HDTV Supplys WolfPack 4K 1x16 HDMI Splitter with Rack Mount Ears sends one HDMI device to 16 - widescreens. It has a built-in HDMI booster and is 4KX2K @ 30 Hz compliant. The 1x16 HDMI Splitter use a single HDMI source and accessing to multiple HDMI sinks. The 4K 1x16 HDMI Splitter with Rack Mount Ears allows one HDMI devices to be split easily to sixteen HDMI compatible monitors or projectors. The 1x16 Rack Mount Splitter can also be placed at the end of a long HDMI cable to regenerate the HDMI signal. Our 1x16 HDMI Splitter with HDMI 2.0 Compliancy distributes 1-HDMI source to 16-HDMI displays simultaneously. It can handle video up to a 4K at 30 frames per second at 8-bit.

A unique feature of this 1x16 HDMI Splitter is that it has EDID Management to solve EDID problems with its 8-Mode EDID settings which may be necessary whenever you encounter a display on the HDMI output that cannot play audio and video properly over a long distance or the display is too old. Because the HDMI source devices and displays may have various level of capability in playing audio and video, the general principle is that the source device will output the lowest standards in audio format and video resolutions to be commonly acceptable among all HDMI displays. You can force the extender to set the EDID of the lowest capable HDMI display among others to make sure the display is capable to play the HDMI signals normally.

4K 1x16 HDMI Splitter with Rack Mount Ears Features:

One HDMI input signal split to sixteen HDMI devices
3D and HDMI compliant
Supports deep color 30/36bit.
Supports High Definition Resolutions :4KX2K @ 24 HZ, 1080p @ 60HZ, 720p/1080i @ 120Hz.
Supports xv-YCC.
Support deep color 30bit, 36bit
Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC
Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Support signal retiming
Supports HDMI signal retiming with cascadig above 3 layers in full-HD 1080p format and 2D and 3D
Supports an input HDMI cable up to 30 feet @ AWG22 or AWG24 HDMI standard cable length and an output 50 feet @ a AWG22 (preferred) or AWG24 HDMI cable.
No video or audio loss of quality.
Installs in minutes.
Includes power supply

Why not buy this HDMI Splitter 1x16 today?

4K 1x16 HDMI Splitter with Rack Mount Ears Specs:

HDMI resolution: 4k2k@30Hz/3D /1080p/1080i/720p/576p/576i/480p/480i
Supported video color formats: 24bit/deep color 30bit and 36bit
Supported audio formats: DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth: 300MHz
Max baud rate: 3Gbps
Input/Output TMDS signal: 0.5~1.5Volts p-p(TTL)
Input/Output DDC signal: 5Volts p-p (TTL)
Input cable distance: ≤15m AWG26 HDMI standard cable
Output cable distance: ≤15m AWG26 HDMI standard cable
Max working current: 1500mA
Power adapter format: Input: AC (50HZ, 60HZ) at 100V-240V and Output: DC12V2A
Operating Temperature: (-15 to +55℃)
Operating Humidity range: 0.5 to 90%RH (No Condensation)
Dimension (L x W x H): 440*130*45 (mm)
Weight: 1150g

To ensure 3D or 4K content routing through the Matrix, High Speed HDMI cables must be used and any connected non-3D or non-4K compatible display must not have an "active" HDMI output (i.e. powered off or in standby mode). The 4K or 3D source player must not be able to "see" a 2D or non-4K only display connected to the Matrix.

CONNECTING AND OPERATING of HDMI Splitter 1*16
1. Connect one cable from HDMI source devices into HDMI Splitter input.
2. Connect one cable from each display (monitor or projector) into the HDMI Splitter outputs.
3. Connect 5V power supply to the HDMI 1x16 Splitter.

Click Here for Product Warranty