Intelix INT-HDXL100-RX 150M Slim HDMI & HDBaseT Extender - Receiver

Intelix

Price: $105.34
Today's Price: $94.81
Part Number:
INT-HDXL100-RX
UPC:
663647964090
Availability:
Usually ships the same business day
1:
Built-in surge protection and diagnostic LEDs
2:
Power over HDBaseT (PoH), Bidirectional IR and RS232
3:
Free Shipping & Free 2-Year Intelix Warranty
4:
Free Lifetime Telephone, CHAT, TEXT, FAX & Email Tech Support
Intelix INT-HDXL100-RX 150M Slim HDMI, IR, RS232 and Ethernet HDBaseT Extender - Receiver

Intelix INT-HDXL100-RX 150M Slim HDMI, IR, RS232 and Ethernet HDBaseT Extender - Receiver extends HDMI over a single solid core shielded Category 5e or greater cable using the Valens VS100RX HDBaseT chip. The INT-HDXL100-RX supports 1080p video signals up to 150 meters (492 feet) including multichannel audio and HDCP 1.4/2.2. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Key features of the new extender series include , power over HDBaseT (PoH), bidirectional IR, bidirectional RS232, and Ethernet pass-through with a 2-port network switch.

Flexible power design allows the INT-HDXL100 series extenders to be powered at either the TX or RX end, and only one power supply is required. The power supply is included with the extender. The bidirectional wideband IR, bidirectional RS232, and Ethernet pass-through capabilities make the INT-HDXL100 compatible with most control systems. The IR emitter (DIGIB-EMT) and IR receiver (DIGIB-EYE) are sold separately. The two-port network switch on the INT-HDXL100-RX allows a second device to share the 100BaseT Ethernet pass-through connection without adding additional hardware to the installation.

The INT-HDXL100 series extenders are only compatible with other HDBaseT devices that operate in Long Reach mode, such as INT-HDXL100 and DIGI-HDXL series products by Intelix.

Intelix INT-HDXL100-RX 150M Slim HDMI, IR, RS232 and Ethernet HDBaseT Extender - Receiver Features:

  • Extend HDMI over a single solid core shielded Category 5e or greater cable using the Valens VS100TX HDBaseT chip
  • Supports 1080p video signals including multichannel audio and HDCP 1.4/2.2
  • Support signals up to 150 meters (492 feet)
  • Built-in surge protection and diagnostic LEDs
  • Power over HDBaseT (PoH)
  • Bidirectional IR
  • Bidirectional RS232
  • Ethernet pass-through
  • 2-port network switch

Why not buy this Intelix INT-HDXL100-RX 150M Slim HDMI, IR, RS232 and Ethernet HDBaseT Extender - Receiver today?

Intelix INT-HDXL100-RX 150M Slim HDMI, IR, RS232 and Ethernet HDBaseT Extender - Receiver

  • Input/Output Connections
    • HDMI Output: One (1) HDMI Type A Receptacle
    • HDBaseT Port: One (1) 8P8C port (Shielded RJ45)
    • Ethernet: Two (2) 8P8C port (Shielded RJ45)
    • Power: One (1) 5.5 mm OD, 2.6 mm ID Threaded Barrel
    • RS232 Port: One (1) 3-pin Removable Terminal Block Connector
    • IR Input: One (1) 3.5 mm TRS Receptacle
    • IR Output: One (1) 3.5 mm TRS Receptacle
  • Supported Audio, Video and Control
    • Video Resolutions
      • SMPTE: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
      • VESA: Resolutions up to 1920x1200
      • Color Depth: 24, 30, 36 bit
    • Maximum Video Compatibility at 150 m: Deep Color 36/30/24 Bit at 1080p
    • Video Compliance: HDMI 1.4 and HDCP 1.4/2.2
    • Embedded Audio: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
    • ARC (Audio Return Channel): No
    • HEC (HDMI Ethernet Channel): No
    • CEC (Consumer Electronics Control): Yes (Pass-through Only)
    • Supported Baud Rates: 2400, 4800, 9600, 19200, 38400, 57600, 115200
    • Supported IR Carrier Frequencies: 33 to 55 kHz
    • Ethernet: 100BaseT
  • HDBaseT Signal Characteristics
    • Maximum Distance: 150 m (492 ft)
    • Cable Requirements: Continuous shielded solid core Cat 5e or greater with TIA/EIA-568B crimp pattern (no couplers in-line)
    • Bandwidth: 10.2 Gbps
    • HDBaseT Chipset: VS100RX with Long Reach Mode enabled
  • Chassis and Environmental
    • Construction: Black Alumininum
    • Dimensions (H x W x D): 16.2 mm x 152 mm x 84 mm (0.64 in x 5.98 in x 3.31 in)
    • Operating Temperature: 0? to +40? C (+32? to +104? F)
    • Operating Humidity: 20% to 90%, Non-condensing
    • Storage Temperature: -10? to +60? C (+14? to +140? F)
    • Storage Humidity: 20% to 90%, Non-condensing
  • Power and Regulatory
    • Power Input: 24V DC 1.25A or 48V DC PoH (Power over HDBaseT)
    • Power Output: 48V DC PoH (Power over HDBaseT)
    • Power over Ethernet (PoE) Compatibility: 802.3af Alternative A
    • Power Consumption: 5 watts
    • ESD Protection: 15kV air, 8kV contact
    • Regulatory: FCC, CE, RoHS
  • Other
    • Warranty: 2 years
    • Diagnostic Indicators: HDCP, Link, and Power
    • Included Accessories: Installation Guide, power pupply, 3-pin removable screw terminal, mounting brackets with screws
    • Optional Accessories: IR emitter (DIGIB-EMT), IR receiver (DIGIB-EYE), rack mount (INT-EXRMK), rack mounted power supply (PSU12)
    • HDBaseT Transmitter (A/V, PoE, Control) Compatibility: DIGI-HDXL-S, INT-HDXL100-TX
    • HDBaseT Transmitter (A/V, Control) Compatibility: FLX-BO4A-XL