Hall Research FHD264-S AV and control over IP Sender with Loop output, Audio, RS232 over IP & IR
Hall Research FHD264-S AV and control over IP Sender with Loop output, Audio, RS232 over IP & IR is a family of HDMI over LAN Senders (encoders) and Receivers (decoders) utilizing advanced video encoding techniques in order to distribute up to 64 Full-HD video signals to hundreds of displays on a simple 1 Gigabit local area network (LAN). They also extend Serial RS-232 communications and IR remote signals. HDMI Audio is extracted and available on a convenient 3.5mm stereo jack on both the Sender and the Receiver. The FHD264-S Sender also provides local HDMI output.
Each device provides a two-line front panel LCD that can be used to easily configure or monitor parameters such as IP settings, multicast group selection, assignment of device names, and more. This eliminates the usual installation challenges of finding and configuring devices on the network for the first time. With the front panel LCD, users can see and assign configuration parameters with ease.
The RS-232 serial ports on each unit can be used in SoIP mode (Serial over IP). This allows 3rd party IP controllers to directly control peripheral equipment via RS-232. For example if the RS-232 of a receiver is connected to a video projector, you can turn the projector on or off via telnet commands sent to the FHD264 Receiver.
All devices support IEEE 802.3af PoE (Power over Ethernet). So when connected to a network switch with PoE, no power supply needs to be connected to the FHD264 devices. A power supply is included for customers that may not have PoE on their network.
Hall Research FHD264-SAV and control over IP Sender with Loop output, Audio, RS232 over IP & IR Features:
Create a virtual video matrix with up to 64 Senders and 250 Receivers
Works on affordable 1Gig network infrastructure
Front panel LCD for configuration of IP parameters, and status indication
HDMI loop output connector on FHD264-S Sender
HDMI Audio output on each device using 3.5mm stereo connector
PoE ready. Power supply not needed when connected to LAN with PoE
Fail-safe back up video designation to create automatic redundancy
Serial Over IP(SoIP) to control external equipment via the Serial port
Receivers include small IR remote controller for switching channels
Easy to use WebGUI in each unit, accessible from any browser
IR (infra-red) extension from Receiver to Sender
User selectable streaming bit rate
User-definable name for each device (e.g. Lobby Monitor, Training PC)
Supports SD, HD and Full-HD (1080p@60 Hz) resolutions
Free Windows PC Manager Tool software (for system-wide control)
Hall Research NOTE: HDTV Supply supports our Federal, State & Local Governments, Schools, Universities & Military accounts by offering an additional discount if your email address ends in .EDU & .GOV & .MIL & .ORG. Please see Options below.
Why not buy this Hall Research FHD264-S AV and control over IP Sender with Loop output, Audio, RS232 over IP & IR today?
Hall Research FHD264-S AV and control over IP Sender with Loop output, Audio, RS232 over IP & IR Specifications:
Input Resolution:VGA or 480p to Full HD 1080P@60, 640x480@60, 800x600@60, 1024x768@60, 1280x1024@60 1440x900@60, 1680x1050@60, 1360x768@60, 1366x768@60, 1400x1050@60, 1680x1050@60, 1920x1080@60
Video Encoding: H.264
Streaming Protocol: RTP/MPEG-TS/UDP
Control Interface: Telnet, Embedded Web Server
Video Latency: 250-400 mS, dependant on Bit Rate and network congestion
Sender: 1x HDMI
Receiver: 1x RJ45, 1x IR
Wall Plate: 1x HDMI
Sender: 1x RJ45, 1x IR, 1x L/R AUDIO, 1x RS-232
Receiver: 1 x HDMI, 1 x L/R AUDIO, 1 x RS-232
Wall Plate: 1 x RJ45, 1 x IR, 1 x L/R AUDIO, 1 x RS-232