This Professional 1X4 HDMI Splitter via Single CAT5 is a four-way HDMI splitter & distributes 1-HDMI input to up to 4 identical CAT5 signals. The 4 outputs are synchronized and only one CAT5e/6 cables is required going to the TVs. The HDMI Splitter over CAT5 chip-set includes a chip to makes sure the sound and the picture are in sync and no delays occur between them. 4-Receivers Included plus their AC adapters are included.
1x4 HDMI over CAT6 Splitter Features:
Plug and play.
Support one HDMI Loop-out.
Support EDID Setting function.
Support 20~60KHz IR pass back.
Wall-mounted function, easy installation.
Compatible with CAT6/6a/7 network cables.
The transmission distance is up to 40m/131ft.
The highest resolution supported is 1920x1080@60Hz.
Support power from transmitter to receiver unit over the CAT6 cable.
Distribute 1 HDMI source to 4 HDMI displays over network cables simultaneously.
Support 20~60KHz IR pass back.
Wall-mounted function, easy installation.
Compatible with CAT6/6a/7 network cables.
The transmission distance is up to 40m/131ft.
The highest resolution supported is 1920x1080@60Hz.
Support power from transmitter to receiver unit over the CAT6 cable.
Specs
The 1X4 HDMI Splitter via Single CAT5 is a product for splitting and extending your HDMI signal over long distances to a compatible display. It is designed to convert the HDMI signal and transmit by Internet cable. It also supports Transfer Bidirectional Infrared control signal together with the HDMI signal, so you can control the Source in the Sink side which is 50 meters outside, also you can control the Sink in the Source side which is 50 meters outside using the Splitter.
Why not buy this 1X4 HDMI Splitter via Single CAT5 today?
Call 833-WOLFPACK (833-965-3722) for Free Lifetime Tech Support or Product Suggestions )
