This DVIGear DVI-2305-SHRD Dual-Link DVI-D Super High Resolution Copper Cables, 5 Meters are engineered for unsurpassed performance and reliability in mission critical applications
These cables are designed to transport high resolution digital Dual-Link DVI signals with bit rates up to 3.30 Gbps. over very long distances while maintaining pristine signal / bit integrity.
High-Speed Signals — Long distance transport of high resolution Dual-Link DVI signals over copper cables must overcome several challenges, such as insertion loss, differential skew and jitter
Insertion loss is caused by cable capacitance, which acts as a low-pass filter, blocking higher frequency signal components from passing
Skew occurs when the differential Dual-Link DVI signals are delayed and become out of phase as they pass over a long cable
Both factors contribute to increased digital jitter, which degrades the performance of the cable. This jitter becomes more severe with higher resolutions and longer cable distances
Conventional cables that support lower resolutions at short distances are often unable to support the data rates required by higher resolutions at longer distances
The resulting video can be disrupted by visual artifacts or may not be visible at all.
Advanced Design — Built to overcome these challenges, the SHRD Series Dual-Link DVI Cables are constructed using heavy gauge 22AWG copper wires
This increases the cross-sectional cable area and decreases the capacitance of the cables, which allows signals with higher data rates to pass with minimal jitter
When coupled with an active cable extender (equilizer), cable lengths of up to 200 ft. (~ 60 meters) are possible while maintaining full compliance with Dual-Link DVI signal parameters
The combination of these products are active copper cables with minimal insertion loss and skew
These cables rival the performance of fiber cables at a fraction of the cost, while providing superior ruggedness and durability.
DVIGear DVI-2305-SHRD Dual-Link DVI-D Super High Resolution Copper Cables, 5 Meters Features:
- Cables 20 meters (~65 ft.) or longer require an active cable extender
- Support PC resolutions up to 3840x2400 / 60 Hz at cable lengths up to 60m
- Support data rates up to 3.30 Gbps. at lengths up to 60m
- Supports both Dual-Link and Single-Link DVI formats
- Heavy-duty 22AWG copper wires provide minimal insertion loss
- Ultra-low Skew guarantees unsurpassed digital fidelity
- Triple shielded for superior noise immunity
- Dual UL Ratings: UL13 (CL2) and UL758 (AWM20276). These cables are in-wall rated.
- RoHS compliant (green friendly)
- Gold flash plated connectors
Why not buy this DVIGear DVI-2305-SHRD Dual-Link DVI-D Super High Resolution Copper Cables, 5 Meters today?
DVIGear DVI-2305-SHRD Dual-Link DVI-D Super High Resolution Copper Cables, 5 Meters Specifications:
- Model
- Product Designation: SHRD
- Product Description: Dual-Link DVI-D 22AWG Cables
- Connectors
- Input / Output Connectors: 24+1 DVI Male Connectors
- Contacts: 25 pins, 30μ Gold Plated, long life design
- Shell: Gold Flash Plated
- Performance
- Standards Compliance: DVI 1.0 (Single-Link and Dual-Link)
- Maximum Pixel Clock Frequency: 165 MHz
- Maximum Bit Rate (per Channel): 1.65 Gbps
- Maximum Bit Rate (Aggregate): 4.95 Gbps
- Supported HDTV Resolutions: 1080p / 60 Hz with 8-bit color
- Supported Single-Link PC Resolutions: Up to 2048x1080, 1920x1200
- Supported Dual-Link PC Resolutions: Up to 3840x2400
- Cable Equalization: For best results use an active cable extender for cables 20 meters (~ 65.6 ft.) and longer.
- Typical Parametric Data
- Voltage Rating: 75 V
- Differential Impedance: 100 ohms ± 5%
- Insertion Loss (SDD21): < 32 dB @ 825 MHz with 60 meter cable
- Intra-pair Skew: < 2.2 nsec (from 250 MHz - 2.5 GHz) with 60 meter cable
- Inter-pair Skew: < 150 psec (from 250 MHz - 2.5 GHz) with 60 meter cable
- Far End Crosstalk (FEXT): < -20 dB
- Propagation Delay: 4.55 nsec/meter
- Mechanical
- Construction: 26 Conductor Cable with 7x high speed twisted pairs
- High Speed Conductors: 22AWG, FM-PE+SKIN Construction
- Shielding: Triple Shielding
- Jacket Material / Color: PVC / Metallic Gray (Pantone 8401C)
- Outside Diameter: 14.00 ± 0.30 mm
- Minimum Bend Radius: 53.0 mm
- Environmental
- Operating Temperature: -13° to 140° F (-25° to 60° C)
- Storage Temperature: -40° to 167° F (-40° to 75° C)
- Humidity (storage / operating): 10% to 90% (non-condensing)
- Regulatory Approvals
- Compliance: UL13 (CL2)
- UL758 (AWM20276)
- RoHS
- UL File Numbers: AVLV2.E245407
- AVLV8.E245407
- QPTZ.E245576
Why not buy this DVIGear DVI-2305-SHRD Dual-Link DVI-D Super High Resolution Copper Cables, 5 Meters today?
DVIGear DVI-2305-SHRD Specifications
Why not buy this DVIGear DVI-2305-SHRD Dual-Link DVI-D Super High Resolution Copper Cables, 5 Meters today?
Will this cable carry Dual-Link DVI signals?
A: Yes — the DVI-2305-SHRD supports both Dual-Link and Single-Link DVI formats.
What pixel clock and per-channel bit rates does it support?
A: The cable supports a maximum pixel clock of 165 MHz and a per-channel bit rate of 1.65 Gbps.
What maximum PC resolutions are supported over Dual-Link and Single-Link?
A: Dual-Link PC resolutions are supported up to 3840x2400, and Single-Link PC resolutions are supported up to 2048x1080 and 1920x1200.
Does this cable support 1080p at 60 Hz?
A: Yes — it supports 1080p at 60 Hz with 8-bit color.
What construction and shielding does the cable use to control insertion loss and skew?
A: The cable uses heavy-gauge 22AWG conductors, a 26-conductor construction with 7 high-speed twisted pairs, and triple shielding to minimize insertion loss and noise.
What measurable signal integrity numbers are given for a 60-meter cable?
A: For a 60-meter cable the listed insertion loss is < 32 dB @ 825 MHz, intra-pair skew < 2.2 nsec (250 MHz–2.5 GHz), and inter-pair skew < 150 psec (250 MHz–2.5 GHz).
Is this cable rated for in-wall installation?
A: Yes — the cable carries dual UL ratings (UL13 CL2 and UL758 AWM20276) and is described as in-wall rated.
Can I use a 5-meter DVI-2305-SHRD cable for high-resolution displays without an equalizer?
A: Yes — the 5-meter cable length itself does not require an active extender, and the cable is designed to carry high-resolution Dual-Link DVI signals at shorter distances.
Will this cable tolerate normal operating room or studio temperatures?
A: Yes — the cable's operating temperature range is −13° to 140° F, which covers typical studio and many equipment room environments.
Are the connectors plated for durability and contact reliability?
A: Yes — the cable uses gold flash plated shells and contacts described as 30μ gold plated for long life.
Does the cable claim fiber-like performance and ruggedness?
A: The product description says these active copper cables rival the performance of fiber at a fraction of the cost while offering superior ruggedness and durability.

