This Javelin JAV-OCS-900N Network-Enabled Occupancy Sensor is a network-enabled multi-function sensor designed for use in a wide variety of AV automation applications.
This ceiling mounted sensor uses passive infrared (PIR) technology to detect occupancy in the coverage area.
The OCS-900N utilizes an IP network to communicate with select Atlona products or our Velocity system to automatically control AV components based on whether the space is occupied.
It comes with two lenses that cover approximately 900 ft2 (83.6 m2) or 2,000 ft2 (185.8 m2) depending on ceiling height.
A blinder insert is included that limits the sensor’s field of view, preventing detection in unwanted areas such as doorways or windows with heavy cross traffic.
Installation is simplified by Power over Ethernet (PoE), that provides both communications and power over a single cable as well as spring-loaded clamps that secure the sensor to a ceiling tile.
In addition to occupancy, the OCS-900N also captures temperature and ambient light level information.
Its open standard design allows sensor information to be communicated to third-party ventilation, lighting, and other systems over TCP/IP using common protocols such as UDP, TCP, WebSocket, and MQTT.
Javelin JAV-OCS-900N Network-Enabled Occupancy Sensor Feature:
- Multi-function sensor that detects occupancy, temperature, and ambient light level
- IP-enabled for communicating state information over Ethernet
- Works with WAVE™, Velocity™, and Omega™ products to automate system operation
- Supports network communications with third-party devices using common protocols
- Customizable detection area covering from 900 ft2 (83.6 m2) – 2,000 ft2 (185.8 m2)
Why not buy this Javelin JAV-OCS-900N Network-Enabled Occupancy Sensor from HDTV Supply today?
Javelin JAV-OCS-900N Network-Enabled Occupancy Sensor Specifications:
- Motion Sensor
- Detection: PIR (Passive Infrared)
- Coverage Area: 900 ft² (83.6 m²), 2000 ft² (185.8 m²) with accessory lens
- Coverage Pattern: 360°
- Ambient Light Sensor
- Range: 0 to 65535 lux
- Color Spectrum: RGBW, 16-bit
- Temperature Sensor
- Range: -40 to +257°F
- Measurement System: Celsius, Fahrenheit, ADC
- Ethernet
- Port: 1 x RJ45
- Standards and Protocols: MQTT, JSON over WebSocket, mDNS, HTTP/TLS, TCP, UDP
- Speeds: 10/100 Mbps
- Addressing: DHCP, Static
- LED Indicators: Motion Detection
- Connectors
- LAN: 1 – RJ45, female
- Environmental
- Operating Temperature: +32 to +122°F
- Storage Temperature: -40 to +158°F
- Humidity (RH): 90% (maximum), non-condensing
- Power
- Consumption: 1.1 W
- PoE: 802.3af
- Dimensions
- Unit: 2.13 x 2.90" (H x Dia.)
- Weight
- Device: 2.11 oz
- Certification
- Device: CE, FCC, UL 916 file no. #E524557, UKCA
- Compliance
- NDAA-899: Yes
Why not buy this Javelin JAV-OCS-900N Network-Enabled Occupancy Sensor from HDTV Supply today?
Javelin JAV-OCS-900N User Manual
Javelin JAV-OCS-900N Datasheet
Why not buy this Javelin JAV-OCS-900N Network-Enabled Occupancy Sensor from HDTV Supply today?
What is the Javelin JAV-OCS-900N?
A: It is a network-enabled multi-function occupancy sensor for AV automation and building-control applications.
It uses PIR occupancy detection and also reports temperature and ambient-light information over IP.
How does it detect occupancy?
A: It uses passive infrared (PIR) technology to detect occupancy in the configured area.
PIR provides room-state information without using a camera-based people-counting system.
What area can it cover?
A: The sensor supports approximately 900 square feet or 2,000 square feet depending on lens and ceiling height.
Actual coverage depends on installation height, lens selection, room geometry, and the desired detection zone.
Does it measure temperature?
A: Yes, temperature is captured in addition to occupancy status.
Temperature information can be used by compatible automation or building-management systems.
Does it measure ambient light?
A: Yes, ambient light level is another sensor measurement.
Lighting information can be incorporated into automation logic for displays, lighting, and room-state control.
How does it communicate?
A: It uses Ethernet/IP and supports protocols including UDP, TCP, WebSocket, and MQTT.
This open communication approach allows integration with compatible AV and third-party automation systems.
Does it use PoE?
A: Yes, Power over Ethernet provides both network communication and power through one cable.
PoE simplifies ceiling installation by removing the need for a separate local power adapter.
Can the detection zone be limited?
A: Yes, a blinder insert can restrict the field of view and prevent unwanted detection.
This is useful for avoiding false triggers caused by doorways, windows, or adjacent traffic areas.
Can it integrate with AV control?
A: Yes, it can communicate with compatible Atlona and Velocity AV-control systems.
Occupancy status can be used to automate supported display and room-equipment behavior.
Where is it used?
A: It is suitable for conference rooms, classrooms, huddle spaces, offices, and automated AV environments.
Its combined occupancy, temperature, light, IP, and PoE functions make it useful for intelligent room automation.
