Intelix INT-66HDX 6x6 HDBaseT Matrix 100M, 4K, HDCP 2.2 And POH is a six input by six output HDBaseT/HDMI matrix switcher with HDCP 2.2 and 4K/30 video support. The matrix features advanced EDID and HDCP handling, including the ability to turn input HDCP compliance ON and OFF to ensure maximum functionality with a wide range of sources.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 833-WOLFPACK (833-965-3722) right now to discuss your needs.
The INT-66HDX features HDBaseT twisted pair extension for each output, and simultaneous HDMI on the first three outputs, allowing the same signal to be routed to the HDMI connector and a remote destination with an HDBaseT receiver. The HDBaseT ports support up to 4K/30 HDMI video with audio, bidirectional wide-band IR, matrix control via IR, RS232 tunneling, and HDCP (1.4 and 2.2) up to 100 meters (328 feet). Each HDBaseT output port supplies power to the attached extender, eliminating the need for a power supply at the display end. Each output features analog stereo audio de-embedding and coaxial multichannel audio de-embedding for connection to amplifiers or DSPs.
The INT-66HDX can be controlled via front panel buttons, front panel IR, external IR, remote IR through HDBaseT extenders, RS232, and Ethernet. The matrix includes a simple IR remote control to allow IR switching. This IR remote control can be learned into universal remotes and IR based control systems. An IR All In port is provided, which allow one IR connection to control all four remote displays.
The matrix also features a full command set for RS232 and Ethernet control with third party control systems, plus control via a web browser. RS232 commands to remote displays can either be tunneled directly to the displays or be embedded in the control stream through the matrix from both the RS232 and Ethernet control ports, which will reduce the number of serial ports required for the control system.
Cable Requirements: Continuous shielded solid core Cat 5e or greater with TIA/EIA-568B crimp pattern (no couplers in-line)
Bandwidth: 10.2 Gbps
HDBaseT Chipset: VS100TX
Device Control Parameters
IR Carrier Frequency Range: 33-55kHz at 5 volts
RS232 Baud Rate: 9600 baud
Chassis and Environmental
Enclosure: Painted Aluminum
Dimensions (H x W x D): 88 mm x 437 mm x 380 mm (3.46 in x 17.20 in x 14.96 in) - 2 RU
Shipping Weight: 7.25 kg (16 lbs.)
Operating Temperature: 0˚ to +48˚ C (+32˚ to +120˚ F)
Operating Humidity: 10% to 90%, Non-condensing
Storage Temperature: -20˚ to +70˚ C (+14˚ to +158˚ F)
Storage Humidity: 10% to 85%, Non-condensing
Power, ESD, and Regulatory
Power Supply: 100V-240VAC / 50-60 Hz
Power over Ethernet (PoE) Compatibility: 802.3af Alternative A, 15 watts per port, 48V available at remote device
Power Consumption: 105 watts (max)
ESD Protection: 15kV air, 8kV contact
Product Regulatory: UL, FCC, CE, RoHS
Standard Warranty: 2 years
Diagnostic Indicators: Power LED, System LCD
Included Accessories: Installation Guide, IR Remote with AAA Batteries, IR Eye, Rack Mounting Ears with Screws, Chassis Feet with Screws, US Power Cable, Straight-Through DE9 Male to Female RS232 Cable, Twelve (12) 3-pole Removable Terminal Blocks
Compatible Receivers (AV and Power): DIGI-HD60-R (70m)