tvONE 2211107-01 VOYAGER CF-18 Fiber Optic 2-port HDMI/DVI Transmitter Card Magenta Research is a 2-port fiber optic transmitter designed for use with the Voyager CF-18 chassis. The chassis is 4U and can be mounted on a rack. The Voyager CF-HDMI-TX2 transmitter is a fundamental step in the extending and distributing of audio, video (HDMI with HDCP or DVI), signals through fiber-optic cable.
One CF-18 chassis can power 18 CF-HDMI-TX2 transmitters presenting users with neater racks and efficient installation process instead of expending power by individually rack mounting and installing each Voyager transmitters. The extent of transmission depends on the receiver used.
- Two duplex fiber output ports
- Transmitter card for use with Voyager CF-18 chassis
- Uncompressed multi-format video at 1920x1200
- Distance range of up to 18.75MI/30KM determined by receiver
- Singlemode or multimode fiber support
- Advanced EDID management and HDCP compliance
- Local video output (HDMI)
- Unit ships with one (1) multimode fiber optic SFP module
Why not buy this tvONE 2211107-01 VOYAGER CF-18 Fiber Optic 2-port HDMI/DVI Transmitter Card Magenta Research today?
tvONE 2211107-01 VOYAGER CF-18 Fiber Optic 2-port HDMI/DVI Transmitter Card Magenta Research
|DC input power||+5 VDC, Consumption 5 Watts Maximum|
Video input formats (video input port):
Video output formats (local output port):
|Audio Characteristics||This module recognizes all 8 channels (if present) of embedded HDMI audio, passing them through the system to the receiver.|
|Connectors||(1) HDMI-input, (1) HDMI-output|
|EDID/DDC||This module supports the EDID/DDC connections on the HDMI connectors.|
|HDCP||Version 1.1. Classification: HDCP Repeater Device|
|CEC||The HDMI "CEC" interface protocol is not currently supported.
(Note: The hardware is capable. A future firmware upgrade may enable this functionality.
|Environmental||Operating temperature: 32 to 104˚F (0 to 40˚C).
Storage temperature: -4 to +140˚F (-20 to +60˚C).
Humidity: 80% RH, non-condensing.
|Enclosure||Steel (0.040"/1mm thick).|
|Powder-coat black paint, white epoxy graphics.|
|Serial Interface||RS232 standard serial interface. Reflects DCE pinout standard.
Signals: TXD, RXD, RTS, CTS, DSR, DTR, DCD and RI.
Speeds: 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 Baud.
Format: 8 data. 1 or 2 stop bits. no parity bit.
Flow control: Hardware and software flow-control is available, configurable on/ off.
Connector: DB9-Female, w/4-40 standoffs.
Note: Speed and data format are software-configurable via MAGui.
The ISA hardware is capable hardware and software (Xon/Xoff) handshaking. However, this capability is not yet enabled by the firmware. Check with Magenta Research for applicable firmware updates.
|Audio interface||Discrete Left and Right line-level audio.
This module can function as an input (for TX) or output (for RX) device. The audio signal direction is under software control, and is selected automatically by the type of CORE module being used.
Audio-input mode (when used with VG-TX2 CORE):
Input voltage: 2V peak-to-peak, maximum.
Input impedance: >= 10K ohms.
Input coupling: AC (capacitive).
Input sample rate: 48KHz
Input frequency response: 20-20KHz, (@-3dB).
Audio-output mode (when used with VG-RX CORE):
Output voltage: 2V peak-to-peak, maximum.Output impedance: <= 100 ohms.
Output coupling: AC (capacitive).
Output sample rate: 48KHz
Output frequency response: 20-20KHz, (@-3dB).
Connector: 3.5mm (1/8") stereo-phono type jack.
|System Size||Assumes a typical 3-module configuration consisting of:
VIDEO + CORE + ISA modules, docked together:
.875"(2.22cm)H x 6"(15.25cm)W x 5"(13.97cm)D
Weight: 1.4lbs (.635kg)
Questions & Answers
Ask a question about the tvONE 2211107-01 VOYAGER CF-18 Fiber Optic 2-port HDMI/DVI Transmitter Card Magenta Research or Call 800-841-9238