This Thor Broadcast H-1RGB-DVBS2 1Ch RGB to DVB-S2 Satellite Encoder Modulator system for digital satellite news gathering or DVB-S2 satellite transport. Designed for use in DSNG trucks or installed in satellite broadcast fly pack enclosures. Provides full HD encoding of 1 channel of live video from any HDMI or component analog signal source. The chassis also provides an ASI input to multiplex externally encoded programs into the DVB-S2 RF carrier output for added flexibility. For backwards compatibility, both DVB-S2 and DVB-S modulation protocols are supported on the RF output. The BISS satellite encryption standard allows secure transmission of live video by making the feed impossible to decode without a pre shared key. The chassis supports most Thor Broadcast single depth encoder cards, with support for every major video signal format. All settings and configuration options are available via the front panel keyboard and LCD, as well as through a standard web server based network management system. For powering the uplink antenna the unit has the option of providing 24VDC over the coax output, this feature can be enabled or disabled through either management interface. This system will accept programming via ASI and encode 1 channel of full HD video at 1080p60 from any HDMI or component analog source
Thor Broadcast H-1RGB-DVBS2 1Ch RGB to DVB-S2 Satellite Encoder Modulator Features:
- 1x HDMI/RGB Input and 1x ASI Input / DVB-S/S2 & ASI Output
- Distribut ASI or Uncompressed Video over Satellite RF
- Combination Encoder, Modulator, & ASI Mux
- Controlled through web server on separate network port
- Encodes in MPEG-2 or H.264 video codecs at 0.5 - 19 Mbps
Why not buy this Thor Broadcast H-1RGB-DVBS2 1Ch RGB to DVB-S2 Satellite Encoder Modulator today?
Thor Broadcast H-1RGB-DVBS2 1Ch RGB to DVB-S2 Satellite Encoder Modulator Specifications:
- Video Formats: 1080p, 1080i, 720p
- Video Types: YPbPr, HDMI
- Frame Rates: 50, 59.94, 60 fps
- Video Codecs: MPEG-2, H.264
- Video Bit Rates: 0.5 - 19.5 Mbps, CBR or VBR
- Audio Codecs: MPEG1 Layer2, MPEG2 Layer2, AAC
- Audio Bit Rates: 64 - 32 kbps (6 steps)
- ASI Input: SPTS, MPTS (up to 80Mbps)
- ASI Output: SPTS, MPTS (up to 80Mbps)
- RF Output: DVB-S, DVB-S2
- IP Managment: HTTP Webserver port 80
- Power Input: 100-240 VAC Auto Switching 35W
- Dimensions: 482 x 300 x 44 mm
- Weight: 3.75 kg
- Operating Temperature: 0 - 45 °C
Why not buy this Thor Broadcast H-1RGB-DVBS2 1Ch RGB to DVB-S2 Satellite Encoder Modulator today?
Thor Broadcast H-1RGB-DVBS2 User Manual
Why not buy this Thor Broadcast H-1RGB-DVBS2 1Ch RGB to DVB-S2 Satellite Encoder Modulator today?
What video inputs does the H-1RGB-DVBS2 accept?
A: It accepts one HDMI input and one component (YPbPr/RGB) analog input.
Which video formats and frame rates can it encode?
A: It encodes common HD formats including 1080p, 1080i and 720p at 50, 59.94 and 60 fps.
Which video codecs does the encoder support?
A: The unit supports MPEG-2 and H.264 video codecs.
Can the chassis accept an ASI stream and also output ASI?
A: Yes — it provides both an ASI input and an ASI output and can pass SPTS or MPTS streams.
What RF modulation formats does the RF output support?
A: The RF output supports DVB-S and DVB-S2 modulation.
Does the system support satellite encryption for secure feeds?
A: Yes — it supports the BISS satellite encryption standard for secure transmission using a pre-shared key.
How can I configure and manage the H-1RGB-DVBS2?
A: You can configure it using the front-panel keyboard and LCD or remotely via its HTTP web server on a separate network port (port 80).
Does the unit support external ASI multiplexing into the RF carrier?
A: Yes — the ASI input can be used to multiplex externally encoded programs into the DVB-S2 RF carrier output.
What audio codecs and bit rates are supported?
A: It supports MPEG‑1 Layer II, MPEG‑2 Layer II and AAC audio codecs with audio bit rate steps listed as 64 - 32 kbps (6 steps).
Can I power an uplink antenna from the unit over the RF coax?
A: Yes — the unit has an option to provide 24 VDC over the coax output to power an uplink antenna, and that feature can be enabled or disabled through the management interfaces.
Is this encoder intended for use in mobile DSNG trucks or fly pack enclosures?
A: Yes — it was designed for use in DSNG trucks and for installation in satellite broadcast fly pack enclosures.
