This WolfPack 1080p 8x32 AV Over IP POE Matrix Switcher sends 8-1080p HDMI video & audio signals to 32-TVs up to 450-feet away using a single CAT6/7 cable. This LAN based AV Over IP Matrix Switch sends any input, to any output, in any combination, or all outputs, all controlled with tablet, and a PC. The Ethernet switch supports both copper (CAT6/7).
8x32 AV Over IP Matrix Switcher Configuration:
- 8 - 1080p HDMI to IP Transmitters to 450'
- 32 - 1080p HDMI to IP Receivers to 450'
- 1 - 48-Port Rack mount 1G IGMP POE Managed Ethernet switch
- 1 - Wireless Access Point
- 1 - 19" Rack Mount Kit for up to 14-Transmitters
8x32 AV Over IP Matrix Switcher Features:
- Wireless Real Time Video iPad Preview: Preview the source video on an iPad before sent it to the TVs. That means your iPad will show, in real time, the videos that are on, say, all your DirecTV receivers. If you have 6-DirecTV receivers all set to different channels you'll see 6-different real-time videos, not pictures, but real time video on the iPad. You then can send them, if You choose.
- Apps & Windows Control: This LAN based 8x32 HDMI Matrix Switcher allows any input to be routed to any output; or the same input to be routed to all outputs, or any combination all controlled with an iPad and Android App, optional wall mounted touchscreens, and a Windows PC. You can even turn all the TVs OFF & ON with one iPad button.
- Video Wall Support: You can create a system with Video Walls of any size, and quantity based upon the number of outputs you have with input & output HDMI resolutions supporting up to 1920x1080@60Hz. The 8x32 AV Over IP LAN Matrix is shown in the picture.
- Cascadeable Ethernet Switches: Optionally, ethernet switches be cascaded and still act as a one large matrix. This is great for multiple floors, multiple rooms, and even multiple buildings by using fiber between them. All the many TVs will be in perfect synch with each other. The Ethernet switch supports both copper (CAT6/7) and fiber network interfaces.
- VLAN Support: This 8x32 AV Over IP Matrix Switch can be installed on your existing LAN as it have VLAN capability. Our VLAN HDMI Matrix System uses VLAN technology to isolate and protect the HDMI signals from other traffic on your network. Devices on the same VLAN can communicate with each other as if they were on the same physical network, even if they are connected to different switches or routers.
- Build Your Own (BYO) or Buy Pre-configured Systems: We offer two ways to purchase our systems, one is to BYO and the the other is buying this preconfigured 10x20 POE HDMI Over LAN Matrix Switcher.
Compare this 1080p 8x32 AV Over IP Matrix Switcher with Others:
- Wireless Real Time Video Preview
- iPad/ Android Tablet shows live source video
- Supports a VLAN
- AV Over IP w/POE Technology
- Rename Sources & Displays on tablet
- WIFI iPad & Android Apps
- 1080p video via 1G Network Switch
- Bandwidth is only 7-Mbps
- Latency is only 80ms
- Seamless 4-frame (60ms) Switching
- Video walls up to a 7x7 (49-TVs):
- Any Size Video Walls
- Any Qty Video Walls
- Windows software control
- Plug & Play (DHCP IP address)
- Supports UI custom control
- Auto-scaling from 480p@60Hz to 1080p@60Hz
- 3rd party Open UDP commands
- 19" Rack Mount cage up to 14-TXs
- Extends HDMI to 450' with CAT6/7
- Supports the H.264/H.265 Protocol
- SEC Security Compliance
- HDCP 1.4 compliant
- Separate audio outs
- Scalable Ins & Outs
- Field Upgradeable to 100s of ports
Why not buy this 1080p 8x32 AV Over IP Matrix Switcher today?
8x32 AV Over IP Matrix Switcher w/Real Time Tablet Video Preview Specs:
- Any in, to any out, in any combination
- Distances are up to 450' with CAT6/7
- iPad/Android Tablet Control
- 1080p video over an 1G Switch
- Resolutions up to 1920x1080p 4:4:4
- Scalable input and output configurations
- Field Upgradeable
- Many used in Sports Bars & Clubs
HDMI Transmitter & Receiver Over IP Specs:
- Resolutions Supported:
-
- 640 x 480@60Hz
- 480p@60Hz
- 576p@50Hz
- 800 x 600@60Hz
- 1024 x 768@60Hz
- 720p@50Hz
- 720p@60Hz
-
- 1280 x 800@60Hz
- 1280 x 1024@60Hz
- 1366 x 768@60Hz
- 1400 x 1050@60Hz
- 1440 x 900@60Hz
- 1680 x 1050@60Hz
-
- 1920 x 540@60Hz
- 1080p@24Hz
- 1080p@25Hz
- 1080p@30Hz
- 1080p@50Hz
- 1080p@60Hz
- HDMI 1.3 & HDCP 1.4 compliant
- POE or can be powered w/optional power supply
- No need to set IP settings as it's plug & play (DHCP)
- PC Software for IP address, video wall, EDID, etc
- Supports renaming the sources and displays
- 3.5mm audio on TX and RX
- ~50ms Low latency with Low latency mode
- ~250 ms latency in High quality mode
- Both Video Wall mode & matrix switch modes
- Supports iPad / Android APP control with preview function
- iPad & Android tablets are not supplied
The HDMI Transmitter and Receiver Over LAN Set allows you to simultaneously support an HDMI Signal (including 1080p video with 5.1 audio) to one or more HDMI video projectors or LCD Panels using one CAT6/7 cable over a standard Ethernet infrastructure.
Why not buy this 1080p 8x32 AV Over IP Matrix Switcher today?
Links to Documents, Software and APPs
Why not buy this 1080p 8x32 HDMI Over LAN Matrix Switcher today?
Links to Documents, Software and APPs
Why not buy this 1080p 8x32 AV Over IP LAN Matrix Switcher today?
Q: How do you test before you ship my system?
A: We put the products in the heating room for 12-hours for aging and have all the products turned On and the temperature of the heating Room set to 140 degrees. If anything fails we replace the failed unit and start the test over again.
Q: What is the switching time on the HDMI over the IP network?
A: The switching time is about 80 to 100ms.
Q: What is the latency on the HDMI over the IP network?
A: The latency is about 80ms.
Can the Ethernet switches be cascaded and still act as a matrix?
A: Yes. The network switches can be cascaded and still act as a large matrix.
Q: Is it a WEB GUI control or PC software
A: It is a PC control software-based system for the setting up the configurations
Q: How do you change the IP and MAC address of the transmitters and receivers?
A: You can change the IP address in the PC control software.
Q: The Transmitters and Receivers both have Audio out on the receiver can the audio be matrixed such as Receiver A sends audio out to Receiver B, if using the audio out?
A: The audio out on both the RX and TX are the corresponding audio with the video so its audio function is only an extract function from the video and is not able to do as an audio matrix.
Q: What is it a distance with POE in and out?
A: With the POE, the input can up to 450 ft at 1080p@60Hz and the output also is up to 450 ft at 1080p@60Hz.
Q: What type of UTP cable do you recommend?
A: As it's using for the video signal transmission we recommend using the CAT6a STP 868B cable
Q: Can you use CAT6 - 5E - 6 and 7 and is there a difference in length of cables?
A: We did the tests here with the CAT5e/CAT6/Cat7 cable and the CAT6 and CAT7 are the best and can reach a distance of 150m with POE
Q: Please give us an explanation of when the large and small streaming resolutions would be used?
A: The highest resolution can up to 1080P@60Hz, the lowest resolution is 680x480@60Hz but that resolution can't support the IP camera decoding
Q: Does the iPad / Android control require a wireless router?
A: Yes, it will need a WIFI router connected in the same system
Q: You also recommend Managed POE switches, correct?
A: Yes, the managed network switch is more stable.
Why not buy this 1080p 8x32 AV Over IP Matrix Switcher today?
Links to Documents, Software and APPs
