Kramer PA-240NET 240W Networked Power Amplifier is a high-performance, selectable Hi-Z (70V/100V) or Lo-Z (4Ω/8Ω) power amplifier featuring balanced and unbalanced inputs, additional line-level output and Dante interface. This versatile amplifier features built-in DSP, auto-standby and maximum durability. PA-240NET is suitable for a vast range of AV installations.
Kramer PA-240NET 240W Networked Power Amplifier Features:
High-performance Amplifier - With built-in DSP and additional balanced stereo line-level output. PA-240NET features flat frequency response, unmatched sonic performance, excellent signal to noise ratio, and extraordinarily low distortion levels.
Adaptable to Any AV Installation - Switch between Lo-Z and Hi-Z to accommodate any type of loudspeaker installation. Select 1 Channel of 120W into a 70V/100V line or 2 channels of 60W into 4Ω/8Ω.
Easy, Scalable and Cost-Effective Dante Audio Networking - Dante makes networking any size audio installation easy by providing digital signal transmission over a local area network using standard Internet protocols. The unit is part of the expanding family of products that make up Kramer's Dante ecosystem. These products are fully compatible and integrate into any Dante-enabled system.
Individual Mix Per Output - Each output supports an independent input mix with master volume, 3-band parametric EQ, and selectable high-pass filter. Create one output mix and EQ settings suitable for the venue and another for recording or cascading more amplifiers, powered speakers or subwoofers according to any AV installation requirements.
Professional, Studio Grade Signal Conversion Technology - Includes the latest generation 32-bit advanced Digital Analog Converter architecture to achieve excellent dynamic performance and improved tolerance to clock jitter. Maintains the quality of the original audio signal with selectable sampling rates up to 96 kHz.
Durable and Reliable - PA-240NET is immune to failure. It includes layers of protection against over-current, DC voltage at the outputs, high frequency, and over-heating with intelligent, heat-sensitive fans for added protection.
Flexible Control Options - Control locally via RS-232 serial commands or remotely via embedded web pages over Ethernet.
Power Efficient - This super-efficient amplifier includes auto-standby for power saving and cost reducing operation. No need to rely on default auto-standby settings. Adjust your noise floor threshold based on exactly when your amplifier needs to go into sleep mode and when it needs to wake up.
Easy Installation - ½ 19" size enables mounting in a 1U rack space with the recommended rack adapter.
Why not buy this Kramer PA-240NET 240W Networked Power Amplifier today?
Kramer PA-240NET 240W Networked Power Amplifier Specification:
2 Channels, on a Dante™ Net: On an RJ-45 connector
1 Balanced Stereo Audio: +4dBu/10kΩ, on a 5 pin terminal block
1 Balanced Stereo Audio: Line level, on a 5-pin terminal block
1 Speaker: On a 4-pin large terminal block
1 Control via IP: On an RJ-45 connector
1 RS-232: On a 3-pin terminal block
Input Sensitivity: Full power @ 0.3V (-10dBV)
Output Power: 2 x 60W @ 4Ω or 8Ω, 1 x 240W @ 70V or 100V
Maximum Voltage Gain: 26dB SE / 32dB BTL
Dynamic Range: 119dB
Frequency Response: 20Hz to 20kHz @ +/-1dB
S/N Ratio: 80dB, 20Hz - 20kHz
Audio THD + Noise: THD+N (1kHz @ 1W) 0.003 %
Audio 2nd Harmonic: 0.08% @ 75W RMS @ 4Ω 6.67kHz
USER INTERFACE: Controls: Output volume attenuator, IP and RS-232
Source: Universal mains operational voltage 85V AC - 265V AC
Total System Efficiency: 89%
Operating Temperature: 0˚ to +40˚C (32˚ to 104˚F)
Storage Temperature: -40˚ to +70˚C (-40˚ to 158˚F)
Why not buy this Kramer PA-240NET 120W Networked Power Amplifier today?
Click Here for Product Warranty
Ask a Question
Questions & Answers
Ask a question about the Kramer PA-240NET 240W Networked Power Amplifier or Call 833-WOLFPACK (833-965-3722)
Reasons To Buy an Kramer Product
This product may be eligible to be purchased through the United States Governments SEWP program, similar to their GSA program.
The NASA SEWP (Solutions for Enterprise-Wide Procurement) provides the latest in Information and Communications Technology (ICT) and Audio-Visual (AV) products and services for all Federal Agencies and their approved contractors.
If you are a government agency and want to see whether HDTV Supply has this product in the SEWP database go to our our SEWP Contract Holder RedHawk IT Solutions, LLC to allow you to maybe order this product from the United States Governments SEWP program. It is very easy to place your order, go to the link above and enter HDTV Supply and there you will see a list of part numbers of what we currently have. If you do not see it than give us a call at 833-WOLFPACK (833-965-3722) and we may be able to enter it.
Our SEWP Contract Holder RedHawk IT Solutions partner has the following credentials:
Their SEWP Federal Contracts are:
SEWP Contract Number: NNG15SD38B
Group: Group B_SDVOSB
SEWP Contract Number: NNG15SD88B
Group: Group C
The SEWP Program Office manages a suite of government-wide IT products and services contracts that enable NASA and all Federal Agencies to achieve their missions and strategic initiatives by providing streamlined access to critical technologies and solutions. The Program provides best value for the Federal Government and American taxpayer through innovative procurement processes, premier customer service and outreach, acquisition insight, and partnership with Government entities and Industry.
For a complete listing of HDTV Supply products from us, or our other vendors, call 833-WOLFPACK (833-965-3722).
Kramer PA-240NET 240W Networked Power Amplifier
Scroll Left & Right To See 20 Of Your Recently Viewed Items Below