This HDTV Supply WolfPack 4K 30 Hz 4x1 Switcher, Scaler and Rotator is a 4K vertical screen signal conversion processor with a compact embedded design. It supports up to four HDMI inputs and one HDMI output (up to 4K60) with 3.5mm audio out and built-in resolution scaling. All processing is hardware-based, requiring no software, simply use the front push buttons for switching, scaling, and rotation.
It features advanced video processing technologies, including motion detection and compensation, interpolation, edge smoothing, and noise suppression. The unit supports rotation of any input to 90°, 180°, or 270°, with input resolutions up to 4K30 (or 4K60 on HDMI IN3). Control options include front panel buttons, IR remote, and RS232.
SUPPORT UP TO 4K 30 Hz INPUTS: This switch can easily handle any resolution up to 4K 30 Hz. With four inputs, you can connect all of your devices and easily switch between them.
4K 60 Hz OUTPUT: Not only does this box support resolutions up to 4K 30 Hz , but it also outputs at 60 frames per second for smooth video.
EASY CONTROL: Three easy methods of control: front panel push button, IR remote, and RS232. Plus, the 3.5mm audio de-embedded port lets you send the audio signal from the HDMI source to an external amplifier.
PLUG AND PLAY: No need to set up or configure anything! Simply plug in your devices and start using them. The low power consumption means this box is perfect for busy setups that need a lot of ports.
HDTV Supply WolfPack 4K 30 Hz 4x1 Switcher, Scaler and Rotator Features:
- Support up to 4K 30 Hz inputs and a 4K 60 Hz output
- Supports front panel push-button, IR remote and RS-232 control
- Supports the 3.5mm audio de-embedded
- Pure hardware structure, plug and play, no need to set up, easy to operate.
- Supports 90/180/270 degree image rotation
- Low power consumption
Why not buy this HDTV Supply WolfPack 4K 30 Hz 4x1 Switcher, Scaler and TV Rotator today?
HDTV Supply WolfPack 4K 30 Hz 4x1 Switcher, Scaler and TV Rotator Specifications:
- Input: 1 x HDMI2.0(4K60); 3 x HDMI1.4(4K30)
- Output: 1 x HDMI2.0
- Input: 4 x HDMI
- Input audio signal: RAW PCM, 16 bit, 32/44.1/48KHz sps; PCM 2.0
- Output: 1 x HDMI2.0;1 x Analog Audio
- Output audio signal: RAW PCM, 16 bit, 32/44.1/48KHz sps; PCM 2.0
Control method
- Front panel button
- IN1: Switch to Input 1
- IN2: Switch to Input 2
- IN3: Switch to Input 3
- IN4: Switch to Input 4
- RES: Set up the output resolution switching to 720P, 1080P, 4K30, 4K60
- ROTATE: To rotate the HDMI output to 90/180/270 degrees
- IR: Can realize all the functions of the button, also support fast switching
- RS232: The interface is a 3pin phoenix segment, which support third-party control
General parameters
- Operating temperature: 0 to +45°C (32 to + 113 °F)
- Storage temperature: -20 to +70°C (-4 to + 158 °F)
- Relative humidity: 10% to 90%
- Static Protection:
- Human body discharge mode:±8kV (Air gap discharge)/
- ±4kV (Contact discharge)
- Power supply: 12 V 1.5 A DC
- Power consumption: 10W(Max)
- Measure: 223X27X97(mm)
- Net weight: 0.8kg
Why not buy this HDTV Supply WolfPack 4K 30 Hz 4x1 Switcher, Scaler and TV Rotator today?
Brochure for 4K 4X1 HDMI Image rotator
