This DVIGear DN-300T DisplayNet SDVoE Transceiver delivers flawless HDMI video distribution with limitless scalability, zero-frame latency and zero image artifacts.
These units support near-seamless switching and distribution of HDMI signals with resolutions of up to 4K/60p (4:4:4) with 8-bit color, or 4K/60p (4:2:2) with 10-bit or 12-bit color.
Like other DisplayNet products, the DN-300 Series provides independent multi-layer routing of HDMI audio and video signals, as well as bidirectional Analog Audio, USB, IR, RS-232, and 1GbE Ethernet.
Feature Rich - The DN-300 Series provides a host of unique features, such as switchable transceiver operation, PoE+ support, and dual (copper / fiber) network interfaces that enable signal extension distances of up to 100 meters (328 ft.) with CAT-6A twisted pair, and up to 30 KM (18.6 miles) with single-mode fiber.
DN-300 Series units include auxiliary H.264/5 video output streams that provide support for viewing source thumbnails and for remote viewing / recording with resolutions of up to 1080 /30p.
Furthermore, these units provide silent, fanless operation, powerful network security features, and versatile KVM Routing with full-bandwidth USB 2.0 on the DN-300T and rapid USB HID device switching on the DN-300H.
DN-300 Series units are housed in ultra-compact, low-profile cases that allow up to 4x units to occupy a single 1U of rack space.
This makes them ideal for high density applications where rack space can be limited.
Like all DisplayNet units, they include advanced, software-defined MultiViewer and Video Wall engines that enable a wide range of applications without the expense and complexity of ancillary products.
Limitless Expandability - Unlike traditional matrix switchers, DisplayNet systems have no limits or restrictions on the size or design of an AV distribution system; the matrix array can be as large as the number of non-blocking ports on the network.
Stacked switches enable very large systems with several hundred ports at a low marginal cost.
Exceptional Versatility - The DN-300 Series utilizes DisplayNet Server, which provides a highly intuitive web-based UI and a powerful API that makes setup and maintenance of these units incredibly fast and easy.
Highly advanced features enable effortless integration with third-party controllers as well as full interoperability with other SDVoE products.
Thanks to its ultra-compact, low-profile design, exceptional capabilities and outstanding array of features, the DN-300 Series enables system designers to develop and implement highly versatile AV signal distribution systems with robust performance and scalability at a very competitive price.
DVIGear DN-300T DisplayNet SDVoE Transceiver Features:
- Silent, Fanless operation
- Switchable Transmitter / Receiver operation (all DN-300 models), or bi-directional Transceiver operation (DN-300T)
- Includes dual (copper / fiber) 10G network interfaces
- Includes two independent H.264/5 video output streams
- Versatile KVM routing with full-bandwidth USB 2.0 support
- Supports PoE+ (802.3at) over the 10GbE RJ-45 connector
- Long Range – up to 100 meters (328 ft.) using CAT-6A cabling, up to 30 km (18.6 miles) using single-mode optical fiber
- Highly Scalable – supports systems from a few ports to hundreds; only limited by the size of the network switch
- Supports HDMI resolutions up to 4K /60p with 8-bit color (4:4:4) and 4K /60p with 10 or 12-bit color (4:2:2 or 4:2:0); supports HDCP 2.2
- Independent multi-layer routing for HDMI Video, HDMI Audio, bidirectional Analog Audio, USB, RS‑232 and IR
- KVM Support – DN-300T offers full-bandwidth USB 2.0 routing, whereas DN-300H allows for instant switching of USB HID devices at a reduced cost and with advanced software features.
- Ultra-compact case – up to 4x units can be mounted in 1U rack space; horizontal and vertical Rack Mount Kits are available
Why not buy this DVIGear DN-300T DisplayNet SDVoE Transceiver today?
DVIGear DN-300T DisplayNet SDVoE Transceiver Specifications:
| Supported AV Signals | |
| Video |
DN-300H: Supports transmitting or receiving HDMI 4K /60p signals (single direction)
DN-300T: Supports simultaneously transmitting and receiving HDMI 4K /60p signals (bidirectional) |
| HDCP | Supports HDCP 1.4 / HDCP 2.2 |
| Color Space | RGB, YCbCr 4:4:4 / 4:2:2 / 4:2:0 |
| HDR Support | HDR, HDR10, HDR10+, Dolby Vision, HLG (only in Genlock Mode) |
| H.264 / H.265 Output Streams | Primary Stream: supports H.264 / H.265 encoded streaming video in Transmitter or Transceiver Mode with output resolutions up to 1080/30p, also supports 4K /60p downscaling. Adjustable bit rates from 1–20 Mbps. Secondary Stream: supports H.264 / H.265 encoded streaming video in Transmitter or Transceiver Mode with output resolutions up to 540/30p, also supports 4K /60p downscaling, Adjustable bit rates from 128–2048 kbps.
|
| Thumbnails | Supports PNG thumbnails with 180 lines of vertical resolution at 1 frame per second when used in conjunction with DisplayNet Server (DNS-20) |
| HDMI Embedded Audio |
DN-300H: Supports transmitting or receiving embedded HDMI audio signals (single direction)
All Models: Support pass-through of embedded HDMI audio including up to 8 channels of LPCM or HBR audio formats such as: Dolby Digital, Dolby Digital Plus, Dolby Digital EX, Dolby True HD, Dolby Atmos, DTS, DTS-HD HR, DTS-HD Master Audio, DTS:X, DSDDN-300T: Supports simultaneously transmitting and receiving embedded HDMI audio signals (bidirectional) |
| De-Embedded Audio | Supports independent routing of de-embedded HDMI audio: Up to 8 channels of LPCM digital audio with up to 24-bit depth and 192 kHz sampling rate |
| Downmixed Audio | Supports independent routing of 2-channel de-embedded / downmixed HDMI audio. Requires input signal to be PCM audio format |
| External Audio | Supports independent bi-directional routing of analog stereo audio converted to PCM with 24-bit depth and a fixed 48 kHz sampling rate |
| Ethernet | Built-in 1GbE Ethernet switch on all Tx and Rx units supporting 10 Mbps. up to 1 Gbps. |
| USB Control | DN-300H: Supports USB HID device extension and routing with instant switching and advanced software features DN-300T: Supports switchable High-Speed USB 2.0 (480 Mbps.) extension with virtual hub functionality (up to 7 RX units per TX unit) |
| IR Control | Supports bidirectional IR switching |
| RS-232 Control | Supports bidirectional RS-232 switching via UART interface with up to 115,200 baud |
| Connections / Indicators | |
| 10GbE Port (1) | 1 ea. shielded RJ45 connector with LED indicators, and 1 ea. Fiber Optic SFP+ slot (populated with SFP+ module sold separately) |
| HDMI Input / HDMI Output | 2 ea. 19-pin Female HDMI connectors |
| Analog Stereo Audio Input / Output | 2 ea. 3.5mm Stereo Mini-Jacks |
| 1GbE Port | 1 ea. shielded RJ45 connector with LED indicators, bridged to 10GbE network |
| USB 2.0 | DN-300T: Supports 480 Mbps USB 2.0 extension and routing USB Host: 1 ea. USB 2.0 Type B connector USB Devices: 2 ea. USB 2.0 Type A connector DN-300H:
see USB HID |
| USB HID |
DN-300T: USB 2.0DN-300H:
Supports USB HID (only) extension and routing with instant switching and advanced software featuresUSB Host: 1 ea. USB Type B connector USB Devices: 2 ea. USB Type A connector |
| RS-232 | 1 ea. 4-pin, 3.5 mm pitch, Phoenix connector |
| IR Control | IR IN: 1 ea. 3.5 mm Stereo Mini-Jack IR OUT: 1 ea. 3.5 mm Mini-Jack |
| DC Power | 1 ea. 5.5 mm / 2.1 mm female screw-locking connector |
| Front Panel Controls | 1 ea. Reset push-button to restore factory default values 1 ea. Mode Switch push-button to switch between TX, RX and TRX (Transceiver)(5) Operating Modes |
| Front Panel LEDs | Power, Status, Link, Video, USB, TX Mode, RX Mode |
| Performance | |
| Supported Resolutions (2) | Up to 4K /60p with 8-bit color (4:4:4) Up to 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0) |
| Maximum Pixel Clock Freq. | Supports pixel clock rates up to 600 MHz |
| Maximum Video Bit Rate | Supports digital signal bit rates up to 6.0 Gbps./color, 18.0 Gbps. Total |
| Switching Layers | Independent switching layers for all connected Video, Embedded Audio, Analog Audio, HDMI and Downmixed Audio, RS-232 and IR |
| Video Signal Latency (3) | Genlock: ≤ 30 μsec. (uncompressed), ≤ 120 μsec. (compressed) (3) Genlock Scaler: 3.0 msec. Fast Switch: 1–2 Frames Video Wall: 1–2 Frames MultiViewer: 1–2 Frames |
| Supported I/O Switching Array | Size of I/O array is only limited by the size (number of ports) of the 10GbE network switch |
| Recommended CAT Cable | CAT-6A S/FTP (500 MHz) AWG 23, or CAT-7 (Europe); Compliant with TIA/EIA-568B termination standard |
| Maximum Cable Distance | Up to 328 ft. (100 meters) using CAT-6A S/FTP (500 MHz) AWG 23 cable Up to 30 km (18 miles) using SMF SFP+ optical modules |
| HDMI Input Cable Equalization | Supports DVIGear's HR™ Series HDMI with cable lengths up to 10 meters at 4K /60p resolution |
| Operational Modes (4) | |
| Operating Mode | Switchable between TX, RX and TRX (Transceiver)(5) Operating Modes – either by front panel control or API command |
| Matrix Switching Mode | Fully non-blocking cross-point routing of nearly any size I/O array – only limited by size of 10GbE switch |
| Video Wall Mode | Supports Advanced Video Wall displays using integrated scaling engine in the RX. Supports asymmetric walls with crop, scale, and letterbox modes |
| MultiViewer Mode | Supports customizable MultiViewer displays with up to 32x sources using integrated scaling engine in the TX(6) |
| Point-to-Point Mode | Supports Point-to-Point Extension up to 328 ft. / 100 meters (CAT6A) or 18 miles / 30 km (single-mode fiber) using recommended cables and SFP+ modules |
| Power | |
| Typical Power Consumption | 13.5 watts |
| External AC Power Adapter | Input: 100–240VAC, 50–60Hz / Output: +12VDC @ 2.5A |
| Power-over-Ethernet | Supports PoE+ (802.3at) over the 10GbE RJ-45 connector. Unit may be used with either optical or fiber network connectivity with PoE+ power source |
| DC Power Output | 2.5 watts – 5VDC @ 500 mA on HDMI pin 18 |
| Mechanical | |
| Construction | Heavy-duty steel enclosure with jet black finish |
| Dimensions (H x W x D) | Each Unit: 0.85" x 8.1" x 5.3" (21.7 mm x 204.4 mm x 134.5 mm) |
| Weight | Each Unit: 1.53 lbs. (692 g) |
| Environmental | |
| Operating Temperature Range | +32° to +104° F (0° to +40° C) |
| Maximum Case Temperature | Top of Case: Bottom of Case: TX or RX Mode: 110°F (43° C) TX Mode: 117° (47° C) / RX Mode: 134° F (57° C) |
| Storage Temperature Range | -2° to +140° F (-20° to +60° C) |
| Operating / Storage Humidity | 10% to 90% (non-condensing) |
| Regulatory Approvals | |
| TX / RX Unit | FCC, CE, RoHS, REACH |
| External AC Power Adapter | CE, GS, UL, cUL, DOFT, CCC, TUV, PSE, KCC, CB, RoHS, REACH, WEEE |
| Warranty | |
| Limited Warranty | 3 Years Parts and Labor |
| Model Numbers | |
| DN-300H | DisplayNet SDVoE Transmitter / Receiver USB HID |
| DN-300T | DisplayNet SDVoE Transceiver |
| DNS-20 | DisplayNet Server Rack-mountable Linux Server with DisplayNet API and DisplayNet Manager software |
| Accessories | |
| Included | 1x External AC Power Adapter (per unit) 2x Mounting Brackets with Screws (per unit) 1x 4-pin RS-232 Phoenix Connector (per unit) 1x IR Transmitter 1x IR Receiver |
| Optional | DisplayNet Server (Model DNS-20)(7) External AC Power Adapter with USA, Euro, UK, or Australia Plugs Power Distribution Unit, 8x 12VDC (DVI-7520-PDU) IR Transmitter (DVI-7360-IR-TX), IR Receiver (DVI-7362-IR-RX) 1U Rack Mount Kit for 1-4 units (DN-300-RMK) 6U Vertical Rack Mount Kit for 1-10 units (DN-300-RMKV) DVI-I Female to HDMI Male Adapter Cable (DVI-8511c) |
