Intelix DIGI-88B-B STK HDMI/HDBaseT Matrix Switcher - 8 Input x 8 Output Specification:

• I/O Connections
• HDMI Inputs: Eight (8) HDMI Type A Receptacle Connector (1 per input)
• HDMI Outputs: Eight (8) HDMI Type A Receptacle Connector (1 per output)
• HDBaseT Outputs: Eight (8) 8P8C port (Shielded RJ45) (1 per output)
• IR Input: Eight (8) 3.5 mm jack (TRS) (1 per input)
• IR Output: Eight (8) 3.5 mm jack (TS) (1 per output)
• AC Power Inlet: IEC C14
• Control, Rear Panel: RS232 via DE-9, RS485 via 8P8C, TCP/IP via 8P8C, IR via 3.5mm TRS
• Control, Front Panel: Push Button, IR
• DIP Switch: Four switch DIP
• Supported Audio, Video, and Control
• HDTV Video Resolutions: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
• VESA Video Resolutions: Up to 1920x1200
• Maximum Video Compatibility at 70 m: Deep Color 36/30/24 Bit at 1080p
• Maximum Video Compatibility at 40 m: Deep Color 48 Bit at 1080p and 3D
• Supported 3D Formats: Field Alternative (interlaced), Frame Packing, Line Alternative Full, Side-By-Side Half, Side-By-Side Full, 2D + Depth, 2D + Depth + Graphics + Depth
• DIP Switch Modes: 1080i/2.0, 1080p 3D/2.0, 1080p/2.0, 1080p/5.1, 1080p/7.1, Copy and Use EDID from Display
• Video Compliance: HDMI, HDCP, and CEC (Consumer Electronics Control)
• Embedded Audio: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
• Input DDC Signal: 5.0 volts p-p (TTL)
• Input Video Signal: 0.5 to 1.0 volts p-p
• IR Carrier Frequency Range: 33-55kHz at 5 volts
• Ethernet: 100BaseT
• RS232 Baud Rate: 9600 baud
• HDBaseT Signal Characteristics
• Maximum Distance: 70 m
• Cable Requirements: Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
• Bandwidth: 10.2 Gbps
• Gain: 0 dB - 10 dB at 100 MHz
• Signal to Noise Ratio (SNR): > 70 dB at 100 MHz over 100 m
• Return Loss: < -30 dB at 5 KHz
• Total Harmonic Distortion (THD): < 0.005% at 1 KHz
• Min-Max Signal Level: < 0.3 V - 1.45 Vp-p
• Differential Phase Error: ±10˚ at 135 MHz over 100 m
• Chassis and Environmental
• Enclosure: Painted Steel
• Dimensions: 440 mm x 340 mm x 100 mm (17.32 in x 13.4 in x 3.91 in):
• Rack Spacing: 2 RU
• Shipping Weight: 6.85 kg (15.1 lbs)
• Operating Temperature: 0˚ to +40˚ C (+32˚ to +104˚ F)
• Operating Humidity: 20% to 90%, Non-condensing
• Storage Temperature: -10˚ to +60˚ C (+14˚ to +140˚ F)
• Storage Humidity: 20% to 90%, Non-condensing
• Power, ESD, and Regulatory
• Power Supply Input: 100-240VAC
• Power Consumption: 70 watts (max)
• ESD Protection: 15kV
• Regulatory: CE, RoHS
• Other
• Warranty: 2 years
• Diagnostic Indicators: LCD output status and power LEDs
• Included Accessories: Installation Guide, IR Remote, IR Emitter (8 ea), IR Receiver (8 ea), USB/RS232 adaptor, US Power Cable, Mounting Brackets with screws, Chassis Feet
• Compatible Receivers (A/V Only): DIGI-HD70-R
• Compatible Receivers (A/V and IR): DIGI-HDE-R, DIGI-HD60C-R

Why not buy this Intelix DIGI-88B-B STK HDMI/HDBaseT Matrix Switcher - 8 Input x 8 Output today?

Why not buy this Intelix DIGI-88B-B STK HDMI/HDBaseT Matrix Switcher - 8 Input x 8 Output today?