This DVDO H264/5-Decoder IPAV Decoder with H.264/5 can transmit uncompressed 1080p @60Hz video signal up to 100m over a Cat 6a/7 cable. It can self-adjust to operate as a transmitter and/or a receiver to adapt to the detected input signal; no additional operation is required. It also supports dual video streaming and HDMI loop-out. Bidirectional RS232 and IR are also available. Audio out port supports audio pass-through or audio de-embedding output.

DVDO H264/5-Decoder IPAV Decoder with H.264/5 Features:

Entry level IPAV solution
Works easily with an Ethernet switch, no need to configure; real plug and play solution
Supports high-efficiency H.264/265 video codec
Effortless preview management: drag-and-drop sources to the desired displays for visual control
Easy to build an IP matrix or a video wall
The decoder has a built-in scaler to achieve fast and seamless switching
Independent RS232 route
Supports HDMI input and output resolutions up to 1080p
Supports dual HDMI video streaming or HDMI loop-out to local display.
Extends 1080p signal up to 80m over a Cat 5e/6 cable and up to 100m over a Cat 6a/7 cable.
Analog audio port supports pass-through or audio de-embedding output.
Bidirectional IR and RS232 pass-through
USB 2.0 pass-through up to 480Mbps data rate.
Provides front panel, RS232 and LAN control options.
Bidirectional PoC capable - power adapter connected to either side can power both transceivers. (Note: It is recommended that you connect the power adapter to the transceiver at USB Device side before you use USB function.)