Intelix DIGI-P52-BSTK 5x2 Presentation Switcher Specification:

Input Connections
HDMI Inputs	Three (3) HDMI type A
VGA Inputs	Two (2) HD15-F
Analog Audio Inputs	Five (5) 3-Pole/3.5mm Euroblock
Microphone Input	One (1) 3-Pole/3.5mm Euroblock
Control (Front Panel)	Push Button
Control (Rear Panel)	RS232 via 3-Pole/3.5mm Euroblock, RS232 via HDBaseT Output (8P8C-F), IR via 3.5 mm TRS
12V DC Power	One (1) Threaded Barrel (5.5 mm OD; 2.6 mm ID)
Firmware Upgrade	USB Type A Female
IR Input	One (1) 3.5 mm jack (TRS)
Output Connections
HDMI Output	One (1) HDMI type A
Stereo Analog Audio	One (1) 3-Pole/3.5mm Euroblock
HDBaseT Output	One (1) 8P8C-F
IR Outputs	Five (5) 3.5 mm jack (TS)
Video Performance
HDMI Input Bandwidth	4.95Gbps (1.65Gbps per color)
HDMI Input Resolutions	640x480: 60/72/75/85 Hz, 800x600: 56/60/72/75/85 Hz, 1024x768: 60/70/75/85 Hz, 1280x768: 60 Hz, 1280x1024: 60/75Hz, 1360x768: 60 Hz, 720x480i/p (4:3 and 16:9), 720x576i/p (4:3 and 16:9), 1280x720p: 50/60 Hz, 1360x768: 60Hz, 1440x900: 60 Hz, 1600x1200: 60 Hz, 1680x1050: 60 Hz, 1920x1080i: 25/30 Hz, 1920x1080p: 50/60 Hz, 1920x1200: 60 Hz
HDMI Input Compatibility	HDMI 1.3, DVI-D
HDMI Input Compliance	HDCP Compliant
VGA Input Bandwidth	375MHz
VGA Input Resolutions	640x480: 60/72 Hz, 720x400: 60 Hz, 800x600: 60/72/75 Hz, 1024x768: 60/70/75 Hz, 1280x720: 60 Hz, 1280x768: 60Hz, 1280x960: 60 Hz, 1280x1024: 60/75Hz, 1360x768: 60Hz, 1440x900: 60 Hz, 1600x1200: 60 Hz, 1680x1050: 60 Hz, 1920x1080: 60 Hz, 1920x1200 60 Hz
VGA Input Video Impedance	75ohm
VGA Input Maximum Pixel Clock	145MHz
VGA Input Video Gain	0dB
VGA Input Signal Level	0.5V~2.0Vp-p
Output Resolutions	1920x1200, 1920x1080 (1080p), 1600x1200, 1360x768, 1280x720 (720p), 1280x800, 1024x768
Audio Performance
Analog Input Signal Level	-10dBv Nominal
Analog Input Impedance	>10k ohm
MIC Input Signal Level	-48dB Nominal (Mic input), +4dBu Nominal (Line Input)
MIC Input Impedance	600 ohm (Mic input), >10k ohm (Line input)
ADC Format	24bit, 48kHz, 2ch LPCM
Line Level Output Impedance	50 ohm
Frequency Response	20Hz-20kHz
Stereo Channel Separation	>80dB @ 1kHz
Common Mode Rejection	>90dB @ 20Hz-20kHz
Control Parameters
RS232	9600 baud
HDBaseT Signal Characteristics
Maximum Distance	60m
Cable Requirements	Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
Bandwidth	10.2 Gbps
Gain	0 dB - 10 dB at 100 MHz
Signal to Noise Ratio (SNR)	> 70 dB at 100 MHz over 100 m
Return Loss	< -30 dB at 5 KHz
Total Harmonic Distortion (THD)	< 0.005% at 1 KHz
Min-Max Signal Level	< 0.3 V - 1.45 Vp-p
Differential Phase Error	±10˚ at 135 MHz over 100 m
Chassis and Environmental
Enclosure	Painted Aluminum
Dimensions	44 mm x 220 mm x 148 mm (1.73 in x 8.66 in x 5.83 in) - 1RU
Shipping Weight	0.67 kg (1.48 lbs.)
Operating Temperature	0˚ to +48˚ C (+32˚ to +120˚ F)
Operating Humidity	10% to 90%, Non-condensing
Storage Temperature	-20˚ to +70˚ C (+14˚ to +158˚ F)
Storage Humidity	10% to 85%, Non-condensing
Power and Regulatory
PoE Standard (HDBT/PoE port) to extender	802.3af
Power Supply Input	100V-240VAC / 50-60 Hz / 0.8A
Power Supply Output	12VDC / 2.0A
Power Consumption	24 watts (max)
ESD Protection	±15 kV
DIGI-P52 Regulatory	FCC, CE, RoHS
Power Supply Regulatory	UL, CUL, CE, PSE, GS, RoHS
Regulatory	CE, RoHS
Other
Warranty	2 years
Included Accessories	IR Remote, IR Receiver, Wall Mount Power Supply, Power Supply Adapters (US, EU, UK, AU), Four (4) Rubber Feet, Serial Cable (DE9-F to Euroblock), Seven (7) 3-Pole/3.5mm Euroblock Connectors (installed on product), Two (2) FLX-RBOCA Cables (40 mm (15.75 in.) Male HD15 to Three (3) Female RCA Connectors (Red, Green, Blue)), Two (2) Mounting Rails with Chassis Screws, Installation Guide
Compatible Receivers (A/V Only)	DIGI-HD70-R
Compatible Receivers (A/V and Control)	DIGI-HDE-R, FLX-BI4
Compatible Receivers (A/V and PoE)	DIGI-HD60-R
Compatible Receivers (A/V, Control and PoE)	DIGI-HDX-R, DIGI-HD60C-R
Optional Accessories (sold separately)	IR Transmitter (DIGIB-EMT)

Why not buy this Intelix DIGI-P52-BSTK 5x2 Presentation Switcher today?

Intelix DIGI-P52-BSTK Installation Guide

Intelix DIGI-P52-BSTK Specification

Why not buy this Intelix DIGI-P52-BSTK 5x2 Presentation Switcher today?

This product may be eligible to be purchased through the United States Governments SEWP program, similar to their GSA program.

The NASA SEWP (Solutions for Enterprise-Wide Procurement) provides the latest in Information and Communications Technology (ICT) and Audio-Visual (AV) products and services for all Federal Agencies and their approved contractors.

If you are a government agency and want to see whether HDTV Supply has this product in the SEWP database go to our our SEWP Contract Holder RedHawk IT Solutions, LLC to allow you to maybe order this product from the United States Governments SEWP program. It is very easy to place your order, go to the link above and enter HDTV Supply and there you will see a list of part numbers of what we currently have. If you do not see it than give us a call at 833-WOLFPACK (833-965-3722) and we may be able to enter it.



Our SEWP Contract Holder RedHawk IT Solutions partner has the following credentials:

• DUNS: 801957023
• TIN: 260452583
• CAGE: 4TBM6

Their SEWP Federal Contracts are:

• SEWP Contract Number: NNG15SD38B
• Group: Group B_SDVOSB
• NAICS: 541519

and

• SEWP Contract Number: NNG15SD88B
• Group: Group C
• NAICS: 541519

The SEWP Program Office manages a suite of government-wide IT products and services contracts that enable NASA and all Federal Agencies to achieve their missions and strategic initiatives by providing streamlined access to critical technologies and solutions. The Program provides best value for the Federal Government and American taxpayer through innovative procurement processes, premier customer service and outreach, acquisition insight, and partnership with Government entities and Industry.

For a complete listing of HDTV Supply products from us, or our other vendors, call 833-WOLFPACK (833-965-3722).