Hall Research UHBX-SW3 VGA, HDMI, MHL Auto-Switching Wall-Plate with HDBaseT™ Kit
Hall Research UHBX-SW3 VGA, HDMI, MHL Auto-Switching Wall-Plate with HDBaseT™ Kit is a kit comprised of a multi-input wall-plate sender and an HDBaseT™ receiver. The wall-plate accommodates 2 HDMI and 1 VGA inputs with audio. The HDMI #1input also supports MHL (Mobile High-Definition Link) with phone-charging feature to allow video presentation from a smart-phone using just a passive cable. The VGA input also accepts YPbPr Component video. The sender can manually or automatically switch between the various inputs and extends the video using HDBaseT™ standard.
To control the power on/off function of the remote display, the wall-plate can generate RS232, and IR control signals which are extended using the same Cat6 cable. Virtually all VGA and HDMI resolutions are supported including 4K (UHD). 4K video can be extended to 330 ft (100m) while 1080p signals can go as far as 500 ft (150m). The wall-plate is powered through the same cable from the receiver using PoH (Power-over-HDBaseT) standard, making installations as simple as possible. The UHBX-R-PSE receiver includes a small power supply and provides HDMI, RS-232 and IR outputs.
To ensure a proper image on the display, the wall-plate's VGA input is scaled to 1080p. This eliminates compatibility issues with various notebook or PC VGA formats that may not be displayable on an HDMI TV if not scaled to a standard HDTV resolution such as 1080p. The user can also configure the unit to pass-through 3.5 mm audio input from an MP3 audio player independent of the VGA signal.
Hall Research UHBX-SW3VGA, HDMI, MHL Auto-Switching Wall-Plate with HDBaseT™ Kit Features:
2 HDMI inputs and 1 VGA input
Supports all HDMI resolutions including 4K (UHD)
VGA input is scaled to 1080p to ensure proper image on all HDMI displays
Manual or automatic input selection
Automatic Control of display power via RS-232
Uses only one Cat6
Distance to 500 ft (150m) at 1080p, or 330 ft (100m) at 4K resolution
Wall plate Uses PoH and does not require a separate power supply
Charges mobile MHL sources while showing video
USB port and free Windows® software for easy configuration
Hall Research NOTE: HDTV Supply supports our Federal, State & Local Governments, Schools, Universities & Military accounts by offering an additional discount if your email address ends in .EDU & .GOV & .MIL & .ORG. Please see Options below.
Why not buy this Hall Research UHBX-SW3 VGA, HDMI, MHL Auto-Switching Wall-Plate with HDBaseT™ Kit today?
Hall Research UHBX-SW3 VGA, HDMI, MHL Auto-Switching Wall-Plate with HDBaseT™ Kit Specifications:
Video Inputs: 2x HDMI (1 MHL), 1x HD15 (VGA or YPbPr)
Video Output: HDBaseT (100m/330ft @1080p)
Video Connectors: HDMI Female, HD15 Female, RJ45 for HDBaseT output
Input Standards: HDMI 1.4, MHL 2.0, DVI 1.0, VESA VGA, NTSC 3.58
HDCP Support: Yes, v1.4 (Repeater)
Video Bandwidth: HDMI 25MHz-300MHz TMDS Clock, VGA 350MHz, YPbPr
HDMI 480p to 4K UHD, MHL to 1080p, VGA 640x480 to 1920x1080, YPbPr
Supports 4K@60 Hz (4:2:0 8 bit color) or 4K@30 Hz (4:4:4 and 8 bit color)
Audio Inputs: Unbalanced stereo audio for VGA input (Line Level)
Audio Connectors: 3.5mm Mini-stereo, Female
Frequency Response: 20Hz ~ 20KHz
Mini-USB (GUI setup)
Programmable push buttons (Input selection and Power toggle)
IR transmit (pass-through or generated)
Auto-switching, auto-power on/off available
External keypad ("Aux CTRL") port
Power Supply: Device is PoH 'PD' (Powered Device); receives power from compatible 'PSE' (Power Sourcing Equipment) Receiver
Power Consumption: (3.0A @ 5V w/UHBX-R-PSE - 15 Watts max)
Mounting: 2-Gang Low Voltage wallplate box, Clearance: 3.7" Horizontal x 2.8" Vertical Opening