WolfPack 4K/60 HDMI Extender over HDBaseT to 110' Announced by HDTV Supply, Inc.

Los Angeles, CA, August 17, 2019 -- HDTV Supply, one of the nation's top Internet providers of consumer electronics devices and related products, announced their new HDTV Supplys WolfPack™ 4K HDMI Extender over HDBaseT as it is using the latest HDBaseT technology which featuring no compression, no losses and no latency over HDMI signal transmission. The HDMI Extender over HDBaseT can can work with other HDBaseT equipment such as Sonys HDBaseT projector, and others.

Our Best HDMI Extender over HDBaseT signals are transmitted by one single CAT5e/ CAT6/ CAT7 cable and for 1080p it can transmit to a distance of 70m (230 feet) and for 4K60Hz (4:2:0) it can up to 35m (110 feet). The HDMI Extender over HDBaseT is compatible with all the HDTV resolutions because it supports the HDCP2.2 protocol. It also supports bi-directional RS232 and bi-directional IR transmission. The HDBaseT Extender supports Power Over Cable (POC) allowing users to power only one side, either the TX or the RX.

Using this HDMI Extender over HDBaseT with UTP cables allow you to run uncompressed 1080p high-definition HDMI signals upwards to 220 feet and optionally to 330 feet (see above Options).

What sets this HDMI Extender over HDBaseT apart from others::

  • Supports both 4K 30 and 4K 60
  • Includes IR cables
  • Includes mounting clips
  • You can buy a separate transmitter to send to an HDBaseT input TV or projector
  • You also can buy a Receiver only
  • Secure screw-on AC adapter
  • Supports both bi-directional RS232 & IR
  • 330 foot option at 1080p
  • Works with CAT5e

NOTE: HDTV Supplys implementation of the HDBaseT technology adds virtually zero latency to the HDMI audio & video signal, less than 7 microseconds (0.000007 sec) over 220 feet of CATx cable. At 100 feet you are talking about 3 microseconds (0.000003 sec). This means for example, in a church or auditorium, the speakers lips are always in synch with the video image on all the TVs & projectors 100's of feet away.

WolfPack 4K/60 HDMI Extender over HDBaseT to 110' with Lifetime Telephone, CHAT, TEXT, FAX & Email Tech Support and is available now and can be purchased at https://www.hdtvsupply.com/hdmi-extender-hdbaset.html

For further information contact:
Press Relations
HDTV Supply, Inc.
TEL: 833-WOLFPACK (833-965-3722)
FAX: (800) 435-2623
WEB: www.HDTVSupply.com
EMAIL: support[at]hdtvsupply.com

About HDTV Supply: HDTV Supply is one of the nation's top manufacturers and resellers of consumer electronics accessories and related products, with more than 9,000 products. Headquartered in Los Angeles, CA. HDTV Supply's business strategy focuses on the customers needs come first. HDTV Supply began in 2002 with the aim of products specifically built for home theater enthusiasts and for custom integrators. Many products are created in house and manufactured in the USA to exacting specifications. For further information about HDTV Supply and its products, please visit https://www.hdtvsupply.com

Contact Information
HDTV Supply, Inc.
Press Relations
833-965-3722
https://www.HDTVSupply.com

What Is a WolfPack Fixed HDMI Matrix Switcher?

A WolfPack Fixed HDMI Matrix Switcher is a single-chassis device that routes any HDMI source — such as a cable box, satellite receiver, streaming player, or computer — to any TV or display in a building, simultaneously and independently. Unlike an HDMI splitter (which sends one source to many screens) or a simple HDMI switch (which selects one source for one screen), a matrix switcher lets you show a different channel on every TV at the same time. HDTV Supply has sold WolfPack fixed matrix switchers to sports bars, restaurants, hotels, churches, schools, and commercial AV integrators since 2000.

Fixed vs. Modular: Which Do You Need?

WolfPack comes in two families: Fixed and Modular. Fixed matrix switchers have a set number of inputs and outputs built into one box — for example, 4 inputs × 4 outputs (4×4) or 8 inputs × 8 outputs (8×8). They are plug-and-play, rack-mountable, and the right choice when your input/output count won't change. Modular matrix switchers use a chassis with swappable I/O cards, scaling from a few ports up to 80×80 or beyond. If you know exactly how many sources and screens you need today, a fixed unit is typically lower cost and simpler to deploy.

Available Fixed WolfPack Configurations

HDTV Supply offers WolfPack Fixed HDMI Matrix Switchers in the following sizes:

  • 4×2 — 4 sources to 2 displays
  • 4×4 — 4 sources to 4 displays
  • 8×8 — 8 sources to 8 displays
  • 8×9 — 8 sources to 9 displays
  • 16×16 — 16 sources to 16 displays
  • 16×32 via CAT6 — extends signal up to 450 feet over CAT6 cable

Select models include built-in video wall processing, multiview, and picture-in-picture (PIP) — allowing two or more sources to display on a single screen simultaneously.

Control Options for Fixed Matrix Switchers

Every WolfPack Fixed HDMI Matrix Switcher supports multiple control methods so you can integrate it into any environment:

  • Front-panel buttons — manual source switching directly on the unit
  • IR remote control — included with most models
  • RS-232 serial control — for integration with Crestron, Control4, AMX, and similar systems
  • TCP/IP (LAN) control — send hex commands over your network from any device
  • Web GUI — browser-based interface for switching without additional software
  • Free iOS and Android apps — available for select WolfPack models

For RS-232 hex command strings and TCP/IP control protocols, see our WolfPack HEX Code Reference and TCP/IP Control Guide.

Frequently Asked Questions

What is the difference between a fixed HDMI matrix switcher and a modular HDMI matrix switcher?

A fixed HDMI matrix switcher has a set number of HDMI inputs and outputs built into a single unit — for example, 8 inputs and 8 outputs. A modular matrix switcher uses a chassis with interchangeable I/O cards, so you can configure it for many different port counts and expand it later. Fixed units are simpler and more affordable; modular units offer flexibility for larger or changing installations.

Can a WolfPack fixed matrix switcher show different channels on different TVs at the same time?

Yes. A matrix switcher routes any input to any output independently. In an 8×8 configuration, all 8 displays can show 8 completely different sources simultaneously, or multiple displays can share the same source — in any combination you choose.

Can I control a WolfPack fixed matrix switcher from a Crestron or Control4 system?

Yes. WolfPack Fixed HDMI Matrix Switchers support RS-232 and TCP/IP control, which are standard integration protocols supported by Crestron, Control4, AMX, and other third-party control systems. HDTV Supply provides hex command strings and driver documentation to support custom integrations.

What resolution do WolfPack Fixed HDMI Matrix Switchers support?

Resolution support varies by model. WolfPack fixed matrix switchers are available in 1080p (Full HD) and 4K 30Hz configurations. Select 4K models also support HDR and HDCP 2.2. Always check the individual product specification sheet for confirmed resolution, color depth, and HDCP version.

How far can I run HDMI from a WolfPack fixed matrix switcher?

Standard HDMI outputs on fixed matrix switchers support runs up to approximately 25–50 feet depending on cable quality and resolution. The WolfPack 16×32 model transmits over CAT6 cabling for distances up to 450 feet per run. For longer distances with other fixed models, HDMI extenders can be added at each display.

What is the best HDMI matrix switcher for a sports bar?

For sports bars with up to 16 TVs, a WolfPack Fixed 16×16 HDMI Matrix Switcher is a popular choice — it handles 16 independent sources (cable boxes, satellite receivers, streaming devices) and routes any of them to any TV. For larger venues with 20–80+ TVs, HDTV Supply's WolfPack Modular Matrix Switchers or AV Over IP systems are typically the better fit. Call 833-WOLFPACK (833-965-3722) for a free consultation.

Need Help Choosing?

HDTV Supply has been helping AV integrators, sports bars, hotels, and homeowners select the right matrix switching system for 25 years. Call us at 833-WOLFPACK (833-965-3722) or email kent@hdtvsupply.com and we'll recommend the right unit for your source count, display count, resolution requirements, and control system.