Call 833-WOLFPACK (833-965-3722)
Customer Reviews
View Cart
Home  //  OUTDOOR TVs  //  Discontinued Products  //  Other Discontinued Products  //  8x8 Component Matrix Switch - OEMs Only

8x8 Component Matrix Switch - OEMs Only

8x8 Component Matrix Switch - OEMs Only
8x8 Component Matrix Switch - OEMs Only

8x8 Component Matrix Switch w/Volume Control Audio

OEM Opportunity for all 145 units at only $450 each

Today's Price: $450.00
Out Of Stock
Ask Our WolfPack Experts


We have the parts in factory to build 145 more of these 8x8 Component Matrix Switches. The customer we built these for had some unexpected issues and cannot complete their planned 8x8 Component Matrix Switch orders. So, you can consider this a close out on the below 8x8 Component Matrix Switch.

You must commit to all 145 units at only $450 each.

8x8 Component Matrix Switch Features:

  • Eight component video inputs and outputs.
  • Video distribution up to 60 meters with RG6 component cabling.
  • Eight audio inputs and outputs (analog and coax digital).
  • Bass, treble and balance control for each zone.
  • Compatible with wide range of controllers.
  • Inputs and Outputs may be憇plit for routing audio and video independently.
  • Simple front display for tracking last input and output selected, even when憇plit.
  • Switchable RS-232 / RS-485 control input and output.
  • Selectable baud rate for any control system compatibility.
  • Eight IR inputs for discrete simple control from each zone via IR repeating systems.
  • Routed IR outputs for simple control over connected sources as well as global IR output.
  • 3U chassis with removable shelf feet. Rack ears are included.
  • Up to three AVC8R controllers can be linked for up to 8 input and 24 output configurations.
  • Video distance will vary on cable used. For greater distances (up to 150 meters), use the above baluns.
  • Analog audio outputs are variable output, coax digital outputs are fixed level.
  • Includes a remote control

Why not buy this 8x8 Component Matrix Switch today


8x8 Component Matrix Switch Specs:

  • Input Sensitivity: 0-2V RMS
  • Input Impedance: 47k Ohms
  • Frequency Response: 20Hz to 20kHz, +/-0.5dB
  • THD+Noise (@1KHz): <0.02%
  • Signal-to-Noise (A Weighted): 95dB
  • Crosstalk (Zone to Zone): >105dB
  • Output Impedance: 600 Ohms
  • Video Gain: Unity
  • Bandwidth (-3dB): 12 MHz
  • Input/output Impedance: 0.75 Ohms
  • Crosstalk: 40dB @ 3.58MHz
  • IR Inputs and Outputs: 36KHz 60KHz, two conductor, tip positive
  • Power Requirements: 230-240VAC 50/60Hz or 120VAC 50/60Hz at 12VDC output -
  • Power Consumption: 25W
  • Dimensions (w/ feet): 432mm W x 105mm H x 391mm D 17 W x 4-1/8 H x 15-3/8 D
  • Dimensions (w/o feet): 95mm H . . .3-3/4 H
  • Weight: 10.2 kg /22.5 lbs.

8x8 Component Matrix Switch Contents:

  • 1 - 8x8 Component Matrix Switch
  • 1 - User Manual

Why not buy this 8x8 Component Matrix Switch today


Make Offer




Q: How to I field upgrade the 8x8 Component Matrix Switch to 16 and 24 outputs?

A: Buy one or two more units and then use either Y adapters or a distribution amp on the input side. Each chassis has impedance switches for the video inputs so that you can maintain perfect picture quality. For control, each chassis has DIP switches so that you can set it to be unit #1, #2 or #3.

Q: What RS232 software comes with the 8x8 Component Matrix Switch?

A: No software is required or included. Most terminal programs can do this, but the idea is to use a controller that has 232 capability that has been 'taught' the correct 232 commands. Something like RTI, Control4, AMX, URC, Elan, Xantech and Crestron, etc.

Q: How does one control Bass, treble and balance control for each zone?

A: Discrete IR or 232 commands

Q: Tell me about the IR accessories that comes with the 8x8 Component Matrix Switch.

A: It does not come with any IR accessories. It supports any IR emitter that is two wire 1/8" with the tip being positive. That's Xantech, Elan, Niles, etc. Almost every emitter in the North American market is compatible. For IR sensors, the pin out and voltage varies a lot. So, the IR inputs are two wire as well. That allows you to connect about any RF remote base station, controller (Control4, Crestron, AMX) or connecting block via an IR output from that item to the matrix's IR input with a simple two conductor 1/8" to 1/8" cable. You can do that using the Global input and discrete zone commands or you can use the basic commands and use one of the discrete zone IR inputs.

Length is standard, which is at least a thousand feet when using something like IR to CAT5 extenders.

1 Year Warranty HDTV Supply includes a 1 Year Limited U.S. Warranty on this 8x8 Component Matrix Switch. The U.S. warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt & (b) that the 8x8 Component Matrix Switch will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective 8x8 Component Matrix Switch, HDTV Supplys Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested & all components included. A 30-day RETURN also comes with this warranty as well as Free Lifetime Tech Support.

HDTV Supply also sells a 3 and 5 Year Extended U.S. Warranty for this 8x8 Component Matrix Switch. Please go to Extended Warranties or see the above Options to purchase it.

8x8 Component Matrix Switch - OEMs Only
Ask a Question

Questions & Answers

Ask a question about the 8x8 Component Matrix Switch - OEMs Only or Call 833-WOLFPACK (833-965-3722)

Your email:
Your question:



8x8 Component Matrix Switch - OEMs Only

Recently Viewed Items