Thor Broadcast F-2CC-B-TxRx 2 Bi-Directional Contact Closure

Thor Broadcast

Thor Broadcast F-2CC-B-TxRx 2 Bi-Directional Contact Closure
Price: $1,194.00
Today's Price: $995.00

5% Discount. Apply Code 5percentOff at Checkout!

Part Number:
F-2CC-B-TxRx
UPC:
793132855883
Condition:
New
Availability:
In Stock
1:
2 Relay Bi-Directional Contact Closure
2:
Contact Closure or TTL over Fiber
3:
Point-to-Point or Daisy-Chain Connection
4:
No EMI or RFI & No Ground Loops
5:
Free USA Shipping
6:
Ships with the latest firmware
7:
2-Year Warranty
ADD OPTIONS:

This Thor Broadcast F-2CC-B-TxRx 2 Bi-Directional Contact Closures or TTL over Fiber Transmitter/Receiver Kit 20Km that allow you to send electrical signals over fiber optic cable.

This works exactly like a relay - electrical on/off switch than can be controlled from the transmitter to the receiver or in both directions, for example if we will close or short 2 pins on the TX side it will close it on the receiving side which allows the current to flow, so you can turn off or turn on any device remotly over fiber. You can also send 5Vpp TTL pulses or signals.

The base unit works for 20Km over single-mode fiber or 3000 feet  of multimode fiber - ST/PC fiber connectors

They are typically used in applications with Access Control System, Alarm Event Triggering, Building Automation, and Environmental Control Systems, Fire & Alarm Systems, PIR signal Transmission, Traffic Signal Control Equipment, etc, and are available for stand-alone or rack-mount installations. ST/PC is standard; please call or ask your representative about SC or FC optical connectors if needed.

Plug and Play design ensures adjustment-free installation and operation, and optical adjustments are never required. LED indicators are provided to instantly monitor the system operating status.

Thor Broadcast F-2CC-B-TxRx 2 Bi-Directional Contact Closures or TTL over Fiber Transmitter/Receiver Kit 20Km Features:

  • Point-to-Point or Daisy-Chain connection
  • Dry Contact Closure or TTL data over one fiber
  • Normally Open ON/OFF switch over fiber
  • Multimode Fiber Supported for Distances up to 3000ft
  • Single-Mode Fiber Support for Distances up to 20 km based model, other distances available for long haul (model dependent)
  • LED Status Provides Real-Time Indication of Operating Parameters
  • No EMI or RFI and no ground loops
  • Stand-alone or (Rackmount - Model Dependent)

Why not buy this Thor Broadcast F-2CC-B-TxRx 2 Bi-Directional Contact Closures or TTL over Fiber Transmitter/Receiver Kit 20Km today?

Thor Broadcast F-2CC-B-TxRx 2 Bi-Directional Contact Closures or TTL over Fiber Transmitter/Receiver Kit 20Km Specifications:

  • Electrical & Mechanical
    • Input Power Requirements: DC 5V@2A
    • Power Adapter: AC 90V~240V
    • Power Consumption: < 3W
    • Stand-Alone Dimensions: 104mm × 104mm × 28mm or, 183mm × 154mm × 30mm
    • Shipping Weight: (includes Transmitter & Receiver ) 0.8kg or 1.5kg
  • Environmental
    • Operating Temperature: -20°C ~ +75°C
    • Storage Temperature: -20°C ~ +75°C
    • Storage Temperature: -40°C ~ +85°C
    • Relative Humidity: 0% ~ 95% (non-condensing)
    • MTBF: >100,000 hours

Why not buy this Thor Broadcast F-2CC-B-TxRx 2 Bi-Directional Contact Closures or TTL over Fiber Transmitter/Receiver Kit 20Km today?

What Is a WolfPack Fixed HDMI Matrix Switcher?

A WolfPack Fixed HDMI Matrix Switcher is a single-chassis device that routes any HDMI source — such as a cable box, satellite receiver, streaming player, or computer — to any TV or display in a building, simultaneously and independently. Unlike an HDMI splitter (which sends one source to many screens) or a simple HDMI switch (which selects one source for one screen), a matrix switcher lets you show a different channel on every TV at the same time. HDTV Supply has sold WolfPack fixed matrix switchers to sports bars, restaurants, hotels, churches, schools, and commercial AV integrators since 2000.

Fixed vs. Modular: Which Do You Need?

WolfPack comes in two families: Fixed and Modular. Fixed matrix switchers have a set number of inputs and outputs built into one box — for example, 4 inputs × 4 outputs (4×4) or 8 inputs × 8 outputs (8×8). They are plug-and-play, rack-mountable, and the right choice when your input/output count won't change. Modular matrix switchers use a chassis with swappable I/O cards, scaling from a few ports up to 80×80 or beyond. If you know exactly how many sources and screens you need today, a fixed unit is typically lower cost and simpler to deploy.

Available Fixed WolfPack Configurations

HDTV Supply offers WolfPack Fixed HDMI Matrix Switchers in the following sizes:

  • 4Ă—2 — 4 sources to 2 displays
  • 4Ă—4 — 4 sources to 4 displays
  • 8Ă—8 — 8 sources to 8 displays
  • 8Ă—9 — 8 sources to 9 displays
  • 16Ă—16 — 16 sources to 16 displays
  • 16Ă—32 via CAT6 — extends signal up to 450 feet over CAT6 cable

Select models include built-in video wall processing, multiview, and picture-in-picture (PIP) — allowing two or more sources to display on a single screen simultaneously.

Control Options for Fixed Matrix Switchers

Every WolfPack Fixed HDMI Matrix Switcher supports multiple control methods so you can integrate it into any environment:

  • Front-panel buttons — manual source switching directly on the unit
  • IR remote control — included with most models
  • RS-232 serial control — for integration with Crestron, Control4, AMX, and similar systems
  • TCP/IP (LAN) control — send hex commands over your network from any device
  • Web GUI — browser-based interface for switching without additional software
  • Free iOS and Android apps — available for select WolfPack models

For RS-232 hex command strings and TCP/IP control protocols, see our WolfPack HEX Code Reference and TCP/IP Control Guide.

Frequently Asked Questions

What is the difference between a fixed HDMI matrix switcher and a modular HDMI matrix switcher?

A fixed HDMI matrix switcher has a set number of HDMI inputs and outputs built into a single unit — for example, 8 inputs and 8 outputs. A modular matrix switcher uses a chassis with interchangeable I/O cards, so you can configure it for many different port counts and expand it later. Fixed units are simpler and more affordable; modular units offer flexibility for larger or changing installations.

Can a WolfPack fixed matrix switcher show different channels on different TVs at the same time?

Yes. A matrix switcher routes any input to any output independently. In an 8×8 configuration, all 8 displays can show 8 completely different sources simultaneously, or multiple displays can share the same source — in any combination you choose.

Can I control a WolfPack fixed matrix switcher from a Crestron or Control4 system?

Yes. WolfPack Fixed HDMI Matrix Switchers support RS-232 and TCP/IP control, which are standard integration protocols supported by Crestron, Control4, AMX, and other third-party control systems. HDTV Supply provides hex command strings and driver documentation to support custom integrations.

What resolution do WolfPack Fixed HDMI Matrix Switchers support?

Resolution support varies by model. WolfPack fixed matrix switchers are available in 1080p (Full HD) and 4K 30Hz configurations. Select 4K models also support HDR and HDCP 2.2. Always check the individual product specification sheet for confirmed resolution, color depth, and HDCP version.

How far can I run HDMI from a WolfPack fixed matrix switcher?

Standard HDMI outputs on fixed matrix switchers support runs up to approximately 25–50 feet depending on cable quality and resolution. The WolfPack 16×32 model transmits over CAT6 cabling for distances up to 450 feet per run. For longer distances with other fixed models, HDMI extenders can be added at each display.

What is the best HDMI matrix switcher for a sports bar?

For sports bars with up to 16 TVs, a WolfPack Fixed 16×16 HDMI Matrix Switcher is a popular choice — it handles 16 independent sources (cable boxes, satellite receivers, streaming devices) and routes any of them to any TV. For larger venues with 20–80+ TVs, HDTV Supply's WolfPack Modular Matrix Switchers or AV Over IP systems are typically the better fit. Call 833-WOLFPACK (833-965-3722) for a free consultation.

Need Help Choosing?

HDTV Supply has been helping AV integrators, sports bars, hotels, and homeowners select the right matrix switching system for 25 years. Call us at 833-WOLFPACK (833-965-3722) or email kent@hdtvsupply.com and we'll recommend the right unit for your source count, display count, resolution requirements, and control system.