This Javelin JAV-PS-POE Mid-Span Power Supply for PoE is a 48 VDC mid-span power injector designed to send remote power to HDBaseT products that operate on IEEE 802.03af Power over Ethernet.
When placed within an HDBaseT transmission line, it allows either or both HDBaseT endpoint devices to be remotely powered.
The power supply features two power switches to selectively send power upstream or downstream.
The PS-POE is housed in a compact enclosure and can be conveniently placed anywhere between the transmitter and receiver.
The PS-POE is ideal for Atlona HDBaseT endpoint devices used with HDBaseT-equipped products that do not provide power, including projectors, switchers, or third-party endpoints.
Javelin JAV-PS-POE Mid-Span Power Supply for PoE Feature:
- Power supply for remotely powering devices on HDBaseTTM transmission lines
- Mid-span power supply
- Power switches for incoming and outgoing line
- Supports 4K/UHD signals
- Upgrade for legacy PoCc systems
- Low-profile, discreet enclosure
Why not buy this Javelin JAV-PS-POE Mid-Span Power Supply for PoE from HDTV Supply today?
Javelin JAV-PS-POE Mid-Span Power Supply for PoE Specifications:
- Buttons and Indicators
- Switches: ON/OFF: 2 – Slide switches
- Indicators: PoE: 1 – LED, red
- Connectors
- HDBaseT IN: 1 – RJ45
- HDBaseT OUT: 1 – RJ45
- DC 48V IN: 1 – Euroblock, 2-pin
- Environmental
- Operating Temperature: +32 to +122°F / 0 to +50°C
- Storage Temperature: -4 to +140°F / -20 to +60°C
- Operating Humidity (RH): 20% to 90%, non-condensing
- Power
- Consumption: Max: 15.2 W
- External Power Supply: Input: 100–240 V AC, 50/60 Hz; Output: 48 V / 0.83 A DC
- Dimensions
- Unit: 0.96 x 2.89 x 2.77" / 24 x 73 x 70 mm
- Power Supply (AT-PS-54-L): 1.42 x 1.81 x 4.41" / 36 x 46 x 112 mm
- Weight
- Device: 0.09 lbs / 0.19 kg
- Certifications
- Device: CE, FCC
- Power Supply: CE, FCC, Level VI, RoHS, cULus, RCM, CCC
Why not buy this Javelin JAV-PS-POE Mid-Span Power Supply for PoE from HDTV Supply today?
Javelin JAV-PS-POE User Manual
Why not buy this Javelin JAV-PS-POE Mid-Span Power Supply for PoE from HDTV Supply today?
What is the Javelin JAV-PS-POE?
A: It is a 48VDC mid-span power injector designed to provide IEEE 802.3af PoE to compatible HDBaseT and networked AV endpoints.
It is installed in the transmission path when upstream equipment does not provide the required remote power.
What PoE standard does it support?
A: It supports IEEE 802.3af Power over Ethernet.
Compatible endpoints can receive power through the structured connection instead of requiring a local power supply.
What input voltage does it use?
A: The unit uses a 48VDC input for its PoE injection function.
The supplied DC power is delivered through the compatible PoE transmission path to the endpoint.
Can it power HDBaseT devices?
A: Yes, it is designed to provide remote power to compatible HDBaseT products supporting the required PoE method.
It can be useful with projectors, switchers, transmitters, receivers, and other compatible AV endpoints.
Does it control power direction?
A: Yes, two slide switches allow selective control of incoming and outgoing power.
This provides installation flexibility when the power requirement differs between the two sides of the HDBaseT link.
What connectors are provided?
A: It provides HDBaseT IN and OUT RJ45 ports plus a 48VDC two-pin Euroblock input.
The arrangement allows the injector to be inserted directly between the source-side and destination-side HDBaseT devices.
Can it be placed mid-span?
A: Yes, it is specifically designed as a mid-span power supply and can be placed between transmitter and receiver.
This lets installers locate the power source where AC access is convenient rather than at the endpoint.
Does it support 4K/UHD signals?
A: Yes, it is designed to add power while supporting compatible 4K/UHD HDBaseT signal transport.
The device provides power injection without replacing the AV signal path with a separate connection.
Can it upgrade legacy installations?
A: Yes, it can serve as an upgrade for compatible legacy PoC installations that lack the required power capability.
This can add remote powering without replacing an otherwise functional HDBaseT AV system.
Where is it used?
A: It is useful in conference rooms, classrooms, corporate AV, digital signage, and other HDBaseT installations.
Its compact mid-span architecture is useful when remote endpoint power must be added to an existing structured-cabling path.
