This QSC CX-Q 4K4 4-Channel 1000W/CH Network Amplifier combine a legacy of robust power amplifiers, advancements in high-efficiency output devices and native network transport, control and monitoring capabilities. CX-Q 8K4 features four channels, capable of delivering customized power output loading and a total maximum power of up to 8000 W. Low-Z, 70 V or 100 V direct drive are available on all channels.
QSC CX-Q 4K4 4-Channel 1000W/CH Network Amplifier Features:
- Build for Q-SYS – Simple drag-and-drop integration into your Q-SYS design, enabling network routing, advanced processing and control.
- Legacy of power redefined – These network amplifiers are built with a 5th generation high-efficiency, Class-D hybrid powertrain design built upon the dependable PL380 PowerLight™ amplifier platform.
- Flexible & efficient channel power distribution – CX-Q Series network amplifiers feature FlexAmp™ and FAST (Flexible Amplifier Summing Technology™), which combine to provide extreme flexibility in output deployment.
- Routable input options – Four channels of mic/line inputs (with +12 V phantom power) for additional on-ramps into Q-SYS.
- PowerLight universal switchmode power supply with PFC for highest efficiency, improved audio performance and low weight
- Touch-proof Euroblock loudspeaker connections
- Eight bi-directional GPIO connections for further control and integration of third-party peripherals within Q-SYS
- Automatic energy saving modes ensure that the amplifier will draw the minimum amount of AC power while still providing outstanding audio quality
Why not buy this QSC CX-Q 4K4 4-Channel 1000W/CH Network Amplifier from HDTV Supply today?
QSC CX-Q 4K4 4-Channel 1000W/CH Network Amplifier Specifications:
| Typical distortion | ||
| 8Ω | 0.02 - 0.05% | |
| 4Ω | 0.04 - 0.1% | |
| Maximum distortion 4Ω - 8Ω | 1.0% | |
| Frequency response | 20 Hz - 20 kHz +0.2 dB / -0.7 dB | |
| Noise | ||
| Unweighted output muted | > 102 dB | |
| Weighted output muted | > 106 dB | |
| Gain (1.2V setting) | 35 dB | |
| Damping factor | > 100 | |
| Input impedance | > 8k balanced and > 4k unbalanced | |
| Amplifier and load protection | Short circuit, open circuit, over current, over voltage, thermal, RF, DC fault shutdown, active inrush limiting, on/off muting |
|
| AC power input | Universal power supply 100 - 240 VAC, 50 - 60 Hz | |
| Agency approvals | UL, CE, RoHS/WEEE compliant, FCC Class B (conducted and radiated emissions) | |
| Carton contents | IEC cable, quick start guide, Euro (green) connectors | |
| Controls and indicators (front) | Power • Channel MUTE buttons • Channel SELECT buttons • Channel Input Signal and CLIP LED Indicators Channel Output and LIMIT LED meters • NEXT, PREV, ID buttons • Control knob | |
| Controls and indicators (rear) | AC Power Disconnect (IEC C-14) | |
| Input connectors | "Q" models - 3-pin Euro (green) and Q-LAN Network connectivity "Qn" models - Q-LAN Network connectivity only |
|
| Output connectors | 8-pin Euro (green) | |
| Dimensions (H×W×D) mm | 89 × 482 × 406 | |
| Dimensions (H×W×D) in | 3.5 × 19 × 16 | |
| Weight net | 11.3 kg / 25 lb | |
| Weight shipping | 13.2 kg / 29 lb | |
