HDTV Supplys WolfPack™ Family of Modular HDMI Matrix Switchers is a pack of high performance video and audio modular HDMI matrix switchers that circle the competition to devour them. With various changeable input and output cards make the modular Matrix Switcher System extremely flexible, allowing it to be an all-in-one solution for a variety of different projects. It is designed so that it can support a variety of different video signals with cross switching which should make other manufactures howl with jealousy.
Because it is a HDMI matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs, or any combination. The WolfPack Modular Matrix system is designed to allow the switching and distribution of up to 32 source devices to up to 32 connected displays (model specific), either directly via HDMI and/or via CAT5e/6/7 inputs and outputs to compatible transmitters and/or receivers with many control options depending on the module configuration. In addition, this matrix also features IP control allowing users to access and control the matrix remotely and also allow additional options for integration of third-party control systems.
This WolfPack™ HDMI Matrix can be controlled 10-Ways by:
Up to 32 HDMI, DVI, CA T5e/6/7 or VGA source devices (dependent on module configuration) connected with appropriate cables
Up to 32 displays (TV or monitor) or AV receivers equipped with HDMI, DVI, CAT5e/6/7 connection (dependent on module configuration)
connected with appropriate cables
Also included is a DVI output for local monitoring of the output allowing installers to easily monitor,
test, and configure the Inputs and Outputs on installation
Industry standard CAT5e/6/7 cable (for CAT5e/6/7 inputs/outputs)
Compatible PoH HDBaseT™ Transmitters/Receivers for CAT5e/6/7
HDMI, HDCP 1.1 and DVI 1.0 compliant
Interchangeable input and output modules
Input and output module types can be mixed and added in multiples of (8) from 8x8 (1 Input module, 1 Output module) up to 32x32 (4 Input modules, 4 Output modules) with HDMI, DVI, CAT5e/6/7 and VGA (Input only) connection types
Supports a wide range of PC and HDTV resolutions from VGA to WUXGA and 480i to 1080p and 4K2K@24/25/30
Supports pass-through of LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
Supports control of the matrix via front panel, RS-232, Telnet and WebGUI controls and a remote control
Supports (10) available preset settings
Supports (3) EDID modes: Standard, Dynamic and Manual
Dual removal power supply units except the HDTVANIMODZ8)
Supports HDMI cable input lengths of up to ~50 ft/15M each way (1080p@8-bit resolution), ~33 ft/10M (1080p@12-bit resolution) or ~17 ft/5M (4K2K@30 resolution)
Supports CAT5e/6/7 cable output lengths of up to ~330 ft/100M (1080p@8-bit/12-bit resolution) or ~230 ft/70M (4K2K@30 resolution) dependent on board capabilities
HDBaseT™ 5Play™ convergence supports HD Video, HD Audio, PoC, Ethernet and IR/RS-232 Control
HDBaseT™ 4Play convergence supports HD Video, HD Audio, PoC and IR/RS-232 Control
Providing unparalleled levels of flexibility, with an advanced modular design these models can be setup in a wide variety of combinations allowing users the ability to tailor the Matrix to their requirements by simply adding or removing the input or output modules as required.
NOTE 1: The free WolfPack iOS and Android Control System downloadable Apps are from uses 3rd party Global Cache hardware which is not supplied and needs to be bought and installed by an experienced AV installer with Global Cache experience. Check their web site for an installer located near you.
The WolfPack Modular Matrix is supplied with dual removable internal power supply units (except HDTVANIMODZ8 which has only one Power Supply) which allow for maximum up time and maintenance. Also included is a DVI-D output for local monitoring of the output allowing you to easily monitor, test, and configure the Inputs and Outputs on installation. In addition, this matrix also features Web GUI control.
The WolfPack Modular Matrix Switcher comes in three different models, all of which provide the same basic functions. The input and output cards work with all of the modules. The major difference between these models is the number of card slots they provide.
There are multiple groups of interchangeable cards designed to work with the matrix; the Input cards series and the Output card series. All of these cards are designed to support hot plug & play and each of the above Modular Matrix Switchers can be used with any of the input and output cards for signal conversion.
The HDMI ports can be replaced by DVI, HDbaseT, VGA inputs and outputs...we can mix and match ports...it′s completely customizable.
Call us at 800-841-9238 configure a custom unit for you.
NOTE 2: This special order built matrix is not in stock as we custom build each unit. The unit has a three year warranty and is non-returnable and non-cancelable due to it being a custom built switcher. Also please call us for our payment methods before you place your order. HDBaseT transmitters and receivers are not interchangeable between manufacturers so call us at 800-841-9238 with your HDBaseT needs.
Wolfpack Transmitter and Receiver Options:
Wolfpack HDTVANI315XL Transmitter & Receiver: The HDMI Extender over single CAT5e/6 incorporates an IR and RS- 232 signal transfer for a more efficient system setup and is easy to install. Uncompressed video and audio can be transmitted to distances of up to 196 ft (60M) @1080p 115 ft (35M) @4K and supports High Definition Audio and 3D signals. Designed with HDBaseT™ technology for greater flexibility in custom installations with full HDMI and control signal transfer over a single CAT5e/6 cable.
Wolfpack HDTVANI605XPLBD Transmitter & Receiver: The HDBaseT-Lite™ HDMI over single CAT5e/6/7 with bidirectional IR, RS-232 & bidirectional PoC Transmitter and Receiver set can make your home or office set-up more efficient and easy to use.
Uncompressed video and audio can be transmitted up to 60M with the PoC function and added benefit of controls through the built- in RS-232 and IR ports. This family design of HDBaseT™ technology allows a full usage of HDMI and controls over CAT5e/6/7 cable.
Wolfpack HDTVANI705XBD Transmitter & Receiver: The HDMI over CAT5e/6/7 Transmitter and Receiver set can send uncompressed video/audio and IP data over an single run of CAT5e/6/7 cable up to 328 ft/100M. It has the added benefit of control through the built-in RS-232 pass-through and 2-way IR control and a LAN serving connection. Additionally, it has bidirectional Power over Cable (PoC or POE) functionality that allows for greater flexibility in installations.
Wolfpack HDTVANI705WPR Wall Plate Receiver: The CAT5e/6/7 over HDMI Wall-Plate Receiver can receive uncompressed audio/video over a single run of CAT5e/6/7 cable up to 100M with PoE, IR, RS-232 and LAN. of a data transmission rate of 100Mbps. A True HDBaseT 5Play™ solution to make your home or office more efficient and easy with control.
WolfPack HDMI Matrix Chassis Sizes:
HDTVANIMODZ8: 19 x 15 x ~4 inches - 1 input card slot & 1 output card slot with Single power supply
HDTVANIMODZ16: 19 x 19 x ~5.7 inches - 2 input card slots & 2 output card slots with Dual power supplys
ANI-MODZ32: 19 x 20 x ~9.2 inches - 4 input card slots & 4 output card slots with Dual supplys
Q: Can you help connecting the WEB GUI?
A: Power off matrix via front panel. Then remove the power cords. Connect a valid and know working Ethernet cable. Restore power. It is set to DHCP so if you have a DHCP server, it will obtain its IP address within 3 minutes
Q: Do you have Control4 drivers for your Wolfpack line of matrix switchers?
A: Yes, contact us at 800-841-9238 for more info. The matrices also support 3rd party SimpleControls iPad controls.
Q: What CATx HDMI receivers support remote IR?
A: Here they are:
HDTVANI605XPLBDR - HDMI CAT receiver at 60m 1080p, 35m UHD, 2-way IR, 24V or PoC
HDTV Supply includes a 3 Year Limited Warranty on this WolfPack Modular 4K HDMI Matrix Switcher. The warranty states that the WolfPack Modular 4K HDMI Matrix Switcher will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt & that the WolfPack Modular 4K HDMI Matrix Switcher will be free from defects in materials & workmanship under normal use. In order to get a warranty replacement for a defective item HDTV Supplys Support Team will verify the product is eligible for a warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included. HDTV Supply also may sell a 5 Year warranty for this product. Please go to 5 Year Extended Warranty to purchase it.
Ask a Question
Questions & Answers
Ask a question about the 4K WolfPackPlus Modular HDMI Matrix Switcher - Control4, iOS, Android & Simple Control or Call 833-WOLFPACK (833-965-3722)
How this Wolfpack HDMI Switcher from HDTV Supply differs from the rest of the worlds wolfs:
4K compliant for use now or in the future
Larger 8-port HDMI input and output cards allowing up to a 32x32 HDMI matrix
DVI output for local monitoring of the output allowing installers to easily monitor, test, and configure the Inputs and Outputs on installation and use
Dual power supplies on larger card cage models
Web GUI for control from almost any PC, MAC and other devices
Optional POE HDBaseT 8-port "input" and output boards
Optional 3rd party SimpleControls iPad control
Card cage design allowing swap out of 8x8 cards in case of a failure