This Thor Broadcast H-8QAM-IP 8 x QAM Inputs to IP Gateway. 8 Independent DVB-C QAM Annex A or B input to IP TS SPTS multicast or unicast outputs. PN H-8QAM-IP Each TS program - "subchannel" from any QAM Channel can be converted to IP stream - UDP/RTP/RTSP
This gateway and transmodulator is a unique device that can easily convert existing RF streams, up to 8 frequencies and convert to IP and RF channels. This will allow you to add any RF to existing RF channel bank as well as create IP streams for easy access via LAN. For consideration you can convert DVB-T to IP and QAM, or you can convert ATSC to IP and QAM, or also use it as a translator so you can take 8 QAM frequencies and convert to IP and 8 QAM (different frequencies, if you like to rearrange your channel lineup). The vast array of options make this an ideal headend piece to quickly and efficiently become more dynamic, add free OTA channels to a QAM headend, or simply create a RF to IP gateway with existing RF programs. This is the exact same unit that is mentioned above with the added benefit of transmodulation, we can essentially mix and match any RF to any RF with a couple exceptions. Please contact your local dealer or Thor directly for more information.
Thor Broadcast H-8QAM-IP 8 x QAM Inputs to IP Gateway Features:
- 8 Tuner (DVB-S2/DVB-T)
- 8 Tuner (ATSC)
- 8 Tuner (QAM)
- 8 Tuner (ISDB-T)
- QAM-256/64 & ATSC (8VSB) formats supported
- IP TS output
- MPTS over UDP, RTP/RTSP output as mirror of ASI output (RJ45)
- SPTS optional as well
- 2 ASI Inputs means it can be used as a dual ASI to IP Gateway as well
- Integrated demodulating and multiplexing functions
- Select which channels to stream out via SPTS
- Multiplex one program to all outputs
- Closed Captions supported
- Full IP control and Network Management through browser
- IPTV Output Unicast or Multicast IGMP UDP
- Low Latency available 10-20ms
- AC3, MPEG2 Audio
- MPEG2 Video or MPEG4 H.264
- Perfect Full HD Video Quality - No Loss
- 2 Year Warranty
Why not buy this Thor Broadcast H-8QAM-IP 8 x QAM Inputs to IP Gateway today?
Thor Broadcast H-8QAM-IP 8 x QAM Inputs to IP Gateway Specifications:
|
PN: H-8ATSC-IP PN: H-8QAM-IP PN: H-8DVBS-IP PN: H-DVB-T-IP PN: H-ISDB-T-IP |
8 x ATSC Antenna 8 x Cable QAM 8 x Satellite S2 8 x DVB-T Antenna 8 x ISDB-T Antenna |
|
All HD and SD |
|
|
MPEG-2 HD 1.5-19.5 Mbps H.264 HD 0.8-19.5 Mbps |
|
|
MPEG-1 Layer II MPEG-2 AAC MPEG-4 AAC AC3 Dolby |
|
|
48 kHz | |
|
64 kbps, 96 kbps, 128 kbps, 192 kbps, 256 kbps, 320 kbps | |
|
ATSC, DVB-C, DVB-S2 (model dependent) | |
|
30-960 MHz for QAM and ATSC, 850-2100Mhz for L-band | |
|
5-35 dBmV | |
|
MPTS over UDP, RTP/RTPS out as mirror of ASI output (RJ45) | |
|
100-240 VAC Auto-Switching ~ 20 W |
|
|
19 x 9 x 3 Inches | |
|
6 Pounds | |
|
32-110 F | |
Why not buy this Thor Broadcast H-8QAM-IP 8 x QAM Inputs to IP Gateway today?
Thor Broadcast H-8QAM-IP RF to IP Gateway Manual
Why not buy this Thor Broadcast H-8QAM-IP 8 x QAM Inputs to IP Gateway today?
Can this unit take 8 QAM channels and convert each program to an IP stream?
A: Yes — the H-8QAM-IP accepts up to eight QAM inputs and can convert each TS program (subchannel) from any QAM channel into IP streams (UDP/RTP/RTSP).
Does the gateway support unicast and multicast IPTV output?
A: Yes — the device supports IPTV output as unicast or multicast over IGMP/UDP and can output MPTS over UDP and RTP/RTSP as a mirror of ASI.
Can the unit produce single-program transport streams (SPTS) as well as MPTS?
A: Yes — the H-8QAM-IP can output MPTS and SPTS (SPTS listed as optional).
Will this gateway preserve closed captions and common audio codecs in the stream?
A: Yes — the unit lists support for closed captions and common audio codecs including AC3, MPEG-1 Layer II, MPEG-2 AAC, and MPEG-4 AAC.
Does the H-8QAM-IP include ASI connectivity or use ASI as a control/output mirror?
A: Yes — the product includes two ASI inputs and can mirror ASI output to IP (RJ45).
What video codecs and bitrates are supported for IP output?
A: The H-8QAM-IP supports MPEG-2 HD (1.5–19.5 Mbps) and H.264 HD (0.8–19.5 Mbps) for video encoding.
Is low-latency streaming available from this gateway?
A: Yes — the product lists a low-latency mode with latency in the 10–20 ms range.
Can the unit demodulate multiple broadcast standards or is it limited to QAM?
A: The product page lists support for multiple tuner variants (QAM, ATSC, DVB-T, DVB-S2, ISDB-T) but some model-dependent phrases appear; the H-8QAM-IP entry specifically describes QAM inputs.
Can I select individual programs to stream or multicast the same program to all outputs?
A: Yes — you can select which channels (programs) to stream as SPTS and the unit can also multiplex one program to all outputs.
Will I be able to manage the device over the network from a browser?
A: Yes — the H-8QAM-IP provides full IP control and network management through a browser interface.
Can this gateway be used to add over‑the‑air channels into a QAM headend lineup?
A: Yes — the product description states it can add OTA channels into a QAM headend by converting RF signals to IP and QAM for integration.
What IP protocols can the outputs use for streaming?
A: The unit can output streams over UDP, RTP, and RTSP and supports IGMP for multicast delivery.
