This Dynacord C1800FDI-US 70V/100V Installation DSP Power Amplifier with FIR Drive is a 1900W audio amplifier designed for permanent installation applications, to provide background or live music in venues including bars, houses of worship, restaurants, sports facilities, and performing arts centers. The C1800FDi is equipped with a robust power supply and a powerful linear amp design, well suited for the most demanding environments. The sophisticated protection circuitry ensures safe, reliable operation under all conditions. The amplifier is also suitable for direct drive applications with 70/100V speaker lines for a variety of flexible install scenarios.
The C1800FDi features Euroblock connectors for convenient wiring, remote power-on delay, and GPIOs to interface with third-party controls. An efficient standby power mode reduces running costs and power consumption by up to 90%, leading to a low cost of ownership. The amplifier utilizes high-quality components throughout for truly professional processing power and performance characteristics. The on-board DSP includes multi-band PEQs (parametric EQ), crossovers, limiters, and delay per channel. It also has true channel grouping control with extra DSP capabilities like PEQ, GEQ (graphic equalizer), and delay for each group. The Dynacord C1800FDi ships with a power cord, USB cable, and a variety of Euroblock & power remote connectors.
Dynacord C1800FDI-US 70V/100V Installation DSP Power Amplifier with FIR Drive Features:
- Installation DSP amplifier, Euroblock connectors
- Fully integrated professional speaker processing with FIR Drive technology
- Market leading acoustic performance and rock solid reliability
- Low Z and 70/100V operation and power saving standby mode
- Intuitive system control software, makes setup and control easy
Why not buy this Dynacord C1800FDI-US 70V/100V Installation DSP Power Amplifier with FIR Drive from HDTV Supply today?
Dynacord C1800FDI-US 70V/100V Installation DSP Power Amplifier with FIR Drive Specifications:
- Load Impedance: 2Ohm, 2.6Ohm, 4Ohm. 8Ohm
- Maximum Output Power:
- Single Channel: 2Ohm:1600W; 2.6Ohm:1300W; 4Ohm: 950W 8Ohm: 480W
- Dual Channel:
- Load Impedance: 2Ohm=1400W; 2.6Ohm=1200W; 4Ohm=850W; 8Ohm=450W
- High Impedance: 70V Operation=2x 1250W
- Maximum Output Power, Bridged Load Impedance: 4Ohm=2800W; 8Ohm=1700W; High Impedance: 70V Operation=1x 600W; 100V Operation=1x1250W
- Maximum RMS Voltage Swing, THD = 1%, 1kHz: 65.1V
- Voltage Gain ref.1kHz: 32.0dB
- IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%
- DIM 30: < 0.05% (3.15 kHz, 15 kHz)
- Maximum Input Level: +21dBu
- Crosstalk: < -80dB (ref. 1 kHz, at 100 W/4 Ohm)
- Frequency Response: 10 Hz to 21 kHz (±1 dB)
- Input Impedance, active balanced: 20kOhm
- Signal-to-Noise Ratio (A-weighted): >105dB
- Output Noise , A-weighted: < -68dBu
- Output Stage Topology: Class AB
- Power Requirement: 240 V, 230 V, 120 V or 100 V; 50Hz to 60 Hz (factory configured)
- Power Consumption: 700W (? Maximum Output Power @4Ohm)
- Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
- Cooling: Front-to-rear, 3-stage-fans
- Safety Class: I
- Available Color: Black
- Dimensions (HxWxD): 3.46" x 19.02" x 18.2" (88 x 483 x 462.4mm)
- Weight Net: 33.51lbs (15.2kg)
- Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance
- Mains Fuse: 240 V/230 V: T10AH; 120 V/100 V: T20AH
- Operating Temperature Range: 40°F to+105°F (+5°C to +40°C)
- Remote Power ON/GPIO: Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection
- Total Harmonic Distortion: < 0.05% (at 600 W/4 Ohm MBW = 80 kHz, 1kHz)
Why not buy this Dynacord C1800FDI-US 70V/100V Installation DSP Power Amplifier with FIR Drive from HDTV Supply today?
Dynacord C1800FDI-US User Manual
Why not buy this Dynacord C1800FDI-US 70V/100V Installation DSP Power Amplifier with FIR Drive from HDTV Supply today?
Videos Hide Videos Show Videos
-
Dynacord U Series Amplifiers and Mixer amplifiers
Dynacord introduces the U Series for commercial installations ...
-
Dynacord V600:2 commercial amplifier - Introduction
Discover the new V600:2, the latest addition to the V Series c...
-
Dynacord V Series amplifiers - Introduction
Introducing the latest addition to the V Series amplifier fami...
-
Dynacord V Series amplifiers - How to configure the V600:2 and V600:4
Learn how to configure Dynacord’s V Series amplifiers for some...
