4K 1x7 HDMI Matrix Over LAN

WolfPack

$900.00
Part Number:
4K-1x7-SPLITTER
UPC:
728370342000
Availability:
In Stock
1:
WolfPack 4K 30 Hz 1x7 HDMI Splitter Over LAN
2:
Gorgeous 4K 30 Hz Picture
3:
Sends & Receives 4K 30 Hz UHD HDMI up to 400'
4:
Remote IR controls sources from TV locations

HDTV Supplys WolfPack 4K 1x7 HDMI Splitter Over LAN is a simple to install preconfigured 4K HDMI splitter over IP. This HDbitT HDMI video splitter allows for the distribution of high definition 4K video & audio signals using off-the-shelf Gigabit IGMP switches.

The 4K 1x7 HDMI Matrix Over LAN uses advanced HDbitT technology supporting a video resolution up to 4Kx2K@30Hz Ultra HD. Upgrade any-size 4K 1x7 HDMI Matrix Over LAN with only the number of ports available on the Ethernet LAN switch limiting the ins & outs of your design.

Multiple receivers (up to 65,000 HDMI receivers or TVs) can be simultaneously connected to one transmitter. This 4K 1x7 HDMI Splitter Over LAN taps into the benefits of Ethernet standards to overcome the inherent limitations of TMDS. The 4K 1x7 HDMI Splitter Over LAN allows reliable cable runs up to 120m with easy splitting and distribution of HDMI audio and video signals with perfect signal integrity.

This 4K 1x7 HDMI Splitter Over LAN is compliant with HDCP 1.4 specifications, supports copy protection with 128-bit AES encryption and overcomes traditional key verification limitations enabling very large system sizes while maintaining full HDCP compliance. And unlike first-generation Megabit implementations of IP technology, this 4K 1x7 HDMI Splitter Over LAN means picture quality that is virtually indistinguishable from the source & suitable for the most discerning viewer.

4K 1x7 HDMI Splitter Over LAN is pre-configured with:

  • 1 - 4K HDMI to LAN Transmitter
  • 7 - 4K LAN to HDMI Receivers
  • 1 - Companion 8 port Ethernet switch

What sets this 4K 1x7 HDMI Splitter Over LAN apart from others:

  • Supports IR pass back function to control the source devices from the receivers location.
  • Zero Latency
  • Sends HDMI audio and video up to 400 feet over a single CAT6/7 cable to7-TVs
  • 4K/30 UHD Compliancy
  • Upgradeable to more TVs and a full HDMI Matrix with more inputs & iPadcontrol

HDMI Over Network Transmitter & Receiver Features:

  • Plug and play.
  • Uses advanced HDbitT over IP technology.
  • Transmission distance is up to 120 meters or 400 feet via CAT6.
  • Resolution supported is up to 4K@30Hz ultra HD.
  • Upgradeable to an input and output matrix configurations allowing 100 inputs to an infinite output.
  • Supports select and switch source device input from the receiver via remote control and hard button
  • Supports IR pass back function to control the source device from the receiver location.
  • HDMI signal extension up to 100 meters or 330 feet.
  • Supports L/R stereo audio.
  • Supports one-to-one, one-to-many and many to many connections via managed switch.
  • Supports up to theoretically 65,000 receivers.
  • IR pass-through.
  • Compliant with HDMI 1.4 and HDCP 1.4 standards.
  • Audio and video are transmitted digitally over an 100 Ohm CAT6 cable for lower signal loss.
  • TV will show display source channel, which is easier for end user to control.

48-Port HDMI Over Network Managed Ethernet Switch Features:

  • 10/100Mbps Ports Managed Switch
  • Advanced standards-based enterprise features: IEEE 802.1d, 802.1x, 802.1Q, 802.1p, IGMP Snooping, SNMP and more
  • SNMP, Web-based, Telnet, Console management

Why not buy this 4K 1x7 HDMI Matrix Over LAN today?

4K 1x7 HDMI Splitter Over LAN Specification):

  • HDMI signal: HDMI1.4 and HDCP compliant
  • Network bandwidth: 28Mbps
  • HDMI input resolution supported: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz, 4Kx2K @24/25/30Hz
  • Audio format supported: L/R stereo audio
  • TMDS signal: 0.7~1.2Vp-p
  • DDC signal: 5Vp-p
  • Includes an IR Remote control
  • IR passback: Supports 20~60KHz IR devices
  • APP control: Support APP control, user can scan, preview, build up their configuration by using a phone/tablet easily, OS system supports IOS and Android
  • Matrix configuration: Up to 100 source signals can be connected and switched to infinite outputs
  • Voltage/Current: 5V/2A
  • Power consumption: TX≤6W;RX≤5W
  • Weight: TX: 320g;RX: 310g
  • Dimensions(LxWxH): 164x107.6x23.6mm
  • Working temperature: 0~60˚C
  • Storage temperature: -20~70˚C
  • Humidity: 0~95%(no condensation)
  • Color: Black

Why not buy this 4K 1x7 HDMI Splitter Over LAN today?

User Manual

Don't use EZ45 Connectors

CAT6 Installation Tips (Don't Use Patch Panels)

Why not buy this 4K 1x7 HDMI Splitter Over LAN today?

The Ethernet switch must have an IGMP function and we use the TP-LINK TL-SL3428. Other switches also may be used if they conform to a IGMP function

Why not buy this 4K 1x7 HDMI Splitter Over LAN today?