NTI ST-IPFO4K18GB-R-LC 4K 18Gbps HDMI Extender Over IP - Receiver

NTI

NTI ST-IPFO4K18GB-R-LC 4K 18Gbps HDMI Extender Over IP - Receiver
$485.00
Part Number:
ST-IPFO4K18GB-R-LC
Availability:
Usually ships the same day
1:
Zero Latency
2:
Bandwidth up to 600 Mhz
3:
HDCP 2.2 and 1.4 Compliant
4:
Built-in Default EDID Table
5:
Free USA Shipping
6:
2-Year NTI Warranty
ADD OPTIONS:
Make a Fair Offer
Ask an Expert

This NTI ST-IPFO4K18GB-R-LC 4K 18Gbps HDMI Extender Over IP via One LC Fiber Optic Cable - Receiver Extend an Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI display up to 24.8 miles (40 km) away from the source via fiber. Broadcast real-time HDMI signals to multiple display locations with a 10G SFP network switch.

The XTENDEX® 4K 18Gbps HDMI Extender Over IP via Fiber Optic Cable locates an Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI display, audio, IR, and RS232 up to 24.8 miles (40 kilometers) away from an HDMI source using a single LC singlemode fiber optic strand or 1,640 feet (500 meters) using LC multimode fiber optic cable.

Each 4K 18Gbps HDMI Extender Over IP consists of a local unit that connects to an HDMI source and a local display via the HDMI loop output, and a remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection via Fiber Optic Cable or a Point-to-Many connection via a 10G SFP network switch. Support for multiple transmitters requires a managed 10G SFP network switch.

NTI ST-IPFO4K18GB-R-LC 4K 18Gbps HDMI Extender Over IP via One LC Fiber Optic Cable - Receiver Features:

  • Signal transmission via single-strand LC fiber optic cable.
    • Using singlemode 9-micron cable, extend to 24.8 miles (40 km).
    • Using 50-micron OM2 (or better) multimode cable, extend to 1,640 feet (500 meters).
    • Zero latency.
  • Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @60Hz YUV 4:4:4, HDTV resolutions to 1080p @60Hz, and up to 1920x1200 (WUXGA).
  • Cascade network switches to extend the length longer distances.
    • Up to 12 switches can be cascaded.
  • HDMI features supported:
    • HDMI 2.0
    • 8-bit, 10-bit, and 12-bit Deep Color
    • Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, Dolby Digital+, Dolby Atmos, LPCM 7.1CH, DTS 5.1, and DTS:X
    • RGB, YCbCr 4:4:4, YCbCr 4:2:2, and YCbCr 4:2:0/li>
    • Bandwidth up to 600 Mhz (18Gbps)
    • 3D (1080p @60Hz)
    • Support for CEC (consumer electronic control) compatible devices.
    • HDR10
    • ARC
  • HDCP 2.2 and 1.4 compliant.
  • Supports local and remote HDMI displays.
  • For a point-to-many connection, a standalone network with an unmanaged 10G SFP network switch, hub, or router can be used instead of a managed SFP network switch.
    • Easily expandable. Add remote units as you add monitors.
      • Up to 255 receivers supported.
    • It is not recommended to use any other network devices on this standalone network as it may cause degradation in performance.
  • Support for multiple transmitters (many-to-many connection) requires a managed 10G SFP network switch with IGMP support and Jumbo frame support. Standard LAN switches can only support one transmitter.
    • The managed 10G SFP network switch must support port-based IEEE 802.1Q VLAN.
    • Each VLAN acts as a separate HDMI Over IP Channel on the network.
      • Each VLAN channel supports one transmitter.
    • The number of local and remote units that can be used is dependent on the backplane bandwidth of the switch.
  • Plug and play installation allows receivers to find the transmitters automatically on the same subnet.
  • Local and remote units must be in the same LAN. The units do not support WAN connections.
  • Built-in default EDID table.
  • Supports full-duplex RS232 up to 115200 baud.
  • Bi-directional IR control from input and output locations.
  • Supports HDMI embedded digital audio and ARC audio extraction via Toslink connection.
  • Built-in surge and ESD protection.
  • Mounting brackets included for easy surface/wall mounting.

Why not buy this NTI ST-IPFO4K18GB-R-LC 4K 18Gbps HDMI Extender Over IP via One LC Fiber Optic Cable - Receiver today?

NTI ST-IPFO4K18GB-R-LC 4K 18Gbps HDMI Extender Over IP via One LC Fiber Optic Cable - Receiver Specifications:

Local Unit

  • One female HDMI connector for source connection.
  • One female HDMI connector for local display.
    • Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @60Hz YUV 4:4:4, HDTV resolutions to 1080p @60Hz, and up to 1920x1200 (WUXGA).
    • Supports embedded digital audio.
  • Two 3.5mm ports connecting an IR emitter and receiver (included).
    • IR frequency range: 20 to 60 kHz.
  • 3-pin screw terminal for RS232.
    • Supports full-duplex RS232 up to 115200 baud.
  • One TOSLINK optical port for HDMI ARC audio extraction..
  • One simplex LC fiber optic port for sending/receiving video/audio, IR, and RS232 signals.
  • One female USB Micro Type B connector for firmware updates.
  • Supports HDCP 2.2 and 1.4.

Remote Unit

  • One female HDMI connector for display.
    • Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @60Hz YUV 4:4:4, HDTV resolutions to 1080p @60Hz, and up to 1920x1200 (WUXGA).
    • Supports embedded digital audio.
  • Two 3.5mm ports connecting an IR emitter and receiver (included).
    • IR frequency range: 20 to 60 kHz.
  • 3-pin screw terminal for RS232.
    • Supports full-duplex RS232 up to 115200 baud.
  • One TOSLINK optical port for SPDIF digital audio.
  • One simplex LC fiber optic port for sending/receiving video/audio, IR, and RS232 signals.
  • One female USB Micro Type B connector for firmware updates./li>
  • Supports HDCP 2.2 and 1.4.

Power

  • Local and remote unit:
    • Input: 100 to 240 VAC at 50 or 60Hz via AC adapter. (Country-specific power supplies included.)
    • Output:
      • US power supply: 5VDC, 2A
      • UK, EU, AUS power supplies: 5VDC, 3A
    • Power consumption:
      • Local unit: 4.6W
      • Remote unit: 4.1W

Dimensions

  • WxDxH (in): 4.88x4.54x1.18 (124x115x30 mm)

Environmental

  • Operating temperature: -4 to 140°F (-20 to 60°C).
  • Storage temperature: -22 to 158°F (-30 to 70°C).
  • Operating relative humidity: 0 to 90% non-condensing RH.

Max Distance

  • 24.8 miles (40 km) over 9μm singlemode LC fiber optic cable.
  • 1,640 feet (500 meters) over 50μm OM2 (or better) multimode LC fiber optic cable.

Cables

  • Interface cables between the source/display and the transmitter/receiver are required for proper operation.
    • Supports cable lengths to 20 feet for 4K resolutions and lengths to 50 feet for 1080p@60Hz using passive HDMI cables.
  • Use HD-xx-MM cable to connect an HDMI source or display.
  • Use HD-ACT-xx-MM 4K HDMI Active Cables to connect an HDMI computer up to 50 feet.
  • Use USB3C-HD4K-xx-MM to connect a 4K computer with USB Type C connector up to 10 feet.
  • Use DVI-HD-xM-MM to connect a DVI computer up to 5 meters.
    • Supports resolutions to 1080p.
  • Use a simplex LC singlemode 9-micron fiber optic cable to extend the receiver from the transmitter up to 24.8 miles (40 km).
    • Use FIBER-AD-SS-SCFLCM to convert a male simplex SC singlemode connector to a male simplex LC singlemode connector.
  • Use a simplex LC multimode 50-micron OM2 (or better) fiber optic cable to extend the receiver from the transmitter up to 1,640 feet (300 meters).
  • Cables not included.

Regulatory Approvals

  • CE, FCC, RoHS

Warranty

  • Two years.

Package Includes

  • One transmitter unit
  • One receiver unit
  • One T1270/R1330nm 10G Base-T SFP module
  • One T1330/R1270nm 10G Base-T SFP module
  • One IR emitter
  • One IR receiver
  • Two power supplies
  • Mounting brackets

Why not buy this NTI ST-IPFO4K18GB-R-LC 4K 18Gbps HDMI Extender Over IP via One LC Fiber Optic Cable - Receiver today?

NTI ST-IPFO4K18GB-LC Specifications

Why not buy this NTI ST-IPFO4K18GB-R-LC 4K 18Gbps HDMI Extender Over IP via One LC Fiber Optic Cable - Receiver today?