Intelix INT-BSR4K-H2 HDBaseT 4K60 scaling receiver W/PoE, Audio-De-Embed
is an HDMI 2.0 and HDCP 2.2 compliant HDBaseT scaling 4K receiver that distributes uncompressed 4K@60Hz UHD video, digital coax / analog stereo audio, Ethernet, RS232 and bi-directional IR up to 100m/330ft over a single category cable. The INT-BSR4K-H2 can be controlled by telnet or RS232 but also can also store and pass display commands via RS232 as well as generate CEC display ON and OFF commands.
The two-port network switch on the INT-BSR4K-H2 allows a second device to share the 100BaseT Ethernet pass-through connection without adding additional hardware to the installation. The INT-BSR4K-H2 requires local power, however it can provide power to a compatible Intelix HDBaseT transmitter.
The INT-BSR4K-H2 is compatible with all Intelix HDBaseT product offerings and any product that meets the HDBaseT specifications.
Intelix INT-BSR4K-H2 HDBaseT 4K60 scaling receiver W/PoE, Audio-De-Embed Features:
- HDBaseT Scaling Receiver
- Built‐in scaling up to 4k@60Hz / 4:2:0 / 8 bit deep color
- Up/Down Scaling ability
- 100 meter max distance
- PoE powers the remote transmitter
- PCM SPDIF and analog audio de‐embedding
- Compatible with all Intelix HDBaseT products
- Affordable way to scale HDBaseT signals to match your display needs
- Passes 2 way IR, RS232, Ethernet for control
- Can store and generate display RS232 / CEC commands with active signal
- Up & Downscaling ability removes the lowest common resolution concern
- Commercial, residential, education, and any other application for video or presentations
Why not buy this Intelix INT-BSR4K-H2 HDBaseT 4K60 scaling receiver W/PoE, Audio-De-Embed today?
Intelix INT-BSR4K-H2 HDBaseT 4K60 scaling receiver W/PoE, Audio-De-Embed Specification:
- Video
- Video Output: (1) HDMI
- Video Output Connector: (1) HDMI type A
- Output Video Signal: HDMI
- Output Resolutions Supported
- SMPTE: 4096 x 2160@24/30/60 (YUV4:2:0); 3840 x 2160@24/30/60 (YUV4:2:0); 1920 x 1080@60; 1280 x 720@60; 720 x 576p@60; 720 x 480p@60
- VESA: 1920 x 1200@60; 1680 x 1050@60; 1600 x 1200@60; 1600 x 900@60; 1440 x 990@60; 1366 x 768@60@60; 1360 x 768@60; 1280 x 1024@60; 1280 x 960@60; 1280 x 800@60; 1280 x 768@60; 1024 x 768@60; 800 x 600@60
- Standards: Compliant with HDMI 2.0 & HDCP2.2
- Audio
- Supported output formats: Analog and Digital: PCM 2.0
- Audio Outputs: Stereo analog and digital coax
- Audio Output: Connectors
- Analog: (1) 3 Pin phoenix
- Digital: (1) Digital S/PDIF Coax
- Audio Output Impedance: 70 Ohms
- Frequency Response: 20Hz~20K Hz
- CONTROL
- Control Port / Connector
- (2) LAN / RJ45
- (1) RS232 / 3 pin phoenix
- Other
- System Bandwidth: 9Gbps
- Transmission Distance
- 1080p 100m / 330' or less when using Cat6 F/UTP, 4K 70m or less when using Cat6 F/UTP
- 1080p 100m / 330' or less when using Cat6A F/UTP, 4K 100m or less whenusing Cat6A F/UTP
- Operating Temperature: 0 ~ +45 C (32 to + 113 ˚F)
- Storage Temperature: -20 to +70˚C (-4 to + 158 ˚F)
- Humidity: 10% ~ 90%
- Power Supply: DC12V 3A
- Power Consumption: 16.4w
- Dimension (W*H*D) : 234.4. mm x 25mm x 143mm 9.2" x 1" x 5.6"
- Weight: 0.9kg / 1.9 lbs