This Zenty ZT-496 1080P 60Hz HDBaseT HDMI over Ethernet Extender 492ft can transmit a full HD 1080P audio/video signal up to 492Ft. (150m). This extender is powered by bi-directional PoC, and only requires power to be connected to either the receiver or the transmitter, allowing for discreet installation. The ZT-EX150 uses an EDID pass-through that will automatically detect which resolutions and audio format are compatible with your display, set them to the highest options available.
The extender passes CEC commands, allowing source devices and displays that support CEC to also be turned on or off through the extender. RS-232 commands are supported for serial communication transmission of data.
Zenty ZT-496 1080P 60Hz HDBaseT HDMI over Ethernet Extender 492ft Features:
- Extend your Full HD 1080P audio/video signal up to 492Ft. over a single Cat5e/6 UTP cable using the latest HDBaseT technology
- Supports bi-directional Power over Cable; power is only required on either the transmitter or receiver end
- Bi-directional IR; control the source from the display's location or vice versa. EDID pass-through allows for wide compatibility with different resolution and refresh rate settings
- CEC and RS-232 command pass-through allows for easy control for both the display and the source device
- HD audio formats supports such as Dolby Digital, Dolby Digital+, Dolby TrueHD, DTS 5.1, LPCM
