Allen & Heath dLive DM0 MixRack today?
The DM0 user manual will be posted here soon. Need it now? Call 833-WOLFPACK (833-965-3722) and we'll email it to you.
Why not buy this Allen & Heath dLive DM0 MixRack today?
Allen & Heath DM0 Q&A
How many channels does the DM0 process?
How many channels does the DM0 process?
The DM0 processes 128 input channels and 64 mix outputs.
Does the DM0 include RackUltra FX?
Does the DM0 include RackUltra FX?
Yes. The DM0 is the RackUltra FX version with 8 RackUltra FX engines on top of 16 RackExtra FX.
What is the DM0 latency?
What is the DM0 latency?
Allen & Heath quotes 0.7ms from analogue input to analogue output.
How much local I/O does the DM0 have?
How much local I/O does the DM0 have?
The DM0 has no local mic/line inputs; add I/O with DX expanders and networking cards.
How many I/O ports does the DM0 have?
How many I/O ports does the DM0 have?
Three I/O ports, each carrying 128 channels at 96kHz.
Does the DM0 have redundant power?
Does the DM0 have redundant power?
Yes. The S Class MixRack has dual redundant power supply slots.
Can the DM0 run without a surface?
Can the DM0 run without a surface?
Yes. The MixRack can run standalone, controlled by dLive Director, MixPad, IP controllers, or Custom Control.
How much does the Allen & Heath DM0 weigh?
How much does the Allen & Heath DM0 weigh?
The DM0 weighs 12.5 kg (27.5 lb) according to Allen & Heath's official specifications. Packed weight is 15.3 kg (33.7 lb).
Is the DM0 good for touring?
Is the DM0 good for touring?
Yes. Allen & Heath designs dLive S Class for professional touring, broadcast, and permanent installations, with redundant power and audio connections.
Does the Allen & Heath DM0 come with a warranty?
Does the Allen & Heath DM0 come with a warranty?
Yes. Allen & Heath lists a 3-year limited manufacturer warranty for the DM0, starting from the original purchase by the end user. Call 833-WOLFPACK (833-965-3722) if you have warranty questions.
Where can I buy the Allen & Heath DM0 in the USA?
Where can I buy the Allen & Heath DM0 in the USA?
You can buy the Allen & Heath DM0 (AH-DLIVE-DM0-RUFX) from HDTV Supply at hdtvsupply.com. Call 833-WOLFPACK (833-965-3722) if you want help choosing the right Allen & Heath model or accessories.
Why not buy this Allen & Heath dLive DM0 MixRack today?
HDTV Supply supplies Allen & Heath digital mixers, I/O expanders, and accessories for live sound, houses of worship, schools, and installed AV.
The MixRack works with dLive S Class and C Class Surfaces, dLive Director, DX expanders, and dLive audio networking cards.
Why not buy this Allen & Heath dLive DM0 MixRack today?
This Allen & Heath DM0 is covered by Allen & Heath's limited manufacturer warranty against defects in materials and workmanship for three (3) years from the original purchase by the end user, as listed on the official Allen & Heath warranty policy. Questions? Call 833-WOLFPACK (833-965-3722).
