WolfPack 4K 60 Hz HDMI 2.0 AOC Fiber Cables

WolfPack

$58.00
Part Number:
HDTVAOC4K60-10M
UPC:
603134696714
Availability:
In stock
1:
WolfPack 4K 60 Hz HDMI 2.0 AOC Fiber Cables
2:
4K@60Hz 4:4:4 with HDR
3:
Doesn't need a Power Supply
4:
18G Bandwidth
5:
HDMI 2.0, HDR10 & HDCP 2.2
ADD OPTIONS:

This WolfPack 4K 60 Hz HDMI 2.0 AOC Cables is made up of active optical cables that can transmit 4K@60Hz video signal over long distances. They are made of a combination of optical fiber and copper, which allows them to achieve high bandwidth and low latency.

WolfPack 4K 60 Hz HDMI 2.0 AOC Cables Features:

  • Supports 4K@60Hz video and HDR
  • 4K@60Hz at 4:4:4 Colorspace
  • Made of a combination of optical fiber and copper
  • Available in lengths of up to 330 feet
  • Requires an active power source
  • Compatible with a wide range of devices
  • Offers high bandwidth and low latency

These cables are compatible with HDMI 2.0, and they support HDR10 and HDCP 2.2. They are also available in a variety of lengths, from 10M to 100M

Here are some of the benefits of using the WolfPack 4K 60 Hz HDMI 2.0 AOC Cables:

  • Transmit 4K@60Hz 4:4:4 video signal over long distances up to 100 meters or 330 feet.
  • Compatible with HDMI 2.0, HDR10 and HDCP 2.2
  • Made of a combination of optical fiber and copper, which allows it to achieve high bandwidth and low latency.
  • Available in a variety of lengths from 33 feet to 330 feet.

Why not buy a WolfPack 4K 60 Hz HDMI 2.0 AOC Cable today?

These WolfPack AOC (Active Optical Cable) cables are used primarily for data transmission. Instead of relying purely on copper wires for transmission (like traditional cables), AOC combines the benefits of fiber optic cables, copper cables, and electronic components to transmit data.

Here's a breakdown of how our WolfPack AOC work:

  • Active Components: The term "active" means that the cable contains active electronics to help with the transmission of data. Typically, on each end of the AOC, there's a transceiver which converts the electrical signal to an optical signal, and vice versa.
  • Optical Fiber: The main body of the cable is made up of optical fibers. These fibers carry the data in the form of light pulses. Because the transmission is optical, it allows for high-speed data transfer over longer distances without as much signal degradation compared to traditional copper cables.
  • Applications: AOCs are commonly used in data centers and high-performance computing environments, especially where high-speed data transmission is crucial.
  • Advantages: AOCs provide a few benefits over traditional cables:
    • Distance: They can transmit data over longer distances without significant loss of signal quality.
    • Speed: AOCs are capable of very high-speed data transfer.
    • No External Transceivers: Unlike traditional optical connections which require separate transceivers to be plugged into both ends, AOCs have these components integrated.

If you need a high-speed HDMI connection over a relatively long distance (compared to what copper HDMI cables can handle), a WolfPack AOC cable might be an excellent choice.

Why not buy a WolfPack AOC cable from HDTV Supply today?

What Is a WolfPack Fixed HDMI Matrix Switcher?

A WolfPack Fixed HDMI Matrix Switcher is a single-chassis device that routes any HDMI source — such as a cable box, satellite receiver, streaming player, or computer — to any TV or display in a building, simultaneously and independently. Unlike an HDMI splitter (which sends one source to many screens) or a simple HDMI switch (which selects one source for one screen), a matrix switcher lets you show a different channel on every TV at the same time. HDTV Supply has sold WolfPack fixed matrix switchers to sports bars, restaurants, hotels, churches, schools, and commercial AV integrators since 2000.

Fixed vs. Modular: Which Do You Need?

WolfPack comes in two families: Fixed and Modular. Fixed matrix switchers have a set number of inputs and outputs built into one box — for example, 4 inputs × 4 outputs (4×4) or 8 inputs × 8 outputs (8×8). They are plug-and-play, rack-mountable, and the right choice when your input/output count won't change. Modular matrix switchers use a chassis with swappable I/O cards, scaling from a few ports up to 80×80 or beyond. If you know exactly how many sources and screens you need today, a fixed unit is typically lower cost and simpler to deploy.

Available Fixed WolfPack Configurations

HDTV Supply offers WolfPack Fixed HDMI Matrix Switchers in the following sizes:

  • 4Ă—2 — 4 sources to 2 displays
  • 4Ă—4 — 4 sources to 4 displays
  • 8Ă—8 — 8 sources to 8 displays
  • 8Ă—9 — 8 sources to 9 displays
  • 16Ă—16 — 16 sources to 16 displays
  • 16Ă—32 via CAT6 — extends signal up to 450 feet over CAT6 cable

Select models include built-in video wall processing, multiview, and picture-in-picture (PIP) — allowing two or more sources to display on a single screen simultaneously.

Control Options for Fixed Matrix Switchers

Every WolfPack Fixed HDMI Matrix Switcher supports multiple control methods so you can integrate it into any environment:

  • Front-panel buttons — manual source switching directly on the unit
  • IR remote control — included with most models
  • RS-232 serial control — for integration with Crestron, Control4, AMX, and similar systems
  • TCP/IP (LAN) control — send hex commands over your network from any device
  • Web GUI — browser-based interface for switching without additional software
  • Free iOS and Android apps — available for select WolfPack models

For RS-232 hex command strings and TCP/IP control protocols, see our WolfPack HEX Code Reference and TCP/IP Control Guide.

Frequently Asked Questions

What is the difference between a fixed HDMI matrix switcher and a modular HDMI matrix switcher?

A fixed HDMI matrix switcher has a set number of HDMI inputs and outputs built into a single unit — for example, 8 inputs and 8 outputs. A modular matrix switcher uses a chassis with interchangeable I/O cards, so you can configure it for many different port counts and expand it later. Fixed units are simpler and more affordable; modular units offer flexibility for larger or changing installations.

Can a WolfPack fixed matrix switcher show different channels on different TVs at the same time?

Yes. A matrix switcher routes any input to any output independently. In an 8×8 configuration, all 8 displays can show 8 completely different sources simultaneously, or multiple displays can share the same source — in any combination you choose.

Can I control a WolfPack fixed matrix switcher from a Crestron or Control4 system?

Yes. WolfPack Fixed HDMI Matrix Switchers support RS-232 and TCP/IP control, which are standard integration protocols supported by Crestron, Control4, AMX, and other third-party control systems. HDTV Supply provides hex command strings and driver documentation to support custom integrations.

What resolution do WolfPack Fixed HDMI Matrix Switchers support?

Resolution support varies by model. WolfPack fixed matrix switchers are available in 1080p (Full HD) and 4K 30Hz configurations. Select 4K models also support HDR and HDCP 2.2. Always check the individual product specification sheet for confirmed resolution, color depth, and HDCP version.

How far can I run HDMI from a WolfPack fixed matrix switcher?

Standard HDMI outputs on fixed matrix switchers support runs up to approximately 25–50 feet depending on cable quality and resolution. The WolfPack 16×32 model transmits over CAT6 cabling for distances up to 450 feet per run. For longer distances with other fixed models, HDMI extenders can be added at each display.

What is the best HDMI matrix switcher for a sports bar?

For sports bars with up to 16 TVs, a WolfPack Fixed 16×16 HDMI Matrix Switcher is a popular choice — it handles 16 independent sources (cable boxes, satellite receivers, streaming devices) and routes any of them to any TV. For larger venues with 20–80+ TVs, HDTV Supply's WolfPack Modular Matrix Switchers or AV Over IP systems are typically the better fit. Call 833-WOLFPACK (833-965-3722) for a free consultation.

Need Help Choosing?

HDTV Supply has been helping AV integrators, sports bars, hotels, and homeowners select the right matrix switching system for 25 years. Call us at 833-WOLFPACK (833-965-3722) or email kent@hdtvsupply.com and we'll recommend the right unit for your source count, display count, resolution requirements, and control system.