This Thor Broadcast F-2Tel USB Fiber Optic Transmission System is used for carrying analog phone over fiber fiber optic cable. Telephone over Fiber applications offer a secure connection that is impossible to bug. The PSTN two-wire POTS telephone port can be configured either as an FXO (PBX trunk) or FXS (telephone set/fax machine/dial-up modem) device just by a simple DIP switch setting. Using two of these devices, a telephone line can be extended over a fiber link. The F-1TEL provides full service for features like caller ID. The converter can be used in service mode, allowing connection of 2 telephone sets. The unit offers SNMP allowing remote management and sensing of converter status, type, version, fiber link status, RJ11 port status, and alarms. The F-1TEL is a RJ11 to Fiber Optic Converter with a simple and reliable solution for data carriers and service providers for Telephone over Fiber links.
Thor Broadcast F-2Tel USB Fiber Optic Transmission System Features:
- Extend telephone voice transmission from 2km to 120km over fiber
- Network management via terminal, web or SNMP
- Supports telephone voice transmission
- Supports caller ID pass through
- Selectable FXO or FXS mode
- Supports FXS to FXS hot lin
Why not buy this Thor Broadcast F-2Tel USB Fiber Optic Transmission System today?
Thor Broadcast F-2Tel USB Fiber Optic Transmission System Specifications:
| Optical Interface | |
|
ST/PC |
|
MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km |
|
MM 1310nm, SM 1310, 1550nm, WDM 1310Tx/1550Rx, 1550Tx/1310Rx |
| Electrical Interface | |
|
RJ-11 |
|
600 ohms, Coding : 16 bits liner, Loop Current : 10~100mA Ring Frequency : Acceptable 20 ~50Hz, Insertion Loss: 0.0 ± 1.0dB at 1000H |
|
Impedance : 600 ohms, Coding : 16 bits liner, Dial: DTMF and Dial Paul, Battery Source: 48VDC ± 4 |
|
Sine Wave |
|
20/25/30/50 Hz selectable |
|
FXS to FXS : On / 1 sec, Off / 2 sec |
|
Reproduces the cadence detected by FXO Insertion Loss 0.0 ± 1.0dB at 1000Hz REN: 4.0B(Ring Equivalence Number |
|
Power, FX Link, Phone Act, Test |
|
DC IN 12V |
|
5 W |
|
480mm x 225mm x 44mm |
|
0~50°C (Operating) 0~70°C (Storage) |
|
CE, FCC, LVD, RoHS |
|
125,000 h (25°C) |
